Pass Your Microsoft 70-643 Exam Easy!

prty nja i hope 2 see when i get out of th halls but thanks keep doing good

the Dump is valid in united kingdom

Just did the exam last friday and got 1000 with this dump! it's working in brazil!

Valid.
Passed today.
853/1000 in Egypt 28/4/2011

passed today thanks

Passed 795 today in RSA. A few new questions I did not recognize but might be contained in SerJuan's dump. I will admit I did rush my studies and the actual exam because of lack of time outside of work. All in all, this dump contained most of my exam questions. Although one or two where phrased differently and one or two question details contained in the dump where not in the exam. I think they change the questions slightly to make it harder to identify.

Thanks to the ninja for bringing his questions to the party.

Not updated, use SerJuan instead. Passed today with SerJuan dump: 1000/1000, 55 questions.

PS
SerJuan's dump is based on this one, so the credits go also to PartyNinja and the people before him who contributed to the dump!

PPS
SerJuan's dump got a couple of corrected answers. And one more needs a little fix up. See the SerJuan's dump thread.

Valid in The Netherlands, got 1 question from exam from SerJuan.

valid in china.2 new question.903/1000.55question

valid in RSA. 90%

05.04.2011 - 90% valid, 4 new questions, passed in Germany (Score 945)

90% valid, 6 new questions, today passed in Germany with a score 936
the new questions only inside in Microsoft.selftestengine.70-643.v2011-03-22.by.SerJuan.249q.vce

I'm passed on 4/4/2011 score 986/1000 valid

Found an error in the answer to the following question (just the marked answer is wrong, the explanatory image for the answer in the dump is correct):

Your network contains an Active Directory domain. The domain contains a server named Server1 that has Microsoft SharePoint Foundation 2010 installed. You install the SMTP Server feature on a server named SMTP1. From Central Administration on Server1, you configure SMTP1 as the outbound mail server for the SharePoint farm. You need to ensure that SMTP1 can deliver all email messages sent from Server1.
What should you do?

A) ..
B) ..
C) On SMTP1, configure the Authentication settings. (WRONG)
D) On SMTP1, configure the Relay Restrictions settings. (RIGHT)

Bye

Still valid in UK. 5 new questions.
Cheers to PartyNinja!

This dump is not valid in myanmar
Tody fail with 678 marks
Please update ....

Valid in Germany as of 31 March, 4 new question

@ Hans
Ouch! Sorry, you're right, i misread some docs and tough it was a server option!

The answer in that other dump is wrong, then..

Thanks!

@Draven

The topic is, that you change the port used by kms and this is not possible with skms, then skms is only a command for the client.


/sprt <PortNumber>

Sets the TCP communications port on a KMS host. Replace <PortNumber> with the TCP port number you want to use. The default setting is 1688.

#############

Manually Assign a KMS Host

If your network does not support DDNS, you need to manually assign a KMS host to your KMS clients. Manually assigning a KMS host disables auto-discovery of KMS on a KMS client.

To manually assign a KMS host to a KMS client

d. To assign a KMS host using the host's NETBIOS name, type:
cscript windowssystem32slmgr.vbs /skms <NetbiosName><:port>

http://technet.microsoft.com/en-us/library/cc303280.aspx

@ Hans

C and D differs only in the "location" (server o client)

The command is for the server (answer C), no doubt. And the, restarting the server (answer A), it will update the SRV record in the DNS. The SRV record contains the port, so the clients know what port to connect to. I'm sure. :)

And anyway, look here, there is the exact question with A and C answers:
http://www.docshare.com/doc/306182/Test4pass-Microsoft-exam-70-643-dumps-pdf-fil

@Draven

but C is only with the commandline parameter slmgr.vbs ­sprt the correct answer, then skms doesn't change the used server port.

I think there maybe be a wrong answer to the question:

Your company has a single Active Directory domain named contoso.com. The domain has two domain controllers and 60 member servers.
All servers run Windows Server 2008 R2.
One of the domain controllers has Key Management Service (KMS) installed and activated.
All servers use KMS auto-discovery to find the KMS server.

You need to change the port used by KMS from its default port to port 12200.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. Restart the slsvc service on the KMS server.
B. Restart the DNS Server service on the KMS server.
C. On the KMS server at the command prompt, run the slmgr.vbs ­skms KMSServer: 12200 command.
D. On the client computers at the command prompt, run the slmgr.vbs ­skms KMSServer: 12200 command.

The dump says A and D, the correct answer should be A and C, am I right?

Passed today 31st March 2011.
Valid in England. All questions from this dump. Thanks a lot Nightwish Jackno and PartyNinja for all your work!!!

Passed today in Qatar - Score 890 2 new questions
thanks

passed in egypt yesterday 850 100% valid ty ninja guy :)

Valid in Nigeria but 4 new question...pass today 945

Valid in Nigeria but 4 new question...pass today

Passed today in Egypt - Score 972
2 new questions.
Special thanks to PartyNinja.

This dump is vaild a few questions from have changed

it's valid in China, but it's not fully dump, i think the fully should be "Microsoft Pass4Sure 70-643 v2011-02-15 by Nightwish 247q.vce ", and there are some different answers between two dumps.

Awsum Dumps by PartyNinja
STILL VALID IN PAKISTAN
PASSED TODAY 1000/1000
MANY THANKS 2 PARTYNINJA

Passed with 900+.100% valid but 5-8 questions were from the other dump by Party ninja.Tahnks PartyNinja U saved me.God Bless You.
Please upload 70-646-647 .
Thanks

still valid in the netherlands today.

passed with 900+

I just missed one question although it was from the dump but appearantly the answer was wrong

anyway thanks for your hard work "PartyNinja" your dump organizing really made the half of my study time

thank you

still valid, passed today only one new question,959
thank you and good luck

it still valid in thailand

Took this exam 25-3 in the Netherlands. Still very valid. 1 new question for me. Passed with 972. Thanks PartyNinja!!

