Pass Your Microsoft 70-342 Exam Easy!

This is not enough to pass the test. I purchased exams key.com test as well. There were more right answers but no one seems to have the updated test questions. I had 61 questions, 4 case studies. Almost 20 new questions and some questions reworded to trick you.

Failed today 4XX... 20 or so new questions. Tough exam.

Is this dump still valid ??

valid.. I passed today with 792

passed with 700 score. 2 much lucky day for me

any one have dump4certs 70-342?

Passed with 792, all questions from dump. Valid dump although some answers are wrong, is enought to pass.

Is this dumps is valid in bangladesh??

is it valid in Bangladesh till now?

this dump is valid, but is necesary doing correction, is poor the score 55.
PD: I passed

is this dump still valid??

@ Ricardo
Hello,
Where can I find this itexamfox dump or someone can provide me a itexamfox 70-342 Dump?
Thank you in advance!

Changed any answer?? Dump is valid??

Passed 723

Passed with 746 (3-5-2014)
this dumps is valid
Exam as follows :
52 Q - time :135 m
4 Q & 5 Q & 31 Q & 4 Q & 4 Q & 4 Q
One question from the outside And
Four questions to answer in change
Thank you Mike good luck

Passed with 7xx...this dumps is valid..the thing only required to get the answers in the mind properly because they use the technique by using same multiple answers so the candidate will got confuse a lot...so dont take hurry...take proper time to questions ans answers.by this dumps..you can take 800+ with no doubt..also try to practice drag and drop questions...Wish you all good luck..

Passed with 792 used only dump of LouCiefer. Thank you LouCiefer

Passed 79-342 with 792 marks by using only Mark dump questions from sharjah. Examcollection is the best site. Please help others and post comments

Hiii All
Any new one passed this dump????


Plz Advice

Alhamdulillah yesterday I passed this exam successfully and got 815 marks. These dumps are still valid and also read the comments in answers carefully.

Does anyone tryied the premium vce yet???

Hello,

Where can I find this Lucifer dump?
Thank you in advance!

Hello All, I could not find Louciefer's dump in here. Where is it hiding?

who is louciefer? and where can i find his dump?

I used LouCiefer his dump to study and passed with 815, thank you LouCiefer and Mike

@ Booga
Proseware Q6: I think Domain Security should be the correct option because currently there is no s/mime option in 2013 webapp.

Proseware, Q9: I think the correct answer is b: set-mailboxserver (to enable group metrics and display the mailtip immediately)
set-distributiongroup is needed for custom mailips which IMHO is not the question here.

Can someone confirm the status of this dump please

Cheers
lost

Is this exam valid in egypt ?

Contoso - Q6 - we have the information that DAC mode is enabled, shouldn't the answer be - 1. Stop-DatabaseAvailabilityGroup 2. Restore-DatabaseAvailabilityGroup 3. Start-DatabaseAvailabiltyGroup ? It's in that article - http://technet.microsoft.com/en-us/library/dd979790%28v=exchg.150%29.aspx (section "Other benefits of DAC mode)

@ booga - re Proseware Q10

agree totally, I had already changed that answer to delegate/send as

A. Datum case:
-All answers look ok.

Contoso case:
-Q1 - I believe the correct answer is E - create a remote domain http://technet.microsoft.com/en-us/library/aa996309(v=exchg.150).aspx
Remote domains support Outlook 2007/2010 clients for OOF settings. No need to upgrade the 2007 clients IMHO.
-Q3 - Very tricky. Since the question asks for 3 actions to perform, I'm inclined to agree with the answer in the dump. However "new-federationtrust" must be used, so thoughts?
-all other answers look ok.

Fabrikam case:
-Q5 - I don't see how disabling all but the two "allow override" rules is the answer. The requirement is to block all PII/financial data...so why not just turn off the "allow override" rules and leave the rest on to scan/do their job? thoughts?
-Q6 - Why is the answer to prevent the owner save as? Wouldn't it be to disable the one for anyone?
-Q4 - dump answer is for MAPI network...they want DAG replication...answer should be BD
-all other answers look ok.

