Pass Your Microsoft 70-410 Exam Easy!

Question 2

Your network contains an Active Directory domain named adatum.com. The domain contains a member server named LON-DC1. LON-DC1 runs Windows Server 2012 and has the DHCP Server server role installed.
The network contains 100 client computers and 50 IP phones. The computers and the phones are from the same vendor.
You create an IPv4 scope that contains addresses from 172.16.0.1 to 172.16.1.254.
You need to ensure that the IP phones receive IP addresses in the range of 172.16.1.100 to 172.16.1.200. The solution must minimize administrative effort.

What should you create?
A. Server level policies
B. Filters
C. Reservations
D. Scope level policies
some answers says A others says D, can someone please explain which one is correct and why/how you would configure that .

correct answear is scope policy
http://blogs.technet.com/b/teamdhcp/archive/2012/08/22/granular-dhcp-server-administration-using-dhcp-policies-in-windows-server-2012.aspx

Failed today..665 marks..before i have failed..huhu

Valid even though this dump has a lot of wrong answers. Passed on 11/11. Had studied this and ROD's dump for right answers. THANK YOU.

Hi
I passed 3-4 days before with really lot luck. a little above 700.
Really hard test and all these different vce may confuse more than help.

I studied Anna's with my own corrections (about 30+q) and lately was the one of ROD which had some nice explanations and another point of view in some answers.i think ROD and ANNA can be combined together to help you study.

My low pass score was because I couldn't memorize all these questions/answers.sad to say but i learnt so little from this cert I got.

Good luck to all.and don't forget there is a 2nd chance for free!

@SpainAdmin which one by scottcha are you referring to, as he has a couple of them.

Pass today 745. The exam has some worong question even with the corrections of Jack. If you want to pass,make this exam and search for same commands on google, like redircmp.exe and others. Also make the exam from Scotcha. This one has less errors.

who can tell me the correct answer for Q60

just pass today with 750. 100% from this dump. make sure you know what the questions are . not the answers :)

@Rick , Can you please help me with the 4 quesitions I asked, just below your coment, I am trying to find the right answers for those 4 but I cant find it anywhere

Dump is 100% valid but 30% answers are incorrect. You may not be able to pass if you only study this dump. You need to find the write answers.

Question 4
Your network contains an Active Directory domain named contoso.com. The network contains 500 client
computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy. You deploy a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server role installed. You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?

A. Configure the Security settings of the contoso.com zone.
B. Remove all root hints.
C. Create a primary zone named "."
D. Create a primary zone named "root".
E. Create a primary zone named "GlobalNames".
F. Create a forwarder that points to 169.254.0.1.
G. Create a stub zone named "root".
H. Create a zone delegation for GlobalNames.contoso.com.
Answer says BC, question 3 and 4 are similar, so why is G not correct here yet it is correct in question 3.

Question 3
Your network contains an Active Directory domain named contoso.com. The network contains 500 client
computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server role installed. You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?

A. Create a primary zone named "root".
B. Create a primary zone named ".".
C. Create a stub zone named "root".
D. Create a zone delegation for GlobalNames.contoso.com.
Answer says C, question 3 and 4 are similar but why is B not correct in q3 yet it is correct in q4?

Question 2

Your network contains an Active Directory domain named adatum.com. The domain contains a member server named LON-DC1. LON-DC1 runs Windows Server 2012 and has the DHCP Server server role installed.
The network contains 100 client computers and 50 IP phones. The computers and the phones are from the same vendor.
You create an IPv4 scope that contains addresses from 172.16.0.1 to 172.16.1.254.
You need to ensure that the IP phones receive IP addresses in the range of 172.16.1.100 to 172.16.1.200. The solution must minimize administrative effort.

What should you create?
A. Server level policies
B. Filters
C. Reservations
D. Scope level policies
some answers says A others says D, can someone please explain which one is correct and why/how you would configure that .

Hi can you guys help me with these 4 questions, I have posted them one by one


Question 1

Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 and has the DHCP Server server role installed. You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
scope name subnet 1, ipv4 192.168.1.0/24
scope name subnet 2 ipv4 192.168.2.0/24

The DHCP clients in Subnet1 can connect to the client computers in Subnet2 by using an IP address or a
FQDN. You discover that the DHCP clients in Subnet2 can connect to client computers in Subnet1 by using an IP address only. You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.

What should you add?
A. The 006 DNS Servers option to Subnet2
B. The 015 DNS Domain Name option to Subnet1
C. The 006 DNS Servers option to Subnet1
D. The 015 DNS Domain Name option to Subnet2

Answer in brain dump says D, I would think if it is only one answer then the answer should be A and if it was 2 answers than it would be A and B. Because how does the client resolve a DNS domain name if it does not have the ip of the domain server to start with which it gets from DNS server option.

