Pass Your Microsoft 70-669 Exam Easy!

can someone cfraily?78. A hacker is interested in seeing traffic from all switch ports on the switch that he is connected to,including the ports belonging to other VLANs. What type of attack is he likely to implement?A. MAC address floodingB. ARP attackC. spoofing attackD. DHCP attackE. VLAN hoppingSelected answer is A. But I thought that when the cam table did not have an entry for a given mac address it flood it out all ports but only the ports for that particular vlan. So if packet is for vlan 12, and arp-resolved destination mac is not in cam table, it flood out all ports assigned to vlan 12. Does it flood to all ports no matter vlan? That would seem strange .

Wendy,

The answer IS A: Install .NET Framework 3.5. notice on the URL you posted in the configuration properties for Windows XP

(2) Even if RDC 6.1 or above is used, the user must install a supported version of .NET Framework separately. Microsoft .NET Framework 3.5 (which includes .NET Framework 3.0 SP1) can be downloaded from the Microsoft Download Center (http://go.microsoft.com/fwlink/?LinkId=109422 ).
*In Windows Vista SP2 with RDC 7.0 and KB971644 installed, .NET Framework is not required

As mentioned in the exam question all client computers run Windows XP SP3

Passed, exam still valid, order of answers is different.

Question 43: .You need to ensure users can print using Easy Print while connected to the RD Session Host server. What do you need to do on the client computers?

A:Install .NET Framework 3.5.(exam answer)
B:Enable Network Level Authentication (NLA) (my answer)
C:Enable a Windows Firewall Inbound Rule for FilePrinter Sharing
D:Enable a Windows Firewall Outbound Rule for FilePrinter Sharing

C and D are definitely not correct. My arguments for B:

From: http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx

"In addition, we're happy to announce that with Win7 / WS08 R2, Easy Print no longer has a dependency on .NET Framework -- a common request from customers that didn't want to install .NET on all clients from which they wanted to print. "

"Ensure that the spooler service is running on both the RDP Client & Server.
Windows Server 2008 added the ability for an Admin to configure spooler security and Windows 7/Windows Server 2008 R2 adds the UI for this. Therefore, it would be possible to alter the RDP server's spooler security descriptor which might prevent RDP client printers from being redirected on the session. The spooler security descriptor must contain the "AU" (Authenticated User) ACL (Access Control List) which allows any authenticated user to open the spooler service for reading operations. Therefore, if that ACL is missing from the spooler security descriptor, it must be added like the example below."

The old documentation (pre Server 2008 R2) says you need Remote Desktop Connection (RDC) 6.1 and at least Microsoft .NET Framework 3.0 Service Pack 1 (SP1). Answer (A) isn't a very good alternative to the old requirement.

http://technet.microsoft.com/en-us/library/cc753853%28WS.10%29.aspx

http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/7868bd26-a215-41a1-95d8-fd697d5c3494/

Thoughts?

100% valid in India, All questions are from the dump but few are having wrong answers. Cleared the exam today with 918 marks. Went thru this dump and the dump from JJ. Good Luck

Valid in Costa Rica 836/1000

quastions listed by emir are answered correctly in vce by klisi.

EMIR and BLA do you all have the answers to the new 20 questions?

Thanks Emir.quite useful.

passed 2day, just used this dump, only got 754 :(
Have MCITP Ent Adm, and now 699 + 693 + 659
This has been the only dump that i had probs yet, and would not adv ppl 2 just use this1

20 New Question
http://www.4shared.com/document/bnvImYix/70-669.html

The key phrase of the question is: "to at least 10 GB"
That means it starts there and can grow more. With the other two options (answers A and D) are maximums, and won't grow any larger than 10GB.
By the way, this is a horrible question, because Technet shows the FileSize regkey as a valid way to increase the cache, but they also produce the tool that does it. The tool is for scripting, which is why I originally thought it wasn't the answer, because you're only changing ONE computer. However, I think its to trick you, because of the "to at least 10GB" which means a minimum.

@ MCTS on Q - "All servers in your environment run Windows Server 2008 R2. All client computers run Windows 7. Each client computer has at least 2 5 GB free disk space. You virtualize applications by using Microsoft Application Virtualization (App-V). The App-V client cache is set to 4096 MB. User profiles are virtualizedstored on a server. You need to increase the size of the file system cache on a client computer to at least 10 GB. What should you do?"


A) Use the AppVCacheSize tool to set the maximum cache size to 10240.
B) Use the AppVCacheSize tool to set the minimum free disk space threshold to 10240. (ANS is B not D )
C) Set the HKLMSOFTWAREMicrosoftSoftGrid4.5ClientAppFSState registry key to 10240.
D) Set the HKLMSOFTWAREMicrosoftSoftGrid4.5ClientAppFSFileSize registry key to 10240.

How sure are you that it is B?

Coz, they ask to " increase the size of the file system cache"

B is to "set minimum free disk space"

They didnt ask to set a limit on open disk space, did they ?

Valid dump in Russia.

MTCS,
After research, I'm thinking the ports are still 443 on the Gateway and 3389 on the Session Host. The reason being the Session Host doesn't do 443 whatsoever. The Gateway converts the 443 into 3389, and then talks to the Session Host via 3389. I also read this:
http://social.technet.microsoft.com/Forums/en/winserverTS/thread/37d12e55-948c-4810-82ee-518dee7558e6

"FYI: Yes, only port 443 is required from the client to the RD Gateway server."

