Pass Your Microsoft 70-640 Exam Easy!

used XOR, about 75% of questions were on exam, passed with 812 in US. Thx!

any link for Xor's exam

UK - Used XOR's vce. 10 new questions. Passed barely but pass is a pass.

Passed today with 8** . Many Thanks to XOR

Used Xor's. 100% Valid in Israel. Passed with 812.
100% of the exam questions where included in the dump. 10/10 Highly recommended.

Used XOR dump, still valid in US. Might have been some new questions, but all appeared to be from the dump.

This dump is valid also learn it together with the rock 575 newest version and you will pass it without the rock idk if you will pass.

90% Valid,some questions have been changed from the XOR dump and have different answers.DNS, ADCS and some tools and trust scenarious. 66 total for 150 minutes. Read the book and play with the tools so you understand them. Good luck!

i will take exam next week , what it is must i'm study ?

Valid . Passed today with 752

Passed today with 752 . Many Thanks to
FalconVenomous and Rock

Passed this exam over 8##. Using XOR dump & self studie
Thanks a lot XOR . Total 66, 10 new question.

The XOR dump from this link is valid 100%. Today I have passed with 765 marks. Only 4 to 6 questions are out of dump.

Ruben in the exam have answers drag and drop? Thanks and congratulations

Ruben in the exam have answers drag and drop? Thanks and congratulations, hay en el examen preguntas de arrastrar? o otras que no sean tipo test? gracias

I have pass the exam yesterday in SPAIN with 856 score, I used FalconVenomus489 and the last 75 of The Rock. Be careful with the 75 last of the Rock some of them are wrong.

Let me know the types of questions asked in this examination

Apologize for that. Please try this one. I have checked the code and its working. Code: CEWSNE

Hello,
Here's the link to XOR's dump. I believe that's the latest and most accurate dump so far.
Practice & Study hard

http://www.sendspace.com/file/k4zx8v

Hi Shawn, code is invalid. Please advise I would write the exam on friday next week. manythanks!

passed with 830 do rock75+falcon 100% valid.. in india

I just wrote exam today and it's still valid here in Canada and I scored 804 , as advice read the flacon dumb very we'll plus the last 75 questions of rock dumb , some oft he answer of rock's question are duplicated with diff answer and lots of incorrect answers so read the flacon very we'll and the last 75 Qs of the rock and trust me you will pass cuz I didn't pass in the first time cuz I just read the falcon questions . Good luck

this dump is 100% valid in india, passed exam today

The Xor dump is valid in USA. I have uploaded Xor dump on the following link: from http://upload.avanset.com/
click on Get access by code: FPYCST

Earlier the retirement date for this Exam was Jan 31st, but now currently there is no retirement date atleast upto JUNE 2014, as confirmed by a MS Exam support rep. Can someone please explain what is Xor dump?

does anyone have a recommendation on what dump is most current for US. I have taken and fail test while in AFG.

Dump still valid. The dump is the same as XOR. Use XOR instead. Passed my exam today. Be aware some questions are rephrased and others instead of choose 2 coorect answers are choose 3 ??? . Memorizing q/a won't cut it.
Also, exam is 68 (not 50) question in 2hr. Good Luck

HI please send me the link to falcon and XOR. Thanks.

Please can someone send me the XOR dump. Is it valid in South Africa?

Hi Guys, Can anyone please give me a link to the XOR dump and also... When exactly does this exam retire? I have checked the Microsoft website but nothing is indicated.

Thank you in advance

Can any one pleas and me the dumb or the link for XOR exam cuz I wanna write the exam on this Friday and I really need to pass it this time cuz I wrote it before and I didn't pass :(
This is my email a_h_kk@hotmail.com
Thanks a lot

Passed the exam today. I have used Xor-s dump and the trainsignal videos. Most of the questions from xor dump. The Rock is the same dump as xor dump so it should work too. xor-s / The Rock dump both valid for this exam. Thanks you all for the comments and dumps. The exam is retiring soon so Good luck for everyone.

Passed Saturday 01-25-2014 with 791 .Use xor-s dump it's still valid and trainsignal's videos.

On question Exam G, Q12
It states you need to view the most revent user accounts authenticated by RODC1 it says the answer says C. From Active directory users and computers, right click contoso.com, click change domain controller and then connect to DC1.

I went to the technet article and viewed the screen shots provided can come one explain to me why you would connect to the DC1 rather then the RODC1, the image shows Accounts that have been authenticated to this Read-Only Domain Controller.

Any explanation is greatly appreciated.

Hi There!

Passed the exam with 756 points. Use xor-s dump it's still valid. Use the Microsoft book as well. If you got the chance and you are a beginner in this trade visit a teacher who can explain you what where and why to do it. Otherwise it is weary hard to study it on your own.

Good luck

Ollie

Hi guys. Please send me dumps of xor, falcon and rock.

Passed the exam yesterday, I used Xor-s dump and the 70-640 book. Be prepared for a lot of certification questions. Most of the questions was from xor-s dump look up for the link in the comments and use it. Good luck for everyone.
regards
O

Hello Kyle, what is the last date of the 70-640 exam actuality?
Regards

is this dump still valid?

@Guest and Johns: Let me have your emails and i will send you the XOR dump and you can check it online for viruses if you are afraid. i scheduled to take 70-640 this saturday :).

Passed with 804 today, at last MCITP certified, keep learning maybe the MCSE later, who knows! For the dump, there is not much days for the deadline about this certification now, so I don't think microsoft will add any new questions on the exam. And I can pretty sure if you learn this dump well, there is no chance to be failed, again, keep learning, and thanks for the ppl who shared their experience.

HI,

iam unable to open the file in visual certifacate manager. it is giving error as older version. can you guys help me how can i open this file. with newer version iam unable to see all the questions


thanks
madhu

Passed the exam today with 830 score. Feeling good. Thanks everyone.

Hi guys, sorry but what is XOR´s dump?
thanks

Can someone give me a good link for XOR's exam plz?

I am looking to take this exam soon in the USA. I am having a hard time opening XOR vce. Could someone provide me with the link. Also how valid is this current dump.

Passed this on 1/6 on with an 800 score. The only dump I used was XOR's, and I used CBT Nugget videos.

My test had 68 questions, and I'd say close to 20 of them involved CA. There were two groups of same answer questions (involving CA) that are NOT in his .vce, plus at least 10 other questions that aren't either (but similar to ones that are). Since the XOR dump is a combination of FalconVenomous and The Rock, it's safe to say that these questions are not in "any" of them. So, using the dump alone and/or not knowing your stuff could result in a fail. Oh, and I had at least five questions regarding FSMO roles.

XOR is a badass.

thanks FV, rock and XOR.. passed this exam in India, today

This Dump has all the questions but a lot of the answers are incorrect. I followed the advice from other users and used XOR dump I passed with a score of 713 and that's because I was confused from studying too many dumps.
Stick to XOR and you will pass with a high score.

Thanks to The Rock (final 75) FV, and XOR for compiling it all into one place. I just which I had found XOR's dump earlier in my prep to take the exam. All but 5 questions were in XOR's dump for me.