Proseware case:
-Q9 - verified, however set-organizationconfig is used to modify the large audience counts...
-Q4 - Order has to be wrong in the dump. You can't run the New-UMAutoAttendant cmdlet that calls the UMDialPlan if the UMDialPlan isn't created yet...it'll error. I think it should be:
http://technet.microsoft.com/en-us/library/jj673564(v=exchg.150).aspx
-New-UMDialPlan ...
-New-UMAutoAttendant -Name ProsewareAA...
-New-UMAutoAttendant -Name ProsewareDTMFAA...
-Set-UMAutoAttendant -identity ProsewareAA -DTMFFallbackAutoAttendant...
-Q6 - "Users must be able to encrypt email from OWA..." Very tricky. On one hand Domain Security can be used to encrypt email between 2 organizations, but S/MIME is used for encrypting ALL email. Other 2 options are correct. Thoughts??
http://technet.microsoft.com/en-us/library/bb738151.aspx
-Q10 - the "-auditowner" parameter doesn't have a value of "create". In fact none of those given parameters do. Value should be "SendAs", but that takes "-auditowner" out of it. Trying to find out who's sending email as User1, so I'd use the -auditdelegate parameter. Thoughts?
http://technet.microsoft.com/en-us/library/bb123981(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/bb676368(v=exchg.141).aspx
-all other answers look ok.

Trey Research Case:
-Q2 - the "-auditadmin" parameter doesn't have the "create" value available. Thoughts?
I think the answer here should be: set-mailbox legal -auditadmin messagebind,create -auditdelegate harddelete,move -auditenabled $true
http://technet.microsoft.com/en-us/library/bb123981(v=exchg.150).aspx
-all other answers look ok.

This dump is 100% valid in Qatar. I have passed yesterday with 769 score.
But many answers are wrong from this dump.

Not Valid

NOT Valid

Hi all,

Scheduled to take my exam next week, any able to provide the pdf please.

e-mail: resmith2013@hotmail.com

Many thank

Richard

Still valid. Passed 769

Still valid.

Still Valid. Passed with scored 769

PS : Pls loot at clear when tick an answer

Is there any updated ? can any one send me the latest file my email is khoa.trinh@hotmail.com

Thanks for your help

please i need the updated dump too. my email is olatufu@gmail.com. i am writing the exam in next week. thanks

I passed on last Friday 29th with 815.

Sorry! Forgot to include an email address. Send the PDF to jmk.mb02@Hotmail.com and I'll work on converting the file to VCE for everyone.

Could someone send me the PDF that being mentioned. I would be more than happy to convert it to VCE.

I'm planning on taking this test in the next few weeks.

Just passed it with 8XX. Dump is valid.

The dump is still valid.

Regards!

Does anyone send me the guide.pdf please. I will pass the exam tomorrow... I have corrected some questions, but I still have some doubt on few questions.
Please sent it to my mail nolwenfr@hotmail.com

Passed-8xx
All questions from this dump - compare the answers with comments from the other guys an read the technet

Bad Dump ---> Failed!!!!

Hi everybody, today I've been passed with 815. This guide works and rocks! :)

Hi All,

Please send me the pdf finder1947@yahoo.com, why people not updating the dump.

Please share the download link Mo-Dee, wanna take the exam ASAP

Passed - 8xx
All Questions from this dump.
Compare the answers from the dump with the comments from the other guys here.
Read the technet.

What pdf mo-dee?

@Mo-Dee

What PDF are you talking about?

Plz upload and/or post link.

Thanks.

Passed with a score of 814. I suggest using TechNet to verify answers and also read the posts from previous testers.

Passed with 814. I suggest verifying answers using TechNet and reading posts by previous testers.

Hey guys
i've passed with 769 today,thanks to Mike's dump and the PDF i was using,go to Technet website you will get the correct answers and download that PDF and do some research before you write but i think if it wasn't for the PDF i was using i was going to fail bcoz that dump it is 70% valid,make sure you know all of the answers becoz you will fail (hardluck to the german guys,dont loose hope,just use that PDF while you are still on fire)..wish you all the best guys cheerz!!

