Pass Your Microsoft 70-564 Exam Easy!

Thanks Roman.
Today i passed it. so happy :)

Valid Dump. Scored 833

100% Valid Dump
http://maxbox.maxlc.com/Exams

this dump not valid please move it !
i fail today with score 660/1000
i'm so upset

Dumps are still valid.
Passed with 833 score.
All Questions has come from this dumps only but due to some answers are incorrect i got 833 score.

who can correct the wrong answer?

i pass 2day
with 800
thanks god

when i fail i Confused with q
that related (web application or website)
final
thanks to Roman

Apologize
I mean I I fail

This is because anger

i fill 2day with 686 i know
bad luck
but all questions are from this dump
there are wrong answers
u must answers all questions like this bump to pass max 800
i Forgot 3 questions so i fill

I am going for the exam tomorrow

I hope that the words be true

Special about mistakes

see u tomorrow

Dump is valid, all questions are from this dump. Passed today with 800/1000.
NOTE: answers are not in the same order like dump and some answers are wrong, but you will still pass anyway.
Thank Roman

Dump is valid, all questions are from this dump. Passed today with 800/1000. Thank Roman

Passed with 866.This dump is valid.
Even though there are a few wrong answers in this dump,you'll still pass.

Passed today, 62 Questions score = 700 although I memorized all the answers and it was 100 percent from this dump !!!!!!
this means that a lot of questions have wrong answers.

I passed this exam yesterday with score 800 , Thanks For Dump It's very good , But there is some questions is wrong , cuz there is no questions out of the dump in the exam and I have answered the same answers exactly in this dump and got 800 score , That means there is 7-9 Questions in the Dump is Wrong , Thanks again

I want to chose the best to study for exams

Is no one interested in the exam now

Introduced the history of the exams,
I think this exam
Is the best
Is there another view,
Or tips

Dump still valid. Passed with 800

You are creating an ASP.NET application by using .NET framework 3.5. The application will run on a web farm with no server affinity. Users access the web site daily.

You are designing a strategy for persisting user search history.

You need to ensure that a user's search history is persisted from one day to the next.

What should you do?

(A) Use Session with SessionStateMode.InProc
(B) Use cookies
(C) Use Session with SessionStateMode.SQLServer
(D) Use ViewState.

The answer in the dump is (B) Use cookies. I would like to challenge this as the requirement laid down in the question is to be able to persist user's search history from one day to another. So I thought SQLServer or InProc would be more appriopriate answer?

Thanks.

still valid..passed with 900 on 19-03-2012

@pa. Yes i passed. 800++. I think there are some wrong answers on the dump but the questions are exactly the same. Just review the answers against MSDN.

@Tin.did you pass the test? what is your score..

please suggest me if this dump is still valid.I have my exam next week.

No, there is a new subject in www.examcollection.com/70-564.html with 107 sentences

No, there is a new subject in www.examcollection/70-564.html with 107 sentences

Still valid yesterday. I got only 1 new question

OMG!It's change while I'm taking the test!fail

@Roman: Ok, if the resorces are for all users, then imperstionaton="true". Thanks!

@Jose, sorry i am mistake, the question was about encapsulate AJAX and is in both dumps. Sorry. And good luck!

@Guys: DO NOT FORGET ABOUT QUESTION ABOUT DbDataFactories. In dumps still incorrect answer. BUT CORRECT answer is:
!!!!!!!!!A. Use the System.Data.Common.DbDataFactories and DbDataAdapter classes. !!!!! <- THIS IS CORRECT. I had this questions on exam and I have 100 % from data access.
Check my comments below.

@Moe. About impersonation. Resources are same for all users but some users have permissions for some resources and other do not have. That is why Impersonation should have value "TRUE" to check if current logined user have access for some files or not.

Moe, what was the question that is not in this dump?

Thank you / Gracias.

Hi!
I made it today and i pass (766). All questions are in teh dump, except one. But this is in other dumps. Thanks Roman (and all of you).

Question
You are creating an ASP.NET application by using the .NET Framework 3.5. User accounts in Active
Directory are configured to provide access to resources. You need to ensure that users can access the
resources through the application. Which XML fragment should you use in the Web.config file?
A. <authentication mode="Forms" />
<identity impersonate="false" />
B. <authentication mode="Forms" />
<identity impersonate="true" />
C. <authentication mode="Windows" />
<identity impersonate="false" />
D. <authentication mode="Windows" />
<identity impersonate="true" />

Dump says D

the Active Directory are configured to provide access to resources, the question is:
the Active Directory is configured to provide for each user his resources or for any user all resources?
In case each user his resources it would be
C <authentication mode="Windows" /><identity impersonate="false" />
In the other case,
D <authentication mode="Windows" /><identity impersonate="true" />

What do you think?