Passed this test last week. The content is still valid within the UK. I had four new questions about Hyper-V. Study well and you will pass. Thanks to everyone that helped to create this dump.

Passed today in Australia, 945/1000 scored. 55 questions and 4 new ones but straight forward ones. 100 % valid dumps. Thanks to this site, I am MCITP now

Very valid. Passed on Friday with 972/1000. Only 5 new questions

This work.. passed on friday.. this is very good. it helped..

Passed today 1000/1000, mixed question from this dump and Nightwish.
100% Valid. Thanks!

Passed today in DC, 959/1000, 55 Questions, maybe 1 not in dump
100% valid

Great info.. one question on test wasn't familiar. Passed over 900. THANKS!!! Greetings from Texas!

100% valid. Passed today.

Thank you!!

What a wonderfull dump. Passed in Germany with more than 900.
Thoank you. Perfekt job.

passed today score 900 in egypt
still vaild
no new question

Valid in INDIA 959. TahnQ to Jacno, Nightwish, Party Ninja.Thanks alot guys.. :-)

Still Valid in KH, 918/1000 (5 new questions)

still valid in egypt 986
55q

passed 893 - valid in USA.

valin in Turkey. I passed yesterday this exam 1000/986

Q.
You install a Microsoft .NET Framework application on a Web site that is hosted on the server in a folder named wwwroot.
The .NET Framework application must write to a log file that resides in the Program FilesWebApp folder.

Why the answer is "Minimal"???

Microsoft web page say that:
Specifies a low level of code access security, which means that, in addition to the restrictions for Medium, the application cannot do any of the following things by default: Write to the file system.
Specifies a minimal level of code access security, which means that the application has only execute permissions.

Stil valid in BR, got 904 today.

Passed today 1000/1000, 54q only 1 new question.. This dump is awesome :)

Valid in Botswana. A coupe of new questions and new drag and drop.

Passed today using this dump thanks 900/1000. There was one drag/drop the vhd file one and a few new questions.

Still a valid material for US // Passed 11/3/11

Passed today in the US with a 877 with this dump. Thanks for the assistance!

did you all do the exam in your local language or in english?
greets

100% valid this dump.
I'm Korean.

Passed 3/04, thanks so much.
Mainly used Nightwish 186q.vce and PartyNinja's 237. Excellent job!!!!!!!!!!! Much thanks to both of you!

Valid in hk. 1 new question. Thanks for the dump.

Thanks, took it yesterday, valid in CZ. Use it but also study for the exam!!!

thans vish
Thanks .PartyNinja
i'm passed to day in egypt score 959
this exam valid 100%
but some new quistion
i remember one quistion :
your company network contains server taht run windows server 2008 r2 standard
to security company state you need to enable bitlooker on disk
what should you do ?
answer :
* upgrade the server to windows server 2008 enterprise

this dump is valid in india . all questions were from this dump . Thanks .PartyNinja. i scored 945.

@ rajy there are no simulations

Valid in Germany
55 Questions no testlets

1 new question:
Q:priority of CPU usage for VM1?
A1:?
A2:weight for CPU priority for VM1
A3:?
A4: in VM set CPU max for VM1

i think its A2 but not sure

is there simulation in this exam ????
please responded to me

Dump was great valid 100% Thailand
Thank you !

Hello all
This dump not working fine
how did you do to start it every time i recieve an error message
please can someone help????

This Dump is 100% Valid!!!!
Got through exam today with 980+..
Thank you very much for your help Bro..

Valid.
Passed today.
959/1000

Dump Was great ! Thanks PartyNinja for the hard work !!!!! Valid in US

best Dump..with explanation..
passed in INDIA today..918/1000..all from this dumps..but i have confusions in some answer so could not make 1000/1000 again,,,,(done in 640)..m MCTS finally..1 more and MCITP... i also used dumps by NIghtwish..it has many repeated questions..

Great dump , passe today thx to this one, had 3 new questions

PartyNinja you are truly THE MAN! This is an awesome dump. I wish I'd looked here at the start of the week again because I have my exam in about 2.5 hours and there is no way I'm going to get through 234 questions between now and then :(

I would like to agree with others - would you mind (I know it's your time) doing one of these for the 70-647 exam? I will be sitting it on the 14th March. Cheers!!

Dear Sir,
I passed my exam 70-643 from two dayes ago but till now i didn,t see it in my MCP profile ?

Props on your dump PartyNinja. 100% valid in USA. Echoing others, it would be awesome if you could do a 70-647 dump!

Novaz, you might be right http://technet.microsoft.com/en-us/library/cc754779.aspx says that trust levels blow medium cannot write to the filesystem, however it states "by default" in the sentence. I couldn't say if this means that even in minimal writing to the filesystem is still possible or not. Therefore I didn't change the answer from the original dump.

Question about one question !

You install the webserver on a server that runs windows Server R2. You install MS .NET Freamework application on a web site that is hosted on the server in a folder wwwroot. The .Net Framework application must WRITE to a log file that resides in the Program FilesWebApp folder. You need to configure the .net Framework turst level setting for the web site so that the application can write to the log file. What should you do?

A: Set the .net framework trust level Full for the web site.
B: " - " High
C: " - " Minimal
D: " - " Medium.

Acording to the test it says C Minimum as the correct answer, but I think it should be D medium, or are im wrong ?