You can convert the PDF file into VCE format using Visual Cert Exam Designer

This dump suckz.
Failed 5xx

Hello Isa,

One of the answer is missing in the dump for Mixed Questions 17. Here's the full list of answers:

A. Create a UM hunt group.
B. Create a UM IP gateway.
C. Configure the IP-PBX to route calls to EX3 and EX4
D. Configure the IP-PBX to route calls to EX1 and EX2.
E. Assign EX1 and EX2 to UMPlan1.
F. Assign EX3 and EX4 to UMPlan1.
Answer: A,B,C

You can check :
http://www.itexamfox.com/news/MCSE70-342Exam.html
http://www.24article.com/Microsoft-70-342-free-dumps.html
http://exam.itexamfox.com/70-342.pdf

For everyone who is failing the exam using just the answers from the dump you need to research each question to verify the answer. It has been stated numerous times on this forum that some of the answers in this dump are not correct but the questions are 100% valid. If you memorize the dump and take the exam you will probably fail. Spend the time to research the answers as all the information and explanations to answers is found on Microsoft TechNet. I was scheduled to take my exam 3 weeks ago but after reading user posts to this forum I postponed it and went and researched the questions to verify answers. I feel confident I will pass the exam first time through because I took the time to understand the questions and researched the topics instead of memorizing and repeating wrong answers. I'm just saying though.

Mixed Questions 17 - The answer is ACE

Configure IP-PBX to route calls to EX1 and EX2
Create a UM IP Gateway
Configure IP-PBX to route calls to EX3 and EX4

Reason:
A Unified Messaging (UM) IP gateway represents a physical Voice over IP (VoIP) gateway, IP Private Branch eXchange (PBX), or session border controller (SBC) hardware device. Before a VoIP gateway, IP PBX, or SBC can be used to answer incoming calls and send outgoing calls for voice mail users, a UM IP gateway must be created in the directory service.

http://technet.microsoft.com/en-us/library/bb123890(v=exchg.150).aspx

The question states that you need to ensure that all voicemail sent to existing extension (Telephone Extension Dial Plan) of a user is delivered to the user's mailbox.

Microsoft TechNet States:

You can add Client Access and Mailbox servers to SIP URI dial plans. Client Access and Mailbox servers CAN'T be associated with Telephone Extension or E.164 dial plans, but the servers will answer all incoming calls.

http://technet.microsoft.com/en-us/library/aa996399(v=exchg.150).aspx

Bad Dump, all questions ok, but many answers are not valid.

Dump is not valid, fails with 568...

ATTENTION, Dump is notvalid! Fails with 574!

BAD dump --- failed 6xx

This dump ist defenetly not correct.
Failed

Still valid 100% same question
passed 769

hello friends any good news about this dump ,,,, i want to do the exam next week

NOT Valid.
To many fault questions!!!

pass 769 dump is valid no new questions

I passed with score 769 . this damp is valid .

hallo everyone.
new mixed Q 2 :
i think that the last answer should be " a journal role" becuse role policy can be assign only for user mangment and not for administrative managment.

contoso Q 8 : im nut sure that this is the right answer. becuse i have to type " new federation trust" to create a trust. i can pipe it in after the "get-exchangecertificate, but i dont think that what thay mean.
mixed Q 17 :i think that the answer is A B C . pbx route to CAS SERVER that hold the UM GATEWAY and the mail box server assign to the DIAL PLAN.

suggestions anyone?

Claut from Italy - Oct 16 2013, 7:57 Wrote:
"
My score regarding UM was 100% so the solution proposed by me about Proseware Q 4 and by Gerry was correct for sure
Box 1: Install the French UM Language Pack on the Servers in the French office.
Box 2: Create a dial plan named ContosoFrance.
Box 3: Create a UM Hunt Group.
Box 4: Create a UM Auto Attendant named ContosoFranceAA.
Box 5: Assign the ContosoFrance Dial Plan to the users in the France office.
"
It was the same for me. I wrote this order and my UM score was 100%.

Anyway, there are many wrong answers in this dump. I have no new questions at all, but my score was 700. So I passed :-)

A few questions had different wording, and the answers' order was changed many times.

Thanks for the dump and for the comments!!!!

Passed today 7xx
dump is vaild take care some answers are not vaild check the correction of the other members in the comment they've corrected some questions.good luck

I pass today with score 796 . this damp is valid .

Hi Janay,
Can you share with us what answers you used ?

passed today with 920, many incorrect answers.
i used this dump and passguide 115q dump.

Passed today 743 dump not valid 100%

Passed the exam 7XX, tricky. Questions are valid.

Passed yesterday. Dump valid but many incorrect answers

Passes today with 723. Some mew questions and lot of wrong answers. Dump not 100% valid anymore. But with technet and answers of the other guys and some knowledge, you can pass it.