Thank for all of your helps.I passed with 833 marks on March 8 ^^

Mostly valid, 3 new ?s from 62. Score very low but passed. Still many of wrong answers- use file as study tool and do ok.

@Roman..nice, congrats

Hello! I passed today! My scope is 866.

@Sapinette congrats..@Roman, u've done a good work, pls dont forget to let us knw ur score by 2morrow.

I pass the exam on March 5 with over 800 marks. All the questions are in this dump. Thank you everyone, especially Roman.

@KHTeh
Maybe it is typo in answers, but I 100% sure that you should use Factory pattern in such situations. We use same approach in our company to implement projects, I also read about this approach in 70-562 TS: Microsoft .NET Framework 3.5, ASP.NET Application Development BOOK. at page 451 "Using DbProviderFactory Classes".
That is correct way to implement connections to various databases in project.

You are creating A5P.NET applications by using the .NET Framework 3.5.
The application uses the DataSet and DataAdapter classes to retrieve and update data. Data can be stored in Microsoft SQL Server 2008 databases or in Microsoft Access databases.
You are designing a strategy that allows the application to function appropriately regardless of the database management systems used.
You need to implement the strategy by using the minimum amount of development effort. What should you do

A. Use the System.Data.Common.DbDataFactories and DbDataAdapter classes.
B. Use the System.Data.SqlConnection and SqlDataAdapter classes.
C. Use the System.Data.IDbConnection and IDbDataAdapter interfaces.
D. Implement an abstract base class that defines methods for the data operations that must be performed by the application. Create a class that inherits this abstract class for each kind of database that must be supported by the application. Modify the application to use these classes instead of DataAdapters.

Why do you guys think the answer is "A"? There is no such thing as DbDataFactories in the System.Data.Common namespace. However, there is DbProviderFactories. Unless it is a typo in the dump answer "A", there is no correct answer in this question.?

@Waqas
FindControl() doesn't initialize controls, It 'Looks for' already initialized controls on page. But in questions: "You need to initialize the dynamically added controls so that they are accessible during the lifetime of the page.".

For initializing controls you can use ParseControls() or LoadControl() methods.
In answers we have only ParseControls(). So that is correct one.
But you should decide WHEN you should initialize it.
If you need initialize DYNAMICALLY you should do in on PREINIT event. But on preinit event you can do it if you do not have masterpage in your page and you can't add dynamically initialized control to any place holder on page because it is also not initialized yet as a masterpage. but you can add your control directly to 'form' element.
If you will initialize it on Load event you can add your control to any placeholder on page. but you have a condition in question "so that they are accessible during the lifetime of the page". In case initializing control on load event it will not be accessible on preinit init and other events that fires before load,

So correct answer is D)Call the Page.ParseControl() method in the PreInit event of the page.

The application must dynamically build the user interface.

You need to initialize the dynamically added controls so that they are accessible during the lifetime of the page. You also need to ensure that the page code can handle the PostBack events for the controls.

What should you do?
A)Call the Page.FindControl() method in the Load event of the page.
B)Call the Page.ParseControl() method in the Load event of the page.
C)Call the Page.FindControl() method in the PreInit event of the page.
D)Call the Page.ParseControl() method in the PreInit event of the page.

Dumps show the answer D. but i think it would be A. any body have any suggestion?

@Roman, u are correct the correct answer should be A.for further readings,http://www.vistadb.net/tutorials/blog/Using-Generic-ADOnet-Data-Factories.aspx and http://msdn.microsoft.com/en-us/library/fks3666w.aspx

@Ahmad, You should prepare to exam not by QA questions that were provided by vera but should check all points on this page: http://www.microsoft.com/learning/en/us/exam.aspx?id=70-564#tab2.
Questions and answers from @vera will be also helpful but you should check all points from Microsoft skill Measure. I checked few documents from that link, questions are correct but that questions are not from exam.

You are creating A5P.NET applications by using the .NET Framework 3.5.
The application uses the DataSet and DataAdapter classes to retrieve and update data. Data can be stored in Microsoft SQL Server 2008 databases or in Microsoft Access databases.
You are designing a strategy that allows the application to function appropriately regardless of the database management systems used.
You need to implement the strategy by using the minimum amount of development effort. What should you do

A. Use the System.Data.Common.DbDataFactories and DbDataAdapter classes.
B. Use the System.Data.SqlConnection and SqlDataAdapter classes.
C. Use the System.Data.IDbConnection and IDbDataAdapter interfaces.
D. Implement an abstract base class that defines methods for the data operations that must be performed by the application. Create a class that inherits this abstract class for each kind of database that must be supported by the application. Modify the application to use these classes instead of DataAdapters.

IN DUMP CORRECT ANSWER IS C.
BUT I THINK IT SHOULD BE A.

Any suggestions?