I took the exam and got 882.
I used XOR's braindump posted earlier, studied from the Microsoft Press study book, and used practice exam questions provided by Microsoft and other services.

I'd say most of the questions on my exam were from XOR's version of the dump, but there were some news ones such as asking about what tool to use when doing various tasks on an Enterprise CA. Some of the options on the multiple choice were different also. Don't just memorize the answers but understand why they are right. XOR's dump has explanations that taught me a lot.

Thanks to the people that made these dumps possible. Study hard!

Allhamdullilah <3 Passed Today With 882 Marks Dump Is 100% Valid Last 75 Questions From This Dump Rock + Falcon Venonemous Dump.. Got 68 Questions and only 4 Questions Are new From DNS ...

Try This Below Link This Dump is By XOR mixture of FV + 75 Questions From Rock Dump Duplicate Questions Removed And Questions Are in Sequence with rite answer

http://www.sendspace.com/file/k4zx8v

And Thank you FV , Rock , Waywonderer , Ray , XOR ...

Hi XOR,

Is the file you linked on 12/17 (the one you said was the final version) a complete .VCE of FalonVenmous plus the last 75 of TheRock, with all the corrections and everything? Is it a one-stop-shop of the recommended .vce's for this exam? If so, I love you and thanks!!!

Someone please let me know if the answer to my questions is "yes". If so, I'll be going nuts on this file for the next few weeks.

@ruben - I googled all the questions myself, and in result agree with Ray except for the questions I listed
@abde - don't overwise, just read on the Wiki what is the infrastructure master function http://en.wikipedia.org/wiki/Flexible_single_master_operation
@XOR - don't you have a pdf of your dump? (I've got an older version of the Visual Certexam Suite)

@XOR I download d file but its not loading in my visual certexam suite. that its an incorrect file type or its corrupted

Can anyone point me 2 a valid dumb file for Network infrasture 70-642? Thanks in advance

Can anyone tell me if this dump is valid in the UK

Here is my latest (and probably last) version of the file.
Not sure why it isn't showing up in the downloads section.

http://www.sendspace.com/file/k4zx8v

900+ with this.

@abde

The answer for Q522 is D. Transfer the infrastructure master role from DC3 to DC2.

http://technet.microsoft.com/en-us/library/ff646933(v=ws.10).aspx

The infrastructure master for this domain should be held by a domain controller that is not a global catalog server.

Issue
The infrastructure master operations master role (also known as flexible single master operations (FSMO) role) and the global catalog are held by the same domain controller.
This issue does not affect forests that have a single domain.

Impact
Group-to-user references in this domain will not be updated when members of a group are renamed or changed within a domain.

Resolution
Transfer the infrastructure master role to a different domain controller that is not a global catalog server or remove the global catalog from this domain controller. If this domain controller is the only global catalog server in the site, add the global catalog to another domain controller in the site.

so what you think @ray @T ?!

foor the Q522 i think that the answer is B or C :s

Hi friend T, you say that you pass the exam with FV + the last 75 The Rock dump but i can question you if you choice the same answer or you choice other answer in stead of Te Rock dump. In this website other user ,RAY, put a .pdf file with others answers.

Thanks in advance,

This moderation of posts is annoying.

I have a newer version of this test that should turn up soon for download.
Scored 900+ with it.

Will be very close to the one in the link below but with a few more corrections. (mostly removal or duplicates and explanations added)

Wait for the exam dated 2013.12.16 from XOR (if they approve it)

Passed the exam with 878 marks.

Thanks for the dump.

Passed with 800+
Valid in My Bangladesh...:-)
Try falcon all + The Rock's last 75
Best Of luck..
Thanks FalconVenomus + The Rock...:-)

I have just updated a new exam based on FV and TheRock. Hopefully will be available here in the next few days.

Has lots of corrections and all the special questions separated and converted to the correct modes.

Sitting this exam soon. I have a few vce for everyone. Just seeing if comments work.

I have uploaded a first version of this to here but it wont be available for a few days.
Basically FV's exam with the last 75 of The Rock's questions and Rays corrections applied as well as a couple of other fixes suggested after his corrections. It also has a few of my own corrections plus a stack of explanations added for the new questions where I could find them.
I have deleted a bunch of duplicate questions and sorted them into groups for the Drag and Drop, common answer questions and multiple choice ones have been grouped into sets of 50 again.
Because of the shuffling all the "Same as questions x/xx" will be wrong, but that was going to lead to a messy exam anyway.

I am using this to study at the moment.
Once I have a complete version I will upload it to this site.

http://www.crocko.com/321B375C1CB846CFAB1E36B26B43D77E/Microsoft.70-640.v2013-12-15.XOR.vce

Go right to the bottom and click on Regular Download once the counter finishes.
A new counter will appear. Wait for it and then it will prompt you with a capcha question. Answer it and it should download a .vce file.
If it tries to download a .exe you have done the wrong thing.

@Rachid From Morocco :assalamo alikom warahmatolahi wabarakatoh, how was the exam?

Passed with 895 in Russia on Dec 2. Had 21 (from 66) questions from the

last 75 from this dump

(503,509,510,516,520,525,531.532,533,536,540,542,548,549 slightly

changed,550,558,566,567,573,574,575), the rest from FV's dump except just

a couple of new questions. Here are my considerations:
494 (dump: B) - suppose D:

http://technet.microsoft.com/en-us/library/cc730970.aspx
504 (dump: C, Ray: D) - suppose D by eliminating other answers, but it

seems to be indirect method
511 (dump: A,D, Ray: A,D) - see below
535 (dump: D, Ray: D) - B, not D, as maybe there's no need to reset the

password and it's enough just to replicate the prp not allowing the

password to be cached:

http://technet.microsoft.com/ru-ru/library/rodc-guidance-for-administerin

g-the-password-replication-policy(v=ws.10).aspx#BKMK_ConfigPRP,

http://technet.microsoft.com/en-us/library/cc742095.aspx
538 (dump: G, Ray: G) - H (not quite sure)

http://technet.microsoft.com/en-us/library/cc757520(v=ws.10).aspx,

http://searchwindowsserver.techtarget.com/feature/AD-permissions - both

about older Windows Server versions, but seem to be still applicable
550 - suppose Add KEY RECOVERY AGENT (instead of enrollment) certificate

template:

http://technet.microsoft.com/ru-ru/library/ee449464(v=ws.10).aspx
561 (dump: D, Ray: D) - doubt whether A may be valid as well
563 (dump: H, Ray: H) - ??? to raise domain functional level one needs to

use AD Domains and Trusts console or Set-ADDomainMode cmdlet, but both

aren't listed
569 (dump: B, Ray: D) - B; autoenrollment option is not available for

version 1 templates, so one needs to use the Automatic certificate

request option http://technet.microsoft.com/en-us/library/cc725838.aspx
574 (dump: C, Ray: C) - see below

This dump is accurate all questions I got where from this dump (FalconVenomous.489q 80%) and (TheRock.575q's last 75 questions 20%), however I strongly advice that you know your stuff cause the answers are not all correct but the questions are entirely correct ;) .