Himan
which question did u got ? can u remember?

Dump is still valid. Today pass with 7XX

Thanks Aussie for your help.i really appreciate it

@Andy:
Option: D. On Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet.
(least incorrect Answer)
-------------------------------------------------------------------------------------------------------
http://technet.microsoft.com/en-us/library/hh848520.aspx

@Andy:
Option: D. On Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet.
(least incorrect Answer)

@kal: Please Open the file in VCE Designer, not in VCE Manager.

dump is valid. I LOVE U ANNA. XOXOXOXOXOX

cleared with 775 today valid dump. thank you ANNA i love u, kiss u

G'day Aussie,
i just wanna clarify something
is question number different the item number ??
coz every time i open the vce the questions order are different

45q is correct in the dump, maybe Jackc made a mistake.

q45 and q97 are the same questions, but the q45 is corrected by jackc and q97 not. what is the correct answer? please can somebody help me?

Got These Questions in Exam: 4, 25, 27, 28, 38, 48, 54, 57, 65, 68, 70, 81, 84, 89, 90, 93, 70, 81, 84, 89, 90, 93, 100, 104, 110, 114, 117, 127, 137, 144, 149, 154, 156, 178, 181, 189, 201, 211, 231, 263, 265, 271, 274, 279, 284, 287, 297, 299, 303, 307, 313, 314, 316, 318, 319, 320,

Valid Dump cleared today with 775, some wrong answers though

Can anyone check q84?
Thanks in advance

can somebody explain q45. why is the answer for server2 not new hardware but only a software upgrade

Exam Q229.
I think the answer should be:
B. Server Manager
H. New-StoragePool

http://www.petri.co.il/create-storage-pool-on-windows-server-2012.htm#

dump is valid but i failed

its valid dump. ty for share. but a lot of questions got wrong answers.

Passed with 870 yesterday. its valid dump but u should check Leon and Jackc 's comments. i think 30-35 questions re wrong.

Passed using this dump, Snowden. Focus on this dump, use snowden dump and Technet to confirm answers.

There are many incorrect answers in this dump but the questions are more relevant than snowden.

@Jackc are you sure that your list with answers will be correct?

Valid Dump with 790 !

This is my checks (with Snowden Dump) :

Q45 good answer : Clean install on new h / clean install on existing h / upgrade
Q60 good answer : remove adatum / convert universal group / convert global group (ref snowden Q237)
Q61 good answer C
Q63 good answer D (ref snowden Q70)
Q82 good answer : IPV4 General (ref snowden Q92)
Q90 good answer D
Q95 good answer B (ref snowden Q115)
Q99 good answer B E
Q111 good answer A (ref snowden Q231)
Q116 good answer D (ref snowden Q36)
Q136 good answer D (ref snowden Q77)
Q137 good answer D (ref snowden Q75)
Q150 good answer D (ref snowden Q64)
Q155 good answer A (ref snowden Q55)
Q167 good answer C (ref snowden Q42)
Q171 good answer : Enable Option 60 PxeClient / Enable the Do not listen on DHCP ports . (ref snowden Q33)
Q173 good answer B (ref snowden Q31)
Q174 good answer A (ref snowden Q228)
Q193 good answer C (ref snowden Q234)
Q206 good answer B (ref snowden Q231)
Q208 good answer C (ref snowden Q30)
Q217 good answer D
Q224 good answer D (ref Snowden Q25)
Q246 good answer A (ref snowden Q236)
Q334 good answer A

help!!!
Any one?
Q217
A,Remove all root hints
B,Creat a primary zone named Globalname
C,Creat a primary zone named root
D,Creat a stub zone named root

Q150.
Asks about how to enable ABE.

Should be D (not C) From Server Manager, Modify the properties of Home.

Don't like that so many question have no good answer (ABCD no answer) so you cannot check your skills properly. All hotspots, dragdrop, and other similar are just explained and proper answer is provided but you should click no answer to make it correct.

Thank you Leon, please continue with more questions if you are able too, your format thus far is the easiest to read and more people should follow your example.

have studied first 100 questions and here are my comments with wrong answers:

60Q.(hotspot)
1) Remove adatumuser1 from Group1
5) Convert Group1 to a universal group
3) Convert Group1 to a global group

63Q.
Correct answer is: Remove-NetLbfoTeam

77Q
ANSWERS FOR THIS Q DIFFER A LOT IN ALL DUMPS.

80Q
ADDED ANOTHER 3rd OPTION:
a storage pool on Disk 2 and Disk 3


82Q
Correct answer is GENERAL

84Q (hotspot)
4) Remove contosouser1 from Group1
5) Convert Group1 to a universal group
3) Convert Group1 to a global group

90Q
Correct answer: Enable the link of GPO1.