One more incorrect question for my opinion:

You are creating A5P.NET applications by using the .NET Framework 3.5.
The application uses the DataSet and DataAdapter classes to retrieve and update data. Data can be stored in Microsoft SQL Server 2008 databases or in Microsoft Access databases.
You are designing a strategy that allows the application to function appropriately regardless of the database management systems used.
You need to implement the strategy by using the minimum amount of development effort. What should you do

A. Use the System.Data.Common.DbDataFactories and DbDataAdapter classes.
B. Use the System.Data.SqlConnection and SqlDataAdapter classes.
C. Use the System.Data.IDbConnection and IDbDataAdapter interfaces.
D. Implement an abstract base class that defines methods for the data operations that must be performed by the application. Create a class that inherits this abstract class for each kind of database that must be supported by the application. Modify the application to use these classes instead of DataAdapters.

In dump correct answer is D. But I think that It should be A.

Any suggestions?

@Roman from Ukraine, thank for ur explanation

@vera, nice to hear from you that you passed this exam. My congratulations. Your picture with result will be useful to find more incorrect answers. I think we can do it.

I toke the exam yesterday and I pass with score 766. I could not pass this exam without @Roman help, thank you!

Good news here, all my 62 questions are from this dump; Bad news is I only get 766, which means there still few incorrect answers; The sectional results shows both Accessing Data and Service and Leveraging and Extending ASP.NET Architecture has the most incorrect answers;

I toke a picture of my sectional results, here is the image:
http://dl.dropbox.com/u/28234558/MS_MCPD/70564_exam%20sectional%20results.jpg

I get 564's test questions and flash memory from transcender; However none of the questions is from this test paper but it will provide more knowledge. The memory flash is like a Q&A question, which I found quite helpful.

Here is the file:
http://dl.dropbox.com/u/28234558/MS_MCPD/MS_70-564_Transcender_QUESTIONS_Feb10%20with%20Memory%20Flash_2012.zip

Feel free to contact me if you need other help. here is my email address:vera.zqin@gmail.com

I agree with Roman. Awnser is AD. Cannot be "C" because you will not be able to post content to the page. "D" will ensure you can post data to the page then back to the server and then encoded it before saving it to database.

@moon, look.
To prevent storing harmful script to database you should encode input HTML, so to do this you should use Server.HtmlEncode() to convert '<' to '<' and etc.
So answer 'A. Use the Server.HtmlEncode method when saving the text to the database. ' - acceptable for out task.
But when user input html in field on form and submit it, form with user html goes to IIS process with ISAPI filters then goes to your site code and your code process it. If ValidateRequest property will have value 'true' IIS will block your request with user htlm and it will not be processed by your site code, In result you will see message with error like: "A potentially dangerous Request.Form value was detected from the client". So to provide user a possibility to save html to database you should TURN OFF validating request on form where user inputs html. So second correct answer is
D. Set the ValidateRequest attribute of the @Page directive to false.

Just write small test application to check how it works and try, it is very simple.
Also you can reed : http://msdn.microsoft.com/en-us/library/ff649310.aspx

You are creating an ASP.NET application by using the .NET Framework 3.5. The application will allow users to enter HTML content into a Web form. The HTML content will be stored in a Microsoft SQL Server database. You need to ensure that the content can be posted to the page. You also need to ensure that potentially harmful script cannot be stored in the database. Which two actions should you perform? ( Each correct answer presents part of the solution. Choose two)
A. Use the Server.HtmlEncode method when saving the text to the database.
B. Use the Server.HtmlDecode method when saving the text to the database.
C. Set the ValidateRequest attribute of the @Page directive to true.
D. Set the ValidateRequest attribute of the @Page directive to false.
E. Set the validateRequestattribute of the pages element to true in the Web.config file.

The dump's answer AD. I think it should be A, C. Pls suggest it

@moon, can you write a question here because toot for viewing question shows them each time in random sequence. Thanks.

I think question 51's answer is wrong. Read this from MSDN.


Use the ASP.NET validateRequest Option
The validateRequest attribute is a .NET Framework version 1.1 feature. This attribute is set to true by default on the <pages> element in Machine.config. It instructs ASP.NET to examine all data received from the browser for potentially malicious input, for example, input that contains <script> elements. ASP.NET examines input received from HTML form fields, cookies, and query strings. .NET Framework version 1.0 does not provide any equivalent functionality, but the IIS URLScan Internet Server Application Programming Interface (ISAPI) filter can perform a similar job. You can also apply the setting to each page using the @ Page tag, as follows:
<% @ Page validateRequest="True" %>

Can anybody suggest for that.

Is there anybody in Vietnam pass this exam in 2012 ?
Please comment when you pass this exam. I very need to pass to graduate !
^.^ :-) Thanks very much !