Passed yesterday with 739 - the last 75 questions of the Rock came up a lot, Falcon Venomous also very relevant.
Word of advice make sure you know CA well and DNS zones too!!
Thanks so much to the uploaders!!! :)

Hello guys,I can't download it ,could you please send it by E-mail.
My E-mail address is a021_200122@hotmail.com
Thank you very much!
Today I got score 670 ,fail.
So I really need it

Hello guys,

Could you please convert this pdf http://goo.gl/BfhGMf
to a .vce file and give me a link to download it.

I have some troubles when I try to convert it myself :(

Thank you in advance.

My result 800, i have passed, thanks

I passed with 800!!!!

Several questiosn this dump is valid in Brazil, but is interesting to study other sources also, because there are some questions updated on Official Exam.

hi, ma unable to download the vce file. can some one help me on this

The Rock last 75 and FV along with Crammasteronline were pretty close to exam questions. I had about 8 questions that I studied but never saw on any practice exams. I Passed this cert today. So I would say these are good study aids but you really need to know and understand the AD if you are going to pass this exam.

Hi, Q567 must be 25 Days, Pa$sword, 42 Days.
Please look Chapter 8-Lesson 1 Site 393.
If a user is determined to reuse her password when the password expiration period occurs, she could simply change her password 25 times to work around the password history. To prevent that from happening, the Minimum Password Age policy specifies an amount of time that must pass between password changes. By default, it is one day. Therefore, the determined user would have to change her password once a day for 25 days to reuse a password. Verify the question and give a Feedback please.

30% of the questions came from this dump and the rest are from FalconVenomous.489q

Hi everyone I will pass the exam 70-640 Friday, December 13, 2013 I want to know how many questions I'm going to spend and what the issues are the same people who in this website, please help me

68 Q - 10 new Q - Passed 865

pls guys i would like to know if this dump is still valid cos i will be taking the exams on the 12/12/13. Thanks

hi everybodymmthis is syed here from india..i am going to write this exam 70-640 within a week so please guys help me out to clear this exam.give some tips that what i should study to clear this exam.please

Right, I passed with score of over 800+, but... I did not rely purely on this or any other dumps in here, If you want to pass buy Self Paced Kit from Amazon or other site, set up a lab either at home(you don't need a beast machine) or use one of the lab providers on the net and study the hell out of it. And you will pass. What you need to remember is that even if you pass , Microsoft can always revoke your certification if somehow they find out you don't know basic things needed to pass the exam(there's a lot of stories of ppl loosing their cert on the net)....think about it an lear as much as you can! Good luck all

i am going to write this exam within a week so guys pls suggested me and give me some tips..

Hi, I have checked the question 501 looks like answer is D here please see reference below:

http://support.microsoft.com/kb/889031

When a client computer logs on to a domain that includes Microsoft Windows Server 2003-based domain controllers and Active Directory directory service sites, the client computer is authenticated by a remote domain controller instead of by the local domain controller. Additionally, you may receive an event that is similar to the following in the System event log of the local Windows Server 2003-based domain controller:

Event ID: 5807
Source: NETLOGON
User: N/A
Computer: ComputerName
Description:
During the past number hours there have been number connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. Those clients, therefore, have undefined sites and may connect to any Domain Controller including those that are in far distant locations from the clients. A client's site is determined by the mapping of its subnet to one of the existing sites. To move the above clients to one of the sites, please consider creating subnet object(s) covering the above IP addresses with mapping to one of the existing sites. The names and IP addresses of the clients in question have been logged on this computer in the following log file 'SystemRoot\debug\netlogon.log' and, potentially, in the log file 'SystemRoot\debug\netlogon.bak' created if the former log becomes full. The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text 'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. The maximum size of the log(s) is controlled by the following registry DWORD value'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize'; the default is 20000000 bytes. The current maximum size is 20000000 bytes. To set a different maximum size, create the above registry value and set the desired maximum size in bytes.



If you examine the Netlogon.log file on the Windows Server 2003-based domain controller, you may find text entries that are similar to the following in the Netlogon.log file:
07/22 10:02:32 netbios_Domain_Name: NO_CLIENT_SITE: Client_NameClient_IPaddress
07/22 10:02:32 netbios_Domain_Name: NO_CLIENT_SITE: Client_NameClient_IPaddress
07/22 10:03:07 netbios_Domain_Name: NO_CLIENT_SITE: Client_Name Client_IPaddress

To Alaa Salem from Egypt do you use the same answers from this dump ? pleas help

To Alaa Salem from Egypt do you used the same answers from this dump or not ? pls help

I failed my exam last week with 655, 10 questions was from Rock which i didn't read last time and reading the comments don't know where to get the correct answer for the Rock? any help please appreciate it

Passed with 830 on 11/27/13. Studied the last 75 Q's of this guide and all of the FalconVenomous guide only. For the last 75 Q's make sure to use the corrections given by Ray from Hong Kong. 66 questions total. Only 5 or so were not from either of these guides.

hi ,
i was 70-640 with 817 marks and i attempt 68 questions in that ,...........................

hi,

i was pass 70-640 with 817 marks

511 should be B + C I think

http://technet.microsoft.com/en-us/library/cc794961(v=ws.10).aspx

All references to cross-forest cname's seem to indicate this

In VCE Player uncheck the Randomize Questions and Randomize Answers checkboxes. Then the last 75 out of 575 will be what they're talking about.

this dump is vaild I pass with 726

Last 75 questions edited as ray suggest.
http://goo.gl/BfhGMf

guys what do u mean by the last 75 questions ? because every time u start the dump the questions are randomized they are never in the same order .. please clarify .. thanks

Q511
Pleasy verify, as @ray said he is not sure about answer for this question
So he mentioned that the right answer will be A and D

in my opinion it will be:
C) run dnscmd.exe and specify the enableglobalnamessupport parameter on CONT-DC1 and CONT-DC2

B) Add service location (SRV) records named _globalnames to the _msdcs.contoso.com zone

expalnation:
GlobalNames for multiple Forests.
This is recommended for large organizations with multiple forests and multiple domains to provide single-label name resolution of names configured in the GNZ for all domain-joined client computers in the forests. Because the GNZ is relatively static, it should not cause excess network traffic among the domain controller DNS servers hosting the GNZ.
1. Ensure that all authoritative DNS servers in the forest are domain controller DNS servers running Windows Server 2008 (beta 3 or higher).
2. Ensure that GlobalNames Zone Functionality has been enabled on each DNS server in the forest, as described in the “Enable GlobalNames Zone Functionality” section above.
3. On one domain controller DNS server in the forest, create an AD DS integrated GNZ,
4. Replicate the GNZ to all domain controllers in the forest that are DNS servers. In other words, add the GNZ to the forest-wide DNS application partition.
5. Add a CNAME record for a single-label name pointing to the FQDN of the Web server.
For example:
dnscmd /RecordAdd GlobalNames cweb CNAME cweb.itgroup.corp.contoso.com
6. In each of the other forests, to the forest-wide __msdcs zone which should be replicated to all DNS servers in the forest, add SRV resource records pointing to each remote domain controller DNS server that hosts a local copy of the GNZ:
Name Field: “_globalnames._msdcs.FQDN_of_forest(n)”
Data Field: “[Priority][Weight][Port]FQDN_of_remote_DNS_server_hosting_GNZ”
Priority and weight can be selected as per the standard SRV rules as defined in RFC 2782, or they can be set to the same value (example: priority=10, weight=10) to cause DNS to round-robin between available GNZ servers.