Passed the exam 7XX, tricky. Questions are valid.

Mixed Q48 - I think these are the different answers available (found in links below, but they float between 1 and 3). I think 3 due to reasons by answer.
http://www.mcseanswers.com/latest-mcse-70-342-real-exam-download-mixed-part-02.html
http://actualcram.examsquestions.com/70-342-training-cert-certification-practice-study/
1. Set-PublicFolderMailbox
Command didn't exist in my Exchange 2013 cmdlets)
2. Merge-PublicFolderMailbox.ps1
3. Split-PublicFolderMailbox.ps1
"Splits the given public folder mailbox based on the size of the folders" - http://justaucguy.wordpress.com/2012/10/18/exchange-server-2013-preview-scripts/)
4. New-PublicFolderMigrationRequest
5. Set-MailPublicFolder
Didn't see any ability to move/split - http://technet.microsoft.com/en-us/library/bb123707(v=exchg.150).aspx)

I agree with Some IT Chick from United States on:
New Q15 - DF She negates the client being Outlook 2007 forcing a directory sync.

I agree with satchmo/Australia & Anonymous/Unknown
Fabrikam Q6 - Uncheck Export (Save as) for Anyone (since it's to prevent users, the Anyone export seems more applicable)

New Q8's answer looked like a typo, I agree with it though (C only). The command should be Set-FederationTrust - http://technet.microsoft.com/en-us/library/aa997231(v=exchg.150).aspx

Prosware Q4 & Mixed Q10 - Claut/Italy seems certain (see his post 16 Oct)

Here are my thoughts/corrections based on everyonne's comments and my own checking after (or feeling comfortable with their links/reasoning).

I agree with Anonymous/Unknown 8 Aug, I don't really understand why to use Set-MailboxTransportService (checked options, read explanation and still don't see why):
New Q12 - CE (original AC) According to this link you need to implement a hub site (using Set-ADSite), in absence of that as an answer I think E is the best option - http://technet.microsoft.com/en-us/library/jj916681(v=exchg.150).aspx
Anyone agree/disagree?

Jeff/Bahrain's reference to Mixed Q16
Mixed Q16 - CE this is only due to other references on the Internet that excluded AD RMS Cluster as an answer, this seemed the consensus.
Can anyone help reinforce this?

I agree with Claut from Italy on:
Prosware Q9 - B http://technet.microsoft.com/en-us/library/jj674302(v=exchg.150).aspx
Mixed Q42 - ABCD http://technet.microsoft.com/en-us/library/dd297955%28v=exchg.150%29.aspx (URL from Mike, link reinforces Claut's conclusion)

Passed Yesterday with 798

2-3 new question

I have changed some answer
Proseware Q9
B - Because I dont have to create custom mail tip, I have to enable Mail Tip for large audience, so I nedd to enable the tips and force generation

Set-MailboxServer MBX1 -GroupMetricsGenerationEnabled $true
Set-MailboxServer MBX1 -GroupMetricsGenerationTime 23:30

Now in Exchange 2013 I can create retention TAG also for Calendar, Tasks and Notes so I changed the answer MIXED QUESTION QUESTION 42 in
A, B, C, D
the support for Calendar and Notes was introduced by ex 2010 SP2 Rollup update 4

MIXED QUESTION QUESTION Exam F, Q48
In the exam the option New-PublicFolderMoveRequest was replaced by
something like split-PublicFolderProcedure.ps1
so I think the the correct answer was Set-MailPublicFolder because you can leverage on the auto splitting feature on modern public folders

Proseware Q 4
You can't create a UMAutoAttendant before create a dial plan, so I have changed the torder of the first two box
1. New-UMDialPlan -Name ProsewareUMDialPlan .
2. New UMAutoAttendant -Name ProsewareAA .


My score regarding UM was 100% so the solution proposed by me about Proseware Q 4 and by Gerry was correct for sure
Box 1: Install the French UM Language Pack on the Servers in the French office.
Box 2: Create a dial plan named ContosoFrance.
Box 3: Create a UM Hunt Group.
Box 4: Create a UM Auto Attendant named ContosoFranceAA.
Box 5: Assign the ContosoFrance Dial Plan to the users in the France office.