Gateway listens on 443, and Session Host listens on 3389. Seems simple, so that's why I'm going to specify answers A and D.

MTCS,
I agree with all yours, except for the RDP or HTTPS answer, where you are giving a company a preconfigured RDP file. I think the answer is HTTPS. Whenever you specify Connect From Anywhere settings, you are turning on HTTPS. I had a trainer verify this, and a pretty smart systems engineer say the same thing. I just found this as well: "By using this gateway, you not only provide pre-authorized access to you terminal server, you also gain the benefit of using RPC over HTTPS, eliminating the need for additional ports to be open on you firewall and the ability to use RDP behind most corporate firewalls using port 443."

At first I didn't agree with your opening ports 3389 and 443 on the Session Host server. I did some research, and I was still thinking it's 443 on the Gateway, but I'm thinking you're probably right. So, when I take the test (again.) I'm going to put 443 and 3389 on the SESSION HOST servers.

I spent HOURS research that AppVCache tool question, and you are exactly right: It's B!

"

Your company has an Active Directory Domain Services (AD DS) domain that runs at the Windows Server 2008 functional level. All servers run Windows Server 2008 R2. All client computers run Windows XP Professional. You use the Key Management Service (KMS) to manage your volume license activations. All servers have been activated by using KMS. You deploy 20 Windows 7 virtual desktops. The virtual desktop operating systems do not activate. You need to ensure that the virtual desktops activate by using KMS. What should you do?

A)Deploy five more virtual desktops. (NOT A)

B)Run slmgr.vbs with the -ato parameter. (ANS IS B)

C)Use the Volume Activation Management Tool (VAMT).

D)Raise the domain functional level to Windows Server 2008 R2.

Your company has an Active Directory Domain Services (AD DS) domain. You install the Remote Desktop Session Host (RD Session Host) role service the Microsoft Application Virtualization (App-V) 4.6 client on a server that runs Windows Server 2008 R2. You publish applications to the RD Session Host server by using App-V. Partner companies require access to an internal application. You provide each partner company with a preconfigured Remote Desktop Protocol (.rdp) file that enables the company to access the application by using the Connect From Anywhere feature. You need to specify the protocol that each partner company must allow through its firewall to establish the connection. Which protocol should you specify.

A) RDP ( My ANS IS A)

B) HTTPS ( NOT B)

C) RTSP

D) RTSPS

The virtual desktop operation systems do not active.
ans: A : deploy five more virtual desktops?
not B Run slmgr.vbs with the -ato parameter???

A is correct???

Sepcify the protocol that eash parner company must allow through its firewall to establish the connection
: A. RDP
ANS B: HTTPS

B is correct??

Please help .
thanks!!!

Some wrong Answers!!! Passed today in germany. 44Q / 120min.

A) Edit the Sequencer Project (.sprj) file for the applicationadd <OS VALUE="X64"/>.
B) Edit the Sequencer Project (.sprj) file for the applicationadd <OS VALUE="Win7"/>.
C) install the App-V 4.6 64-bit sequencer. Opensave the application package by using the App-V 4.6 64-bit sequencer. (ANS is C not A )
D) Install the App-V 4.6 32-bit sequencer. Edit the application by using the App-V 4.6 32-bit sequencer. Add Windows 7 64-bit to the Selected Operating Systems list.

A) Use the AppVCacheSize tool to set the maximum cache size to 10240.
B) Use the AppVCacheSize tool to set the minimum free disk space threshold to 10240. (ANS is B not D )
C) Set the HKLMSOFTWAREMicrosoftSoftGrid4.5ClientAppFSState registry key to 10240.
D) Set the HKLMSOFTWAREMicrosoftSoftGrid4.5ClientAppFSFileSize registry key to 10240.

A) Create a Windows Firewall inbound rule for port 443 on the RD Gateway serve
B) Create a Windows Firewall inbound rule for port 443 on the RD Session Host server ( ANS IS B not A)
C) Create a Windows Firewall inbound rule for port 3389 on the RD Gateway server.
D) Create a Windows Firewall inbound rule for port 3389 on the RD Session Host server. (ANS IS D )

This was the best source for this test ,so far it has a few wrong answers in it but it will do the trick. Took the test today and got a 860 in USA.

Passed this exam today with score 890/1000, I used only this dump to study, total 44 questions but answers are shuffled. Thanks

Hello Guys,

passed the exam scored 836/1000, there are couple of wrong question but if you study this dumps properly you will make it.

Passed this exam today with score 890/1000, i used only this dump to study and the dump is 100% accurate but answers are shuffled. thanks BLOCK63

I passed this exam today only with this dump.

Hello Jordan

did you use only this dumps and you passed??? and please tell us about order of questions??

thanks in adv,

918/1000 valid in Malaysia, Thanks

I Took this exam today scored 800 and now I'm MCITP ;) . looks like maybe some wrong answers!!

Dump is valid in Buenos Aires - Argentina

Passed this week. All questions were from this dump

This dump is valid in France, successfully passed yesterday !!!

Took this exam on Friday scored 890 . looks like maybe some wrong answers!! But thanks blok63!!!

Hey Thanks a lot blok63 :)

Question 40 - Answer is not A (<os value="x64"). C is correct answer (Install the app-v 4.6 64-bit .).