Today i have passed the exam by scoring 817...:) out off 66 40+ from Falcon Venomous and others from last 75 questions The Rock dumps.

Welcome.
Today I passed the exam. the result of almost 800
I have used this dump and FalconVenomous.
As for me, the best pdf to learn it,  is a led2pass with comments available somewhere on this. page
a few new questions, drag and drop regarding DNS and CS

Passed last Friday with 882. Used FV's dump and the last 75 questions here. Most of the questions I had are in the last 75 questions here. I also had 3 new questions.

Hi all,

Having studied Ray's answers, I'd like to mention questions:
511 - I believe the answer to be B,C; ref.: http://technet.microsoft.com/en-us/library/cc731744.aspx (step 5);
574 - maybe just C is correct? ref.: http://technet.microsoft.com/ru-ru/library/dd772690(v=ws.10).aspx (right the events we need)

Also, I can't find anything exact about q.493 (the same in q.501), does anybody know? Due to http://technet.microsoft.com/en-us/library/cc961809.aspx, netsetup.log contains information about the domain join attempts, not about the authentication, doesn't it?

Passed with 882 last Friday using my customized reviewer consisting FV and Ray's correction and some of mine. Most of the exam now will come from the new 75 questions and again some new questions are up though wasn't that hard.

Response to Q480 by Mike
Answer is A: Active Directory module for Windows
Powershell using cmd Set-ADForest -UPNSuffixes
Reference: http://technet.microsoft.com/en-us/library/dd391925(v=ws.10).aspx

Could someone re-upload the VCE with all the corrected answers please?

Hi all,

Having studied Ray's answers, I'd like to mention questions:
511 - I believe the answer to be B,C; ref.: http://technet.microsoft.com/en-us/library/cc731744.aspx (step 5);
574 - maybe just C is correct? ref.: http://technet.microsoft.com/ru-ru/library/dd772690(v=ws.10).aspx (right the events we need)

Also, I can't find anything exact about q.493 (the same in q.501), does anybody know? Due to http://technet.microsoft.com/en-us/library/cc961809.aspx, netsetup.log contains information about the domain join attempts, not about the authentication, doesn't it?

Passed today with 882 using Falconvenomous and the new 75 items shared by Ray & Sha. Though I made my own version combining them and correcting some items. Then again there are some new questions but not that hard.

Hi Folks.
Grab eddited last questions by Ray :)

http://www66.zippyshare.com/v/60158031/file.html

Passed this exam over 900 !!! I studied from FV dump (excellent dump) and the last 75 questions from this dump (with the corrections of Sha, Ray and a bit of research on my own).

68 questions:
- around 10 new questions (DNS, CA, GPO)
- at least 10 questions from this dump
- the rest from FV dump

do i have to study the 1-500 questions in waywonder pdf?

@SekaUg, Q527: Answer is "30days", remain unchanged (as mentioned by me and Ray)
Explanation:
Record time stamp + No-refresh interval for zone + Refresh interval for Zone
http://technet.microsoft.com/en-us/library/cc759204(v=ws.10).aspx

@mike, Q480 yes A is correct.

@djd, plz consult falconvenomous dump and the answers of last 75 questions which have already been shared in comments here.

Ray & Sha you did an excellent job!!!

Whew!!...its been hot today but thanks to God I made it...passed today with 830. My advice is just take about 5 days of from a week n study fv dump very plus de last 75 questions of this dump with rays answers..n I bet u..u are sure to pass

511: Answer B and C

http://technet.microsoft.com/en-us/library/cc731744.aspx

Step 5: Publish the location of the GlobalNames zone in other forests
If you want DNS clients in other forests to use the GlobalNames zone for resolving names, add service location (SRV) resource records to the forest-wide DNS application partition, using the service name _globalnames._msdcs and specifying the FQDN of the DNS server that hosts the GlobalNames zone. For more information, see Add a Resource Record to a Zone and Service Location (SRV) Resource Record Dialog Box.
In addition, you must run the dnscmdServerName/config /enableglobalnamessupport 1 command on every authoritative DNS server in the forests that do not host the GlobalNames zone.

Because the names can be resolved within Fabrikam this would suggest globalnamessupport is already enabled. The SRV and globalnames needs to be added to the other Forest. Cannot find any info on Globalnamesqueryorder.

Question 511: BC

Reference 1: http://technet.microsoft.com/en-us/library/cc794952(v=ws.10).aspx

"When you deploy a GlobalNames zone to provide single-label name resolution by Domain Name Service (DNS) clients in multiple forests, you create the zone in one forest and then add service (SRV) resource records to the remaining forests. This makes it possible for DNS servers in the zones that do not host the GlobalNames zone to locate and query DNS servers that host the GlobalNames zone."

"To add a GlobalNames zone service location (SRV) resource record to a forest using the Windows interface:

(...)In Service, type _globalnames, and then in Protocol, type _msdcs."

Reference 2: http://technet.microsoft.com/de-de/library/cc772069(v=ws.10).aspx

"/globalneamesqueryorder {0|1}
Specifies whether the DNS Server service looks first in the GlobalNames zone or local zones when it resolves names."

"/enableglobalnamessupport {0|1}
Enables or disables support for the GlobalNames zone. The GlobalNames zone supports resolution of single-label DNS names across a forest."

511 - From http://technet.microsoft.com/en-ca/library/cc731744.aspx it looks like the answers should be BE ???

Enable GlobalNames zone support:
The GlobalNames zone is not available to provide name resolution until GlobalNames zone support is explicitly enabled by using the following command on every authoritative DNS server in the forest: dnscmd /config /enableglobalnamessupport 1

Publish the location of the GlobalNames zone in other forests:
If you want DNS clients in other forests to use the GlobalNames zone for resolving names, add service location (SRV) resource records to the forest-wide DNS application partition, using the service name _globalnames._msdcs and specifying the FQDN of the DNS server that hosts the GlobalNames zone.

Question 511

All of the domain controllers are configured to host an Active Directory-integrated zone for their respective domain.

A GlobalNames zone is deployed in the fabrikam.com forest.

You add a canonical (CNAME) record named Server1 to the GlobalNames zone.

You discover that users in the contoso.com forest cannot resolve the name Server1. The users in fabrikam.com can resolve the name Server1.

You need to ensure that the contoso.com users can resolve names in the GlobalNames zone.

What should you do? (Each correct answer presents part of the solution. Choose two.)

A)Run dnscmd.exe and specify the globalnamesqueryorder parameter on CONT-DC1 and CONT-DC2.

B)Add service location (SRV) records named _globalnames to the _msdcs.contoso.com zone.

C)Run dnscmd.exe and specify the enableglobalnamessupport parameter on CONT-DC1 and CONT-DC2.