95Q
Correct answer:
On Server1, install the Remote Desktop Visualization Host (RD Visualization Host) role service.

There are some blatantly obvious errors in this test. Such as Q90. Should be Enable not Enforce.

Also some of the reasons in the show answer area contradict what has been set for the answer.

this dump is completely valid!!!!thank you so much bro!!!!anna thank you!!!!!

@bruce. are you confirming that the passguide dump uploaded by @scottcha with 338q has the most correct answers?

@ bruce
are there any new question in your exam ?

this dump have many wrong answers.
And i used passguide 338q dumps, passed today with 870.

Question 86:
Your network contains and Active Directory named contoso.com. The domain contains 100 user accounts that reside in an OU named OU1.
You need to ensure that a user named User1 can link and unlink Group Policy Objects (GPOs) to OU1.
The solution must minimize the number of permissions assigned to User1.

A: Add User1 to the Group Policy Creator Owners group.
B: Run the Set-GPPermissions cmdlet
C: Modify the permissions to the \contoso.comSYSVOLcontoso.comPolicies folder.
D: Run the delegation control wizard on OU1.


The answer says its B, but the only valid parameters for setting permissions with the powershell cmdlet is GpoRead, GpoApply, GpoEdit, GpoEditDeleteModifySecurity or None, which is more than required? Therefore the correct answer must be D, which lets you specify to only give the permission to link or unlink.

This dump is still valid, wrote yesterday. Passed in the 700s.
Saw one or two new questions but weren't too bad.

Valid. 790 Passed today in Sydney. No new questions, but at least 20 questions I used my own answers.

Failed this exam many of the questions are wrong, anna hi mur hudu goxx kemm andek!

Passed today @745 in the US. I think all the questions were from this dump. But many answer are wrong. Good luck!

@Remco, so for contoso.com you select copy and in adatum.com select paste

@Eric,
They say in the complete question; make only one selection in two of the rows. So I need an answer for each line.

@Remco
Copy from contoso.com
Paste to Adatum.com
The rest you don't specify

This questions seems to be wrong:
Could anyone help me?

Two AD forests:contoso.com & adatum.com with two-way forest trust.
Have custom starter Group Policy objects (GPOs) defined in contoso.com.
Need to ensure that the same set of custom starter GPOs are available in adatum.com.

action StarterGPOs container in contoso StarterGPOs container in adatum
copy y/n y/n
bakup y/n y/n
paste y/n y/n
restore y/n y/n
import settings y/n y/n

I think I found the answer. You can migrate the first 3 but not the virtual floppy disk

You have a Hyper-V host named Server1 that runs Windows Server 2008 R2. All of the virtual machines on Server1 use VHDs.

You install the Hyper-V server role on a server named Server2 that runs Windows Server 2012. Server2 has the same hardware configurations as Server1.

You plan to migrate the Hyper-V host from Server1 to Server2 by using the Windows Server Migration Tools.

In the table below, identify what can be migrated by using the Windows Server Migration Tools. Make only one selection in each row. Each correct selection is worth one point.

virtual machine configuration yes/now
hyper-v settings yes/no
the vhd files that are attached to a virtual machine yes/no
the virtual floppy disk yes/no

I know for sure the first 2 can be migrated. What about the last 2. I would think the VHD as well?

@Eric veel succes donderdag kan je me laten weten als je geslaagd bent welke VCE's je gebruikt hebt en wat je eventueel hebt aangepast dan zou ik je erg dankbaar zijn ik ga over een goede 10 dagen examen doen.

Als ze aangepast zijn zou je ze me kunnen mailen je kan ze ook op dropbox zetten. laat de locatie dan nog even weten mijn mail lan_scene@hotmail.com

@ just one more question from Unknown
There are 2 ways to do,
1, remove all root hints.
2, create a primary zone named ".".
the stub root answer is not correct.

Dump still valid in Brazil.
It is necessary to understand all the questions, because this dump has some wrong answers!

Ik heb mijn examen nog niet gedaan. Dat doe ik as donderdag

@Erik, heb jij je examen gehaald , en met hoeveel punten?

Vallid dump, but with many wrong answers.

Took the exam today: all questions were from this dump. But there many wrong answers in here. So review them well.

Remove all root hints!!!

Your Network contains 500 Clinets with Win8. All Clients using a web proxy. You deploy a server named Server1 runs Server 2012. Server1 has the DNS server role installed. You configure all of the client to use server1 as their primary DNS server. You nedd to prevent Server1 from attempting to reslove Internet host names for the client computers.

Is Answer E: Create a stub zone named "root" correct?

I think it is B Remove al root hints.

Thanks

Thank you Anna, I passed with a 790 today! If you lived around here I would take you to dinner. All questions came from this dump, some answers were not correct.

is not valid today exam score 480 ??