Passed with 742 today. About 5 new questions. Dump questions still valid. Verify answers in this dump.

failed with 682.
Dump seems to be still valid.
answers hardly mixed. Some new Answers in case studys

NewQuestion 15: Provide A. Datum Users Free/Busy of Contoso.

When you create an organization relationship with an external federated Exchange organization, users in the external organization can access your users' calendar free/busy information. No replication of GAL information is required. With this configuration in place, Outlook 2010 and Office Outlook Web App users can simply enter the SMTP address of an external recipient when scheduling meetings.
When creating an organization relationship, you can specify one of the following three levels of calendar availability access:
No free/busy access
Free/busy access with time only
Free/busy access with time, plus subject and location
For users in your organization to have access to external users' free/busy information or to allow for one-way sharing of their free/busy information with the external organization, the administrator in the external organization must also create an organization relationship with your organization. However, the external administrator can specify a different level of access for their users that's different from the level you specified. In a one-way sharing example, the external administrator would configure their organization relationship so that their users' free/busy information isn't shared with users in your organization, but the free/busy information for your users would be visible to the users in the external organization based on your organization relationship settings.
http://technet.microsoft.com/en-us/library/dd638083(v=exchg.150).aspx
Answer: Contoso - create Org Relationship; Datum, create Org Relationship

Passed today, all question from this dump 7xx

Lot of answer are wrong but the question are OK.

failed today, only scored 662
All questions from this dump

Passed with 746.

Passed today, 7xx.
Few changed questions, but some answers in dump are also wrong.

For the France or German Dial plan I'm thinking its suppose to be:
Box 1: Install the French UM Language Pack on the Servers in the French office.
Box 2: Create a dial plan named ContosoFrance.
Box 3: Create a UM Hunt Group.
Box 4: Create a UM Auto Attendant named ContosoFranceAA.
Box 5: Assign the ContosoFrance Dial Plan to the users in the France office.

Any thoughts?

Passed today with 7xx. All question from dump, but some wrong answers.

Saleem from Unknown - Oct 03 2013, 2:30 AM
Comments are emotive and I would not trust these comments. It appears that people can pass this exam with this dump but some corrections are necessary

Failed ,Please do not follow this dum,wrong answers of so many question,even you select right answer as per dump but still get fail,please do not trust on this dump,

When assigning a different language to a dialplan.

Is the first thing you need to do Create Dialplan or first download and install the language pack ?

No new q.
8++

Passed 7xx . 2 New Question TQ

Marks from India.

I agree and I have changed my answer to A C D

Passed today 7xx. No new q.

Passed today 7xx, all questions from this dump but wrong answer.

Passed today 7XX lot of bad answer in dump 100% of my answers from dump. 2 news questions.

Can somebody verify with me
[MIXED QUESTIONS QUESTION 42]

answer it should be ACD
according to
http://technet.microsoft.com/en-us/library/dd297955%28v=exchg.150%29.aspx

Failed 28.09 Score 682 No new q, but hard mix answers in questions with new variants. A lot of bad answers in the dump.

Passed with 7xx on 28th sept

Passed today in Mexico with 769. No new questions.

Passed today in Spain with 792
No new questions. Due this, I think that there are several answer bad.
The 95% that my answers are the same that the last drump
But, valid for Spain

OTHER COMMENTS
1) MIXED QUESTIONS 30 AND 48.
As per previous post. Duplicate question, different options and in a different order. Same correct answer.
2) TREY RESEARCH Q 10
ANSWER APPEARS OK

NEED TO DEFINE A NEW MANAGEMENT ROLE GROUP FOR THE USERS IN THE LEGAL DEPARTMENT
ADD MANAGEMENT ROLE ENTRIES TO THIS GROUP TO ALLOCATE THE DESIRED PERMISSIONS TO THIS ROLE GROUP (I.E USE EDISCOVERY)

ONLY 2 STEPS ASKED FOR IN THIS QUESTION, SO CHOOSE THE ABOVE TWO STEPS.

IDEALLY THE 3RD STEP WOULD BE TO USE NEW-MANAGEMENTROLE ASSIGNMENT TO LINK THE ROLE GROUP AND THE ROLE ENTRIES.
THIS 3RD STEP WOULD SATISFY THE REQUIREMENTS OF THE QUESTION BUT ONLY 2 OPTIONS REQUIRED IN THIS QUESTION WHICH DO NOT SEEM TO
ANSWER THE QUESTION APPROPRIATELY

Listing as requested of questions that I believe to be incorrect.