D)Run dnscmd.exe and specify the globalnamesqueryorder parameter on FABR-DC1 and FABR-DC2.

E)Run dnscmd.exe and specify the enableglobalnamessupport parameter on FABR-DC1 and FABR-DC2.

F)Add service location (SRV) records named _globalnames to the _msdcs.fabrikam.com zone.


Isn't the correct answer is A & C? Since only contoso domain has the issue not Fabrikam. Answer in dump and other suggestions are A&D.

@Ray, very well done for compiling the answers.

@SekaUg, Q527: Correct Answer is 30 days, remain unchanged (as already mentioned by me and Ray)
Explanation: Record time stamp + No-refresh interval for zone + Refresh interval for Zone
http://technet.microsoft.com/en-us/library/cc759204(v=ws.10).aspx

@djd, Answers of last 75 Qs have already been shared by Ray in comments below. For the first 500 questions plz consult falconvenomous dump.

@mike, u r right. Q480: Answer is A (Active Directory module for Windows Powershell)
Explanation:
UPN Suffix can be added in three ways:
1. AD Domains and Trusts
http://technet.microsoft.com/en-us/library/cc756018(v=ws.10).aspx

2. Set-ADForest
http://technet.microsoft.com/de-de/library/dd391925(v=ws.10).aspx

3. Get-ADUser
http://blogs.technet.com/b/heyscriptingguy/archive/2013/08/13/add-user-principal-names-in-active-directory-via-powershell.aspx

Q511
Pleasy verify, as @ray said he is not sure about answer for this question and mentioned that the right answer will be A and D.
In my opinion it will be:
C) run dnscmd.exe and specify the enableglobalnamessupport parameter on CONT-DC1 and CONT-DC2

B) Add service location (SRV) records named _globalnames to the _msdcs.contoso.com zone

expalnation:
GlobalNames for multiple Forests.
This is recommended for large organizations with multiple forests and multiple domains to provide single-label name resolution of names configured in the GNZ for all domain-joined client computers in the forests. Because the GNZ is relatively static, it should not cause excess network traffic among the domain controller DNS servers hosting the GNZ.
1. Ensure that all authoritative DNS servers in the forest are domain controller DNS servers running Windows Server 2008 (beta 3 or higher).
2. Ensure that GlobalNames Zone Functionality has been enabled on each DNS server in the forest, as described in the “Enable GlobalNames Zone Functionality” section above.
3. On one domain controller DNS server in the forest, create an AD DS integrated GNZ,
4. Replicate the GNZ to all domain controllers in the forest that are DNS servers. In other words, add the GNZ to the forest-wide DNS application partition.
5. Add a CNAME record for a single-label name pointing to the FQDN of the Web server.
For example:
dnscmd /RecordAdd GlobalNames cweb CNAME cweb.itgroup.corp.contoso.com
6. In each of the other forests, to the forest-wide __msdcs zone which should be replicated to all DNS servers in the forest, add SRV resource records pointing to each remote domain controller DNS server that hosts a local copy of the GNZ:
Name Field: “_globalnames._msdcs.FQDN_of_forest(n)”
Data Field: “[Priority][Weight][Port]FQDN_of_remote_DNS_server_hosting_GNZ”
Priority and weight can be selected as per the standard SRV rules as defined in RFC 2782, or they can be set to the same value (example: priority=10, weight=10) to cause DNS to round-robin between available GNZ servers.

For example:
Name Field: “_globalnames._msdcs.acct.corp.contoso.com”
Data Field: “10 10 53 LH-SRV01.eng.corp.contoso.com”

Q519: Answer is A,
Explanation: Before we can use the Directory Service Changes audit policy subcategory, we have to enable it first. We can do that by using auditpol.exe.
Reference: http://technet.microsoft.com/en-us/library/cc731607.aspx

You can use the command-line tool Auditpol.exe to view or set audit policy subcategories. There is no
Windows interface tool available in Windows Server 2008 to view or set audit policy subcategories.
Further information: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx

Q527: Answer is 20days, remain unchanged
Explanation:
No Refresh Interval- Registered Host records will not be refreshed after 10days i.e no scavenging
Refresh Interval: Refreshing Host records will be done after 20days i.e scavenging process starts to run.

Hi, Could you please verify the question 538, I think the right option here is H, we need to use ADUC to assign permissions to the Computer_Location group members.

to sha and to waynewonder. please email me your pdf file with the correct answers for the new questions. Thanks.

If anybody have the latest question please let combine all the dumps in one with the right answers. Thank you in advance.

(I hope the admin of this website will allow me to post this message)

I took the exam today and failed. What I studied was FV, and the last 75 questions, i did not study rock/waywonder (1-500).

I mastered all the exam questions and answers but still i failed.
I notice that most questions came from this dump.

FV = 30%, Rock&waywonder = 40%, last 75 = 30%

Im going to retake the exam this week and this time I'll study rock/waywonder.

Ray- thank you.
I checked Q500-511 and all answers are correct, even when you type UNSURE - they are correct.

Ray - i checked first 11 question (500-511) any you have right with answers. Where you have UNSURE- this is good answer anyway.

Hi all and thanks for your great contributes.
Is it possible that Q511 correct answers are AC and not AD? In Fabrikam they resolve the name without problem so I think we have to enable globalnamesupport in Contoso.
What do you think?

@ Mike

It's B

http://support.microsoft.com/kb/243629

Q511
Pleasy verify, as @ray said he is not sure about answer for this question
So he mentioned that the right answer will be A and D

in my opinion it will be:
C) run dnscmd.exe and specify the enableglobalnamessupport parameter on CONT-DC1 and CONT-DC2

B) Add service location (SRV) records named _globalnames to the _msdcs.contoso.com zone

expalnation:
GlobalNames for multiple Forests.
This is recommended for large organizations with multiple forests and multiple domains to provide single-label name resolution of names configured in the GNZ for all domain-joined client computers in the forests. Because the GNZ is relatively static, it should not cause excess network traffic among the domain controller DNS servers hosting the GNZ.
1. Ensure that all authoritative DNS servers in the forest are domain controller DNS servers running Windows Server 2008 (beta 3 or higher).
2. Ensure that GlobalNames Zone Functionality has been enabled on each DNS server in the forest, as described in the “Enable GlobalNames Zone Functionality” section above.
3. On one domain controller DNS server in the forest, create an AD DS integrated GNZ,
4. Replicate the GNZ to all domain controllers in the forest that are DNS servers. In other words, add the GNZ to the forest-wide DNS application partition.
5. Add a CNAME record for a single-label name pointing to the FQDN of the Web server.
For example:
dnscmd /RecordAdd GlobalNames cweb CNAME cweb.itgroup.corp.contoso.com
6. In each of the other forests, to the forest-wide __msdcs zone which should be replicated to all DNS servers in the forest, add SRV resource records pointing to each remote domain controller DNS server that hosts a local copy of the GNZ:
Name Field: “_globalnames._msdcs.FQDN_of_forest(n)”
Data Field: “[Priority][Weight][Port]FQDN_of_remote_DNS_server_hosting_GNZ”
Priority and weight can be selected as per the standard SRV rules as defined in RFC 2782, or they can be set to the same value (example: priority=10, weight=10) to cause DNS to round-robin between available GNZ servers.

