Pass Your Microsoft 70-414 Exam Easy!

Valid

Hello,
Passed yesterday 7xx dump is valid, all questions from this dump, but 20% 30% wrong answer. Good luck

can any one who failed or passed with whatever degree write down his performance parentage by exam section so we might be able to catch what questions of this dump we have to pay attention ?

Passed today 800
All questions had been seen before but as you have read about 20%-30% of the answers are incorrect.
I used Lorraine, Gladys, Constance and of course Maureen.
Good luck to all!

Barely passed 7xx after preparing from Glandy, Moureen, and Lourrain. Be careful guys 1-2 wrong answers other then these dumps would put you in the hot waters. Take a risk with these dumps or wait for some better and valid ones.

passed with 776

just finished my exam, dump is valid..lots n lots wrong answers..barely passed..

sorry guys, too many different answers. everyone have their own. i guess have to do my own R&D. thanks for posting though.

Please somebody can confirm us if this dump still valid? Thxs.

E10 - C is correct because your new A record will point to NLB cluster address
===
E27 - Only B & C ? Is an AIS really needed here ? Windows Intune & WSUS should be able to provide a list of updates.
http://www.microsoft.com/sam/en/us/intune.aspx
===
E33 - A & E
"If you enable the above Audit Policy settings but don't also create SACLs, you won't get any audit events from those Audit Policies.
We need to create one or more System Access Control List entries (SACLs) for what we want to audit."
http://blogs.technet.com/b/askpfeplat/archive/2012/04/22/who-moved-the-ad-cheese.aspx
===
E40 - A is correct because AD FS requires 3rd part SSL certificate
===
E68 - Why we installing BitLocker on the DC instead of Server1 ? The installation is required so you can have access to latest EFS template so it would make sense to install it on Server1. Is there a requirement to have it on DC ?
===
E76 - Not sure about 'Quick Connect' since technet article below states if you use MPIO you cannot use 'Quick Connect'.
"For advanced connections to iSCSI target devices, such as those that require the following features, it is not possible to connect to the devices by using Quick Connect:
- MPIO"
http://technet.microsoft.com/en-us/library/ee338480(v=ws.10).aspx

E10 Should be B not C to my surprise

http://technet.microsoft.com/en-us/library/gg398251.aspx

Thank you all for all corrections..can someone please double check E40, E48 and E33 and A3. Thanks again

This is out of the article I found

Passed 26.05 7XX, no new questions

@Moustafa
Are you sure about your answers?

@Ukr

Looks like you are correct. The real answer seems to be D and here is why.

Redirected I/O Uses SMB 3.0

In W2008 R2, redirected I/O traffic passed over the cluster network with the lowest metric. That changed in WS2012. WS2012 uses SMB 3.0 for redirected I/O. This gives redirected I/O the best possible performance thanks to SMB Direct (if RDMA-capable NICs are used in the cluster) and, importantly, via SMB Multichannel.

SMB Multichannel is going potentially to use any NIC it can find between the non-CSV owners and the CSV owner, flooding the network with unmanaged redirected I/O traffic. You can control which NICs are used by SMB Multichannel by using the New-SMBMultichannelContraints PowerShell cmdlet. Typically (though this depends on your network design) you will limit SMB Multichannel to the cluster’s private networks.

E52: what's the right answer.

Answer C("Set the metric of ClusterNetwork4 to 30,000 and disable SMB Multichannel.") wasn't even there, the other three answers were there.

@Mustafa 3 way mirror needs 5 disk not three. (3+n) + 2... http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx

@Mortal
i know that the correct answer for E9 is Availability but the correct answer in the real exam is Anti Affinity command (equivalent to availability sets the previous right answer)
sorry for the misunderstanding

Your network contains two servers named Server1 and Server2 that rnu Windows Server 2012. Server1 and Server2 have the Hyper-V role installed and are members of a failover cluster.

Each virtual machine will store up to 4TB of data on a single disk.

Final option should be: Configure each virtual machine to use a VHDX disk. VHD disks only support disks up to 2TB in size.

@Bryan. Can you please highlight the wrong answers in this dump.

Sorry Moustafa E9 the answer D Availability settings is correct

http://technet.microsoft.com/en-us/library/jj628163.aspx

Passed today 9xx
E40 came was multiple choices as expected (note my answer in the comments)

Important E9 came with different choices and the answer is Anti Affinity command (equivalent to availability sets the previous right answer)

bryan i noted that before the exam and you are right the right answer for A3 is DFS

Important please study Microsoft.Exactquestions.70-414.v2014-05-03.by.Constance.70q.vce because you will see in the exam at least 3 questions from Constance Dump

Hi mero
E38 became
A-On Server1, install the Network Device Enrollment Service role Service.

B-Configure Server1 as a standalone root CA.

C-Configure Server2 as an Enterprise CA

D-On Serverl, run the Add-CertificateEnrollmentPolicyServer cmdlet.

and the correct answer is C
Explanation:
In a typical CA infrastructure the Stand-alone CAs are primarily intended to be used as Trusted Offline Root CAs in a CA hierarchy or when extranets and the Internet are involved. In a stand-alone CA Certificate templates are not used. An enterprise CA uses certificate types, which are based on a certificate template.

@Moustafa

sorry buddy but in the event of a WAN link failure Branchcache WILL not work. this is where DFS-R comes in

http://serverfault.com/questions/554558/windows-server-2012-branchcache-vs-dfs-r

Sorry E65 the answer for three way mirror is Five disks

E5 i was wrong the correct answer is (D) host group
http://technet.microsoft.com
/en-us/library/gg610645.aspx

E4 i was wrong the correct answer is (A) The settings of the virtual switch
http://es.calameo.com/read/00194520942e7d03de414

E9 the correct answer is A no doubt

passed 8xx
q7 chioce \\Clus1\Share5B
q9 answer not found in exam new 3 choices only selection A were fonud
q38 answer not found in exam new choices one of new choises
on server2 install enterprise subordinate ca

E4 i think the correct answer is (B) The settings of the virtual network adapter

E5 the correct answer is (C) Cloud
http://social.technet.microsoft.com/wiki/contents/articles/2729.how-to-create-a-cloud-in-vmm- 2012-en-us.aspx

A3 the correct answer is (B) BranchCache in distributed cache mode
http://technet.microsoft.com/en-us/library/jj127252.aspx

E33 should be A and B

E 48 ofcource A and D

E40 i think the quetion should be multiple choices because A and E are both correct

E65 the answer for three way mirror is definitely three not five (the correlation is 1:3 which means three NOT five)

D5 the correct answer should be (A) Configure all of the virtual machines to use dynamic memory. Implement Distributed File System (DFS) Replication and store the virtual machine files in a replicated folder.

Can someone highlight the wrong answers for the poor people. Thanks

Dump is valid in the US. Passed with a 780

This dump is valid, questions are taken directly from the exam as I took it.

Valid 8xxx

Valid?

to dolce, i agree with what you said, which book did you read? there is no book for 70-414 that i can find.. it won't be released until July

Hello guys,

Is any user of this site who really touch a book ?
All of you are complaining about tests quality and update.
I use these sheety old test and, fortunatelly, I go the MCSE acreditation.

My advice: touch the books, not only one; it is not enough.

Good luck

valid?

Valid or no?