1) NEW QUESTIONS Q 15
Reasons mentioned in previous post

2) NEW QUESTIONS Q 1
Reasons mentioned in previous post

3) [FABRIKAM Q 6]
ORIGINAL ANSWER WAS UNCHECK OWNER EXPORT (SAVE AS)
CHANGED TO UNCHECK ANYONE EXPORT (SAVE AS)

THIS NOW PREVENTS ANYONE OTHER THAN THE OWNER OF EXPORTING THE EMAIL MESSAGE IN A DIFFERENT FORMAT.

In agreement with :
Anonymous from Unknown - Aug 17 2013, 6:52 PM Report Spam
Fabrikam Q6:
The suggested answer is to uncheck Owner Export (Save AS). Shouldn't this be Anyone Export (Save As)

4) NEW QUESTIONS Q 15]

ORIGINAL ANSWER WAS B C
ANSWER IS EITHER B C OR A E
CHANGED TO A E AS CONTOSO.COM IS THE COMPANY WHICH IS SHARING THE FREE/BUSY INFORMATION

IT APPEARS THAT THE DIRECTORY SYNCHRONIZATION IS NECESSARY SO THAT CHANGES TO ACTIVE DIRECTORY CAN BE AUTOMATICALLY SYNCHRONIZED TO THE EXCHANGE SERVER MAIL ACCOUNTS
USE A SHARING POLICY RATHER THAN AN ORGANIZATION RELATIONSHIP BECAUSE MORE FREE/BUSY INFORMATION CAN BE ALLOWED BETWEEN THE 2 FEDERATED DOMAIN ORGANIZATIONS -
SHARING OF CALENDAR FOLDERS AND CONTACTS FOR INSTANCE.
AN ORGANIZATION RELATIONSHIP SHARES FREE/BUSY INFORMATION TWO-WAY NOT ONE-WAY.
TWO-WAY SHARING OF FREE/BUSY CALENDAR INFORMATION HAS NOT BEEN SPECIFIED IN THIS QUESTION

I passed Sept 20, but only 7xx so there are a few wrong questions.

Satchmo- Do you have a list of all the questions corrected?

I failed last monday with 682.

I changed the following answers :

1) NEW QUESTIONS Q 15
Sharing is done by Contoso.com not A.Datum.
Sharing has to be provided one-way not two-way hence no need to use an Organization Relationship.
Changed B C to A E

2) NEW QUESTIONS Q 1
ORIGINAL ANSWER WAS
THE SENDER IS....
THE RECIPIENT IS.....

CHANGED TO
THE SENDER IS A MEMBER OF.....
THE RECIPIENT IS A MEMBER OF...

AS THE QUESTION IS REFERRING TO GROUPS NOT INDIVIDUALS

3) MIXED QUESTIONS 30 AND 48
DUPLICATE QUESTION
MIXED QUESTIONS QUESTION 30 AND QUESTION 48 ARE THE IDENTICAL QUESTION BUT WITH SLIGHTLY DIFFERENT OPTIONS
BOTH ANSWERS ARE CORRECT THOUGH
NEW-PUBLICFOLDERMOVEREQUEST

In response to my previous comments :

Links are :
http://ficility.net/2013/02/08/exchange-federation-trust-part-1/
Organization Relationship connects 2 Exchange organizations and allow them to share data defined by Sharing policies.

http://bjornhouben.wordpress.com/2013/08/09/microsoft-exchange-2013-exam-preparation-notes-for-70-341-and-70-342/

Additionally for NEW QUESTIONS Q 15

RESOURCES ARE BEING ACCESSED AT CONTOSO.COM BY A.DATUM USERS BUT SHARING OF CALENDAR INFORMATION IS ONE-WAY NOT TWO-WAY.

PROBABLY NEED TO DEFINE AN ORGANIZATION RELATIONSHIP IF SHARING RESOURCES TWO-WAY NOT ONE-WAY.

http://www.examcollection.com/microsoft/Microsoft.PracticeTest.70-342.v2013-08-10.by.Mike.116q.vce.file.html

http://ficility.net/2013/02/08/exchange-federation-trust-part-1/

Don't agree with Vladmir from Russia....