For example:
Name Field: “_globalnames._msdcs.acct.corp.contoso.com”
Data Field: “10 10 53 LH-SRV01.eng.corp.contoso.com”

What do you think about it guys?

Passed today with a 726 and there were only 1 -2 new questions. Majority of the questions came from the 75 question talked about in this forum. The other questions came from the multiple choice Q & A (A - H) options.

Thanks FV and Rock, passed in india....

@ mike
As there is no Active Directory Domains and Trusts answer i think You're right with an A. PowerShell does the job.

the last 100 quistion(you must confirm the answer again),and the falconvenomous ,read hard,you will pass.my score 830,ysterday,Taiwan

Hi Guys, can you also share that PDF to me as what DJD is asking.

I'm going to take the exam this coming monday here in Philippines. 1 day left

Passed today with 856! Is my 2nd attempt, 1st 68 Q, 2nd 66 Q.
~80% similarity, definitely enough for you to pass the test!

Advice, study FV + the 75Q I compiled with help from others.
Study the questions thoroughly until you understand the answers.

Thank you guys for all the dumps and sharing, appreciate it very much!

Passed the exam today with 869 in Portugal! 68 questions, 13 completely new (I've never seen in all my study)!! I study the pdf with 575 questions, the exam Microsoft.Certkey.70-640.v2013-10-28.by.TheRock.575q.vce and Microsoft.Pass4Sure.70-640.v2013-05-29.by.FalconVenomous.489q.vce and tested every question in the server! Make the same!
Thanks everyone!!

Q511
Pleasy verify, as @ray said he is not sure about answer for this question
So he mentioned that the right answer will be A and D

but in my opinion it will be:
C) run dnscmd.exe and specify the enableglobalnamessupport parameter on CONT-DC1 and CONT-DC2

B) Add service location (SRV) records named _globalnames to the _msdcs.contoso.com zone

expalnation:
GlobalNames for multiple Forests.
This is recommended for large organizations with multiple forests and multiple domains to provide single-label name resolution of names configured in the GNZ for all domain-joined client computers in the forests. Because the GNZ is relatively static, it should not cause excess network traffic among the domain controller DNS servers hosting the GNZ.
1. Ensure that all authoritative DNS servers in the forest are domain controller DNS servers running Windows Server 2008 (beta 3 or higher).
2. Ensure that GlobalNames Zone Functionality has been enabled on each DNS server in the forest, as described in the “Enable GlobalNames Zone Functionality” section above.
3. On one domain controller DNS server in the forest, create an AD DS integrated GNZ,
4. Replicate the GNZ to all domain controllers in the forest that are DNS servers. In other words, add the GNZ to the forest-wide DNS application partition.
5. Add a CNAME record for a single-label name pointing to the FQDN of the Web server.

For example:
dnscmd /RecordAdd GlobalNames cweb CNAME cweb.itgroup.corp.contoso.com
6. In each of the other forests, to the forest-wide __msdcs zone which should be replicated to all DNS servers in the forest, add SRV resource records pointing to each remote domain controller DNS server that hosts a local copy of the GNZ:
Name Field: “_globalnames._msdcs.FQDN_of_forest(n)”
Data Field: “[Priority][Weight][Port]FQDN_of_remote_DNS_server_hosting_GNZ”
Priority and weight can be selected as per the standard SRV rules as defined in RFC 2782, or they can be set to the same value (example: priority=10, weight=10) to cause DNS to round-robin between available GNZ servers.

For example:
Name Field: “_globalnames._msdcs.acct.corp.contoso.com”
Data Field: “10 10 53 LH-SRV01.eng.corp.contoso.com”

What do you think about it guys?
cheers

Hi all, passed the test today with score 856! This is a 2nd attempt for me, 1st one had 68 Q, 2nd one had 66 Q. Q similarity for both are around 80%~85%.

As an advice, study FV's dump + the 75 Questions with the answers that I compiled with help from great ppl here!

There's no quick way to it, do the questions over and over again until you understand them.

All the best for those going to take the exam and congrats to those that passed! Phew!

A big applause for the great ppl that provided the dumps, thank you very much!

to sha and to waynewonder. please email me your pdf file with the correct answers for the new questions. Thanks.

Passed with a 765! KNOW FV's dump through and through + this one with Ray and Sha's revisions in the comments. Ray, you did an excellent job going through the last 75 questions! Whoo!

Q480 please verify
A corporate network contains a windows Server 2008R2 AD forest.
You need to add a user principal name (UPN) suffix to the forest.
which tool should you use?
a) Active Directory module for Windows Powershell
b) Active Directory Administrative Center console
c) Active Directory Sites and Services console
d) Active Directory Users and Computers console
in dump answer is B

but answer seems to be A!
http://technet.microsoft.com/en-us/library/dd391925.aspx

what do you think guys
cheers

@Ray are all your answers right from the 1 in the dump?

Those * are wrong in dump, the list have correct answers (Some unsure)

Hi Guys, I've compiled the answers from 500 - 575 in this dump. Those with * are wrong and some unsure I marked unsure. Same as dump are picture answers. Kindly provide corrections if you find any mistakes, let's tackle this together!

500* - B
501* - B (Unsure)
502* - C
503* - No answer - Suggest WMI Filter
504* - D
505 - A
506* - D
507 - Same as dump
508 - C
509 - Same as dump
510* - C
511* - AD (Unsure)
512* - A
513 - B
514* - B
515 - Same as dump
516 - B
517 - C
518* - A
519* - B
520* - D
521 - B
522 - D
523 - CD
524 - A
525 - Same as dump
526 - C
527 - 30, remains unchanged
528 - Same as dump
529 - Same as dump
530 - Same as dump
531 - A
532 - BD
533* - B
534 - Same as dump
535 - D
536 - C
537 - E
538 - G
539 - G
540 - AE
541 - Same as dump
542 - D
543 - D
544* - B
545 - B
546 - A
547 - AC
548 - A
549 - Same as dump
550 - Same as dump
551 - A
552 - Same as dump
553 - Same as dump
554 - D
555 - Same as dump
556 - Same as dump
557 - B
558 - A
559 - D
560 - B
561 - D
562 - H
563 - H
564 - H
565 - B
566 - B
567 - 24 days, Pa$w0rd, 42 days
568 - B
569* - D (Unsure)
570 - A
571 - D
572 - B
573 - AB
574 - C
575 - D

Q549. DC1 is holding stub zone of fabrikam.com zone.DC1 can't be authoritative even if the query type was ns query.I verified this in my lab with
a stub zone and ns query by using nslookup.but still not pretty sure if i'm right
Can anyone give me clear explanation plz?

Your network contains an Active Directory domain. The domain contains five sites. One of the sites contains a read-only domain controller (RODC) named RODC1.

You need to identify which user accounts can have their password cached on RODC1.

Which tool should you use?