Q313
Or it is yes, no, no, no.
Am I right?

Is it mistake in Q313. I think that it should be yes, yes, no, no.

The answer of Q152 must be A. and not B.

@Nick, Modify the Security settings of GPO1. The policy is applied but not to all users in that OU. So probably the apply to security setting is set to a specific group instead of authenticated users

Your network contains an Active Directory domain named contoso.com

You have a GPO named GPO1 that contains server user settings. GPO1 is linked to an OU named OU1.

The help desk reports that GPO1 Applies to only some user in OU1.

You need to configure GPO1 to apply to all user in OU1.

What should you do?

A. Modify the Security settings of GPO1
B. Disable Block Inheritance on OU1
C. Modify the GPO status of GPO1
D. Enforce GPO1

Answer says A. Why not D ?

I think Q90 must be answer D. Enable the link of GPO1.

Hi everybody passed today 760 used:
1. Microsoft.PracticeTest.70-410.v2013-06-29.by.Snowden.429q (small number of errors)
2. Microsoft.Yesuse.70-410.v2013-09-23.by.nofenofe.336q (large number of errors)
3. Microsoft.Exactquestions.70-410.v2013-10-01.by.Anna.336q.vce (large number of errors)
4. All questions new and old was from the top three vce's

Valid dump. Passed today and saw many of the "new" questions from this dump on my exam. Also saw "old" questions from Snowden dump.

Valid Dump, though ans are incorrect for some questions. Passed exam @ 715

Hi Mark , give me also feedback once you have finished taking the exam

The only suggestion I have is to study. One way or another that's the only way to ensure that you can pass, whether it be a book, CBT, or I don't know, maybe checking Microsoft's suggested TechNet links on the exam's description page. Blindly memorizing answers is not the best approach to passing exams.you aren't really gaining anything and if your goal is to get a job, your employer will quickly find out that you have no clue what's going on because you didn't spend time to learn the material.

No dump is 100% correct, so you're going to have to know the exam topics and related material to know which answers in the dump are wrong. Use the dumps to gauge how much you've learned, not to memorize what you hope are the right answers before you potentially go wasting your time and money.

Hi guys! ***PLEASE ATTENTION***

All the questions in dumps we face on the exams but we still fail. I think answers are not correct. We find the right answers someway.

Any suggestion about it?

Passed with 700.Dump questions are valid. Double/Triple check the answers with other dumps or Microsoft site

Just passed with a 700. This dump is pretty valid. Saw 5-10 questions not on this dump.

In Italy is valid 910. Some no present answer or inverted answer

I'm taking it tomorrow afternoon Mark.

Option D.Enable single-root I/O virtualization (SR-IOV) on Server1.

Any one?
Your network contains an Active Directory domain named contoso.com. The domain
contains a member server named HVServer1. HVServer1 runs Windows Server 2012 and
has the Hyper-V server role installed.
HVServer1 hosts 10 virtual machines. All of the virtual machines connect to a virtual switch
named Switch1. Switch1 is configured as a private network. All of the virtual machines
have the DHCP guard and the router guard settings enabled.
You install the DHCP server role on a virtual machine named Server 1. You authorize
Server1 as a DHCP server in contoso.com. You create an IP scope.
You discover that the virtual machines connected to Switch1 do not receive IP settings
from Server1.
You need to ensure that the virtual machines can use Server1 as a DHCP server.

What should you do?

A. Enable MAC address spoofing on Server1.
B. Disable the DHCP guard on all of the virtual machines that are DHCP clients.
C. Disable the DHCP guard on Server1.
D. Enable single-root I/O virtualization (SR-IOV) on Server1.

choose B Andy

Any one?

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 and has the Hyper-
V server role installed.
On Server1, you create a virtual machine named VM1.
When you try to add a RemoteFX 3D Video Adapter to VM1, you discover that the option is
unavailable

You need to add the RemoteFX 3D Video Adapter to VM1.
What should you do first?

A. On Server1, install the Media Foundation feature.
B. On Server1, install the Remote Desktop Visualization Host (RD Visualization Host) role
service.
C. On Server1, run the Enable-VMRemoteFxPhysicalVideoAdaptercmdlet.
Microsoft 70-410 : Practice Test
D. On Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet.

when do plan to take the exam dan?

It's a ripoff but is it valid?

Another rip off. You can tell because the uploader is using simple girls' names.

Q279 answer should run the delegation of control wizard on OU1 i think.

I think this is a straight copy of another test on the site because I am starting to see a few of the same wrong answers. The power failure file system question Q334, answer is NOT FAT32.

I've gone through 126 of the 336 questions so far most of the answers have been correct.

what about some Descriptions ??