1) MIXED QUESTIONS 30 AND 48
DUPLICATE QUESTION
MIXED QUESTIONS QUESTION 30 AND QUESTION 48 ARE THE IDENTICAL QUESTION BUT WITH SLIGHTLY DIFFERENT OPTIONS
BOTH ANSWERS ARE NEW-PUBLICFOLDERMOVEREQUEST

2) antonio from Spain - Sep 02 2013, 1:07 PM Report Spam
20 NEW MIXED QUESTIONS

question I think question talk about groups and answer is :

the sender is a member of
the recipient is a member of

what do you you think?
I agree. The question refers to groups.

3) [P4S NEW QUESTIONS Q 15]
You need to recommend which tasks must be performed to ensure that the A. Datum Users
can see the Free/Busy Information of the Contoso Users.

IT APPEARS THAT THE DIRECTORY SYNCHRONIZATION IS NECESSARY SO THAT CHANGES TO ACTIVE DIRECTORY CAN BE AUTOMATICALLY SYNCHRONIZED TO THE EXCHANGE SERVER MAIL ACCOUNTS

USE A SHARING POLICY RATHER THAN AN ORGANIZATION RELATIONSHIP BECAUSE MORE FREE/BUSY INFORMATION CAN BE ALLOWED BETWEEN THE 2 FEDERATED DOMAIN ORGANIZATIONS
SHARING OF CALENDAR FOLDERS AND CONTACTS FOR INSTANCE ALTHOUGH IT SEEMS MORE CUMBERSOME THAN UTILISING AN ORGANIZATION RELATIONSHIP
RESOURCES ARE BEING ACCESSED AT CONTOSO.COM BY A.DATUM USERS

WHY NOT USE AD SYNC AND SHARING IN THE CONTOSO.COM DOMAIN RATHER THAN THE SUPPLIED ANSWER OF A.DATUM.
NOT SURE THAT THIS ANSWER IS CORRECT

Fail today 6XX, most question in dump but bad answer.

got passed today 7xx.

Passed today with 7xx. Some answers are wrong . No new questions

Passed today in California with 763. Obviously some answers wrong. Enough to pass though, every question was from this test.

Test passed today with 723, all questions in the test, some wrong answer but enough for pass with success ;)

pass today 7xx plus . but some answer are wrong here..

Passed last week and no new questions. Thanks guys!

Passed today with score of 815. Dump 100% valid. No new questions. Thank you Mike for the great work.

Antonio, I totally agree with you

20 NEW MIXED QUESTIONS

question 1 i think question talk about groups and answer is :

the sender is a member of
the recipient is a emmber of

what do you you think?

Thanks, Passed today and no new question.

Thanxxx . Valid dumb, passed today with 7** score .
Mixed Q 16 : didnt had the option of The AD RMS Cluster !

Hey Doc, here's on the Mailbox Audit Logging:
http://technet.microsoft.com/en-us/library/ff459237%28v=exchg.150%29.aspx

Hello All,

I have a question. On the -AuditAdmin sections, There are options for FolderBind, MessageBind, Update, Create. Is there a link to that explains the difference. I mean create is obviously new email, move is moving email within folders. Do you know what they mean by Update? FolderBind? MessageBind? Thanks again all.

Passed with 769 using this dump, thank you for your effort Mike! All questions are 100% valid in The Netherlands, BUT not all answers are correct!! Also 2 questions don't have the same set of answers as in this dump:

49 mixed questions 48
20 mixed questions Q8

So I urge you all to at least learn everything to know about these 2 questions so you are able to find the answer and for all the other questions, try to find out if the correct answer is really the right one (if you are not already doing this).

Thanks again though for your effort Mike!

Good dump! Pass today. Score 792

Good work! I Think "Mixed 8 of Q20" Options are change.

Just passed with score 770. This dump is valid.

from thailand

Just passed with score 885. This dump is 100% valid. All questions were from the dump. NO NEW QUESTIONS at all.
Thank you Mike.

Dump still valid - around 90%. A few new questions and some tricky wording - but you should pass if you memorize this.

Not valid.. failed 654

dump is 100% valid, passed

I second that roy, Thanks so much mike. Now i will need to wait for a dump for 341 and will have the MCSE: Messaging

Thank you very much Mike for creating this dump and helping me and others pass the exam. Your work is greatly appriciated.