Get-ADFineGrainedPasswordPolicy (selected but wrong I believe)
Dcdiag
Get-ADDomamControllerPasswordReplicationPolicy (should be this one)
Get-ADAccountResultantPasswordReplicationPolicy

http://technet.microsoft.com/en-us/library/ee617207.aspx

Get-ADDomamControllerPasswordReplicationPolicy
"Gets the members of the allowed list or denied list of a read-only domain controller's password replication policy."

Passed today with 791. About 10 new questions. I studied FV, the last 75 of this dump and the Microsoft.passguide.70-640.v2013-07-18.by.GillBeast.490q pdf.
There are a few questions of this dump thar are wrong, search the answers in the pdf.
Thanks very much for the help.

@Mohamed, the explanations given in FV dump can solve many questions which u mentioned. Yes some questions are new but few questions are same as FV dump with a Little Variation. So help yourself with CTL+F in pdf, i am sure u can fine 30-40% answers and the rest can u discuss here :)

Passed Yesterday with over 800!

Falcon Venomous -AMAZING- study each question until you really understand it. Watch all videos from ITfree training on 70-640. Google all of the image screen shots of all configuration screens mentioned so you know what things actually look like. Study every question until you know WHY it is true because many of the questions are slightly different variations of the ones in these dumps - but if you understand the questions here you can get them right. I'd say at this point 50% of the questions where from Falcon. About 15% from TheRock dump/ & Wayfinder PDF mentioned in other threads here and the rest were close variations I had not seen before. As mentioned elsewhere the questions in this dump are often wrong and the PDF same issue. It will take several DAY's tracking down answers for them. Study the crap out of certificate services and Utilities.

Yeah the last 100 questions cannot be relied upon. I think I have pretty much worked out the correct answers though.
Well apart from Q493, 494, 501. Anyone have any clues?

@Sha I already studies FV dump ,, but the last 75 questions in this Dump most of them are new and they are not in the FV dump but actually many wrong answers here ,, so i just need to make sure what are the right answers for these questions becuase they are not in the FV dump

@Mohamed, below is the pdf of FV dump (FV and GB is the same). Find the correct answers and the ones which u can't find u can discuss them here.

https://www.dropbox.com/s/zdjveqy93vkug1l/Microsoft.passguide.70-640.v2013-07-18.by.GillBeast.490q.pdf

Are all the questions from the last 75 wrong? or just a few?

please would any one tell me the right answers for these questions.
501,505,510,516,518,521,524,537,538,539,540,542,544,545,546,548,551,554,562,563,564,569,570,574
I am sorry i know those are too many questions,,
Thanks in advance

Used this dump and FV's for a sure pass.
Thank you both.

Passed the exam on Tuesday. Exam is split between Falconvenomous and Last 75 questions in this TheRock. Know FalconVenomous very well, and try to find out the answers to the last 75 questions yourself. I am 100% certain about 15 questions came out of the last 75 questions so Google them and stop complaining

Hello all,

Have taken the test 2weeks ago and got the worst grade ever, b´cause any of the latest files were up to date, as mentioned earlier the last ones are on the current test I´ve got here in Brazil, going to second shot soon.cheers

WOW! So many incorrect answers in the last 100 questions of this dump that it's ridiculous. DO NOT rely on this dump to pass the exam or you will fail!

Hi all,
First I want to thank the guys that was helping here, cause I just passed the test with the score of 778.
I got 68 Q. most of them was from this dump, there was at least 6 new ones and maybe 4 Q. from other dumps.
All the answers was mixed and not like in the dump so don't count on remembering the order of the answers.
And the wrong answers is not the same like in the dump, so try remaindering the exact answer.

G' Luke to you all.

@ Casey

Q503: Has the wrong set of answers - WMI Filters is the answer to the question, it's just not in that list of answers (I had that question in my exam and it was there)

Q506: Best I could find was answer D - Run dnscmd.exe and specify the /enlistdirectorypartition parameter. The explanation I found was that its Read Only, so the partition must already exist, therefore you need to run /enlistdirectorypartition.

Hello everyone,
please, can you confirm the answers to these questions?

Q503 ????
Q506
Q512 Why not Repadmin?
Q544
Q568

Thank you for your help

@Mohamed, u need to consult falconvenomous dump for Q46 + all the questions u r consulting are already there in falconvenomous with correct answers/References. (Tried to copy paste complete question but i think the comment words Limit is short, so pasting only the answers and references)

Question 2
You need to ensure that all domain controllers can resolve names from the dev.contoso.com zone .
What should you do?
C. On one domain controller, create a conditional forwarder. Configure the conditional forwarder to replicate to all DNS servers in the forest.

Correct Answer: C

Explanation/Reference:
http://technet.microsoft.com/en-us/library/cc730756.aspx

Question 34
You need to restore the previous version of the script in the SYSVOL folder . The solution must minimize the amount of time required to restore the script .
What should you do first?
D. Attach the VHD file created by Windows Server Backup.

Correct Answer: D

Explanation/Reference:
http://technet.microsoft.com/en-us/magazine/2008.05.adbackup.aspx

Question 19
You need to determine which domain controller holds the Inter-Site Topology Generator role for the Toronto site .
What should you do ?
A. Use the Active Directory Sites and Services console to view the NTDS Site Settings for the Toronto site.

Correct Answer: A

Explanation/Reference :
http://technet.microsoft.com/en-us/library/cc794776.aspx

Guys yesterday i had given exam but i got failed all the questions are came from this dump but some questions doesn't have the exact options which are in the dumbs. suggest me i need to give this exam urgently( which is not shared) so guys help to get out this exam share the correct dumbs.

Guys, be wary of this dump. As I understand it, the last 75 ~ 100 questions of this dump may be relevant to the current version of the exam. However, there are MANY incorrect answers within those questions, with no explanations. Please be careful when using this material to study for the test. If you actually study, lab, and learn the material, you should be ok. If you simply memorize these answers, you're going to fail. Falconvenomous' dump still seems to be the most reliable as far as accuracy of answers go. That would be a good one to use to help you study. And again, actually try to LEARN the material.

https://www.dropbox.com/s/76sl639s35mio8z/Microsoft-70-640%20%281%29.pdf

Sorry, yes to A

@mohamed: I would say yes as well. If has two domains, so you need to replicate within the whole forest, not just the domain that the controller is in.

@Mohammed.Im sure the answer to your question is the option A. Because in a DNS zone you can either create a stub zone or conditional forwarder but not both and it should replicate to all DNS servers in the forest

QUESTION 46

A corporate network includes an Active Directory Domain Services (AD DS) forest that contains two
domains. All servers run Windows Server 2008 R2. All domain controllers are configured as DNS servers.
A standard primary zone for dev.contoso.com is stored on a member server.
You need to ensure that all domain controllers can resolve names from the dev.contoso.com zone.

What should you do?
A. On one domain controller, create a stub zone. Configure the stub zone to replicate to all DNS servers in
the forest.

B. On one domain controller, create a stub zone. Configure the stub zone to replicate to all DNS servers inthe domain
.
C. On one domain controller, create a conditional forwarder. Configure the conditional forwarder toreplicate to all DNS servers in the domain.

D. On the member server, create a secondary zone.


can anyone provide the right answer to this Q

Same here Sanchit. Passed with 869 using this dump for the simulation questions. The last 75 questions from this dump are extremely relevant but use the FV dump also so the answers are clear to you. If you know both of these cold you will easily pass.

Firstly, Thanks a lot Falconvenomous, Waywonder for the dumps provided by both of you. Also special thanks to Jay, Sha, Hagai, Mohamed, Phil and all others for all the suggestions and corrections you provided.
Had a great exam. Cleared 70-640 with 843 marks. As suggested used the full Falconvenomous dump and Qs no.450-575 from the Waywonder pdf. along with the corrections provided by everyone. And just a couple of new Qs.
Together these dumps are 90% plus valid.
Again thanks a lot all of you :)

What is the correct answer for Q 561?

Thanks @Danye I think I will go with you and choose D like you said we already remove user1 from the group.

@Hagai Q35 it`s Really confusing but for me i would go for D , Cuz you already You remove User1 from the Allowed RODC Password Replication Group , you don`t have to Add User1 to the Denied RODC Password Replication Group, but i`m not sure .
----------------------------------------------
And Can Anyone Check Plz Questions num 472 - 511 .

Peace ^^

In regard to the answer from @SHA correction in Q 567 the password should be Pa$w0rd and not P1@s2d because the minimum length is 7 caracters.

Can anyone tell me if the answer to Q 535 is A or is it D like in the dump?

Take a look at Q519 and Q544, I am almost positive the answer for both these questions is "Enable the Audit directory service access in the default domain policy group policy object". It is just a repeat but I base my answer of this link http://technet.microsoft.com/en-us/library/cc731607(v=ws.10).aspx
I may be wrong and if I am please say so with an explanation.

mohamed I believe the answer is C: http://support.microsoft.com/kb/224599

Big thanks to mohamed and sha - much appreciated.

@SHIA QUESTION 518 The Right Answer is ( A) .( Prestage each computer account in the Active Directory domain. )
______________________________________
And Can Someone Helping Me In This One . ^^

A corporate network includes a single Active Directory Domain Services (AD D5) domain and two AD DS
sites. The AD DS sites are named Toronto and Montreal. Each site has multiple domain controllers.
You need to determine which domain controller holds the Inter-Site Topology Generator role for the Toronto
site.
What should you do?

A. Use the Ntdsutil tool with the roles parameter.
B. Use the Ntdsutil tool with the local roles parameter.
C. Use the LDP tool to view the NTDS Site Settings for the Toronto site.
D. Use the LDP tool to view the properties of each domain controller in the Toronto site

I passed using a combination of this dump and the falconvenomous dump. The falconvenomous is better. However, as many have stated, the questions at the end of this dump are the newer questions. I also recommend using falconvenomous and then using this dump for the last 75-100 questions. (others have already stated this)

One oddity, this dump gives you different questions on the iPad app than it does on the PC app (at least for me). Beware! You need to use the PC app to see most of the new questions.

Guys you are really helping. this is perfect now i have faith that i will make it. thanks alot

Hi James,

490 - A, (This question is repeated 5 times im dump and the right answers are as follows depending on the scenario "AD Users and Computers, ADSI, AD Sites and Services")
500 - B, (This question is repeated 5 times im dump and the right answers are as follows depending on the scenario "AD Domains and Trusts, Set-ADForest")
511 - As mentioned in dump
512 - A, This question is repeated 5 times im dump and the right answers are as follows depending on the scenario "Ntdsutil, AD Sites and Services"
518 - As mentioned in dump
520 - D
522 - As mentioned in dump
525 - As mentioned in dump
526 - C
527 - 30, remains unchanged
528 - As mentioned in dump
530 - As mentioned in dump
533 - B
534 - As mentioned in dump
538 - As mentioned in dump
539 - No idea
540 - As mentioned in dump
543 - As mentioned in dump
547 - No idea
549 - As mentioned in dump
550 - As mentioned in dump
551 - As mentioned in dump
553 - As mentioned in dump
559 - As mentioned in dump
561 - As mentioned in dump
567 - 24 days, P1@s2d, 42 days
568 - B, (This question is repeated 5 times im dump and the right answer is "directory services changes auditing")
571 - As mentioned in dump
574 - As mentioned in dump
575 - As mentioned in dump

QUESTION 6 (D) / QUESTION 10 ( C ) / QUESTION 18 ( A ) / QUESTION 20 ( D ) / QUESTION 33 ( B ) / QUESTION 44 ( B ) / QUESTION 46 ( C ) /

This answer Supposed to be the right One from exam -F- . And if anyone can correct the rest of the Exam , I would be thankful :)

@Hagi . R u Sure Cuz i think , it should be ( Restore the system state to its original location.) , And Thanxx u

Have been working through exam F trying to work out the correct answers, was wondering if anyone could double check a number of answers : 511, 518, 520, 522, 525, 526, 527, 528, 530, 534, 538, 539, 540, 543, 547, 549, 550, 551, 553, 559, 561, 571, 574, 575

Q 514 is B
Q 535 is D
Q 504 is D

Q 567 a previously used password can be reused after 24 days.
The minimum password age is one day and password history is 24
All the rest of the answer is right.

Hi Mohamed,
The answer is B.
Attachet the VHD file and you can copy from there the file that you need.

Q33 is A

Q502 is c

Your network contains an Active Directory domain. The domain contains two domain controllers named DC1
and DC2.
You perform a full backup of the domain controllers every night by using Windows Server Backup.
You update a script in the 5YSVOL folder. The new script fails to run properly.
You need to restore the previous version of the script in the SYSVOL folder. The solution must minimize the
amount of time required to restore the script.
What should you do first?

A. Run the Restore-ADObject cmdlet.
B. Attach the VHD file created by Windows Server Backup.
C. Run the NTDSUtil.exe command-line tool.
D. Restore the system state to its original location.

Can Someone Give me the Right Answer ?!!

i passed the exam 830 marks, the questions are 90% valid, but don't rely on fully for answers on the dump.

so what were saying is study falconvenomous dump. then study the last 75 questions of this one too but the answers to this one are more than likely wrong?

thanks sha for the nice advice. very soon i wil be sitting for this exam. i will tell you the outcome.

Hi Folks, please advise if this VCE is updated as it conflicts between Venumous created VCE which is so confusing thanks

Passed the exam yesterday. 95% Valid in Germany.

A tip for you all, use the dump of falconvenomous (complete) + this one (last 75 questions).

falconvenomous's dump is very good cz the answers are correct (few questions are outdated but for sake of knowledge its good).

This dump is same as falconvenomous only 75 questions are new (as Jay said "This is same as provided by waynewonder's PDF") but don't rely on answers bcz many of them are incorrect, still u can have idea abt the new questions (try to find correct answers of last 75 Qs yourself, it will also help you understand AD).

Cheers !

Ok ymm. look, i will be writting the exams before 7 november so i will not stop asking you untill i pass. how many simulations came in your exams?

Exam A, Q474 wrong Answer. the wrong answer is A but it has to be B.let us talk on this one.