Just passed with score 9xx. This dump is 100% VALID. ALL QUESTIONS on the exam are from the dump. Answered as per this dump. If you cannot pass the exam using this dump, you cannot pass any exam at all.

new questions Q12.
Why running the Set-mailboxtransportservice cmdlet? This cmdlet configures logs and limits for the transport.

Thanks for the help.

Passed today the dump is valid but be aware of wording being reword and 4 to 5 new question, their is some wrong answer beware.

this dump is valid

this dump is valid go and write 7xx

passed with 815. Thanks Mike.. The dump is very much valid

I have an exam booked tomorrow at noon.

7xx is very risky! many new questions that are not the Mike dump?

Thank you, Mike. Passed today. 769/1000

just passed this exam usig this dump.

I scored 769.

The dump is valid.

Thank you very much Mike for a great job done on this dump.

Just passed with score 720, used this dump and TechNet website

Passed with 792. Good to go.

Hi all,
Just passed it today . the dump is 90-100% valid.
no surprises , if you know this dump you are good to go.
good luck everyone

thank you Mike for this great work

Fabrikam Q6:
The suggested answer is to uncheck Owner Export (Save AS). Shouldn't this be Anonyme Export (Save As)
Fabrikam Q5:
Both override rules should be disabled, as the requirement is: Block all PII data and financial data withour exeption.

Just passed with score 900. Dump 100% valid. All questions from the dump. Thank you so much Mike.

Passed 8xx
Many Thanks

Congratulations Robin!

Joey,

In your opinion what is the best answer on Mix Q.13 according the answer options available to choose from for the question?

Joey,

With respect to proseware Q.4 according to the link below the high level configuration order is as follow:
http://technet.microsoft.com/en-us/library/jj673564(v=exchg.150).aspx

Create and configure UM components:

Step 1: Create and configure UM dial plans
Step 2: Create and configure your UM IP gateways
Step 3: Create and configure your UM hunt groups (optional)
Step 4: Create and configure a UM mailbox policy
Step 5: Create and configure UM auto attendants (optional)

Conclusion:
Create and configure UM Dial Plan is # 1

Thanks Mike for uploading the new dumps . Passed today with score 883 . Prepared with just your dumps

I knew there's a "similar" question in new session. But they are totally different.unless..there is a typo.

The new Q3 and mix Q13 are in different situation. I'll mark the different in " "

New Q3 :
Policy requires that all eamil messages remain stored for "two" years
"Tag2" permanently deletes the email messages after "two" years
The solution must ensure that all email messages that are older than "two" years are removed as quickly as possible

**The answer is correct as activating the Folder Assistance will clean up email older the two years


Mix Q13:
requires that all messages remain stored for "three" years
Ret2 permanently deletes the email message after "three" years
The solution must ensure that all email messages that are older than "two" years are removed as quickly as possible.

**The answer is not correct as activating the Folder Assistance clean up email older the "three" years only which does not meet the requirement

Hi Joey,

1. Q. 3 New Questions Section and Q. 13 Mixed Questions are the same, they just have different answer options. I do agreed with "SearchQuery" and "DeleteContent" part that must be involved, the problem is "DeleteContent" is not a choice, yes "Run the Search-Mailbox cmdlet" is a choice, but not "DeleteContent", so again if you look both questions you see that the answer choices available to choose from are not offering "DeleteContent" Q. 13 has answer option "Run the Search-Mailbox cmdlet" but "DeleteContent" is not an option and the answers of Q. 3 are not offering either "DeleteContent" or "Run the Search-Mailbox cmdlet"

Hi Mike, I have questions about Proseware Q4.

The first is "New-UMAutoAttendant -Name ProsewareAA -UMDialPlan ProsewareUMDialPlan..". But ar.Is it possible to create the AutoAttendant before a DialPlan associated to it is created?

Thx Mike. Your dump is much comfortable!!! Lot's of correction.

But for the Mixed Questions Q13.

Ret2 permanently deletes the email messages after three years was created. Your answer won't meet the requirement "email messages that are older than two years are removed as quickly as possible".

I think the "Search-Mailbox" with the parameters "SearchQuery" and "DeleteContent" must be involved in the answer.

Well done Mike! Thanks!

Thanks Mike! Nice work!