Pass Your Microsoft 70-466 Exam Easy!

i passed this exam with 7XX dumps is valid

Canada.
I passed with 8XX marks.
The Dumps are valid.

any update?

Wrote and failed, Case studies messed me up. Any chance anyone has any info on them? any help is much appreciated.

just passed the exam today.the set still vaild, there are over 50% question from it

is this vce valid?

Got 8xx marks today. dumps still valid

Hello, if anyone has pdf version relevant for 2014 additions as well please email to tshegofatsom4@gmail.com thank you, writing exam next tuesday

I have this dump and another one, few answers are different for the same question. I will do the test in a couple days and I dont feel good about it.
I think this is outdated

Anybody knows which tool should I use for opening this .vce?

Tks,
Andrés

Anybody knows where can I get the software for viewing / converting this vce file?
Thanks in advance,
Andrés

Can anyone please confirm these dumps are still valid??

Hey Guys
I've passed with over 900 with the vce dumps LONNIE and with Testking.
What aleshakeys said is right.
Lot of darg and drop questions.

Guys LONNIE dumps is very valid with 173q.vce, did my today with 899, its contain the 2 casestudy that came out.Tailspin first with 5 question then contoso with 6 questions rest of the exam 35 questions, All 46 question,Good luck.

is this vce valid?

This 94q vce dumps are not valid at all, many new questions changed, anyone please share the valid 70-466 186q exam questions, thanks a lot.

Does anyone have an up to date vce for this exam? If not, does anyone know if the premium exams on here are any good? I don't mind paying if the files are legit. Chuck

Could somebody please tell me where can I find that file Ken is speaking about? None of the dumps here seem to have 193q. Thank you!

Hi alls, just passed this exam today with 900+ marks. 20-25 new question not in here but you can find out these new ones from 70-466 193 Q&As vce, study the new question before the exam.

retook the exam and passed, must say the I managed to download all three case studies from the internet(1 from itexamfox and another from researchgate), most questions were still the same as the first exam but this time I had a lot of drag and drops from this dump. On the previous exam I only had 2 drag and drops whereas on this exam I had more than five. All the best to those that r still going to write

Hi All, aslo failed on 7 Nov, the case studies were the biggest problem, can anyone please share again

just took the exam and failed. not valid

Just passed the exam today.
The dump is around 60% valid.
However, there were three case studies that are not included in this dump.
Thanks BesLoi for sharing the case studies. They were really helpful.

took the test today. The dump is 50% valid. The case studies are also very much Valid. All the best!!!

Got 8XX marks, valid 50%. As mentioned in previous comments, there are 3 case studies. I have uploaded 2 of case studies for 70-466 at below location:

https://docs.google.com/file/d/0BxGkFpg2g4FyTThyWW0xc1hqcG8/edit

Please approve this comment so others can be benifit

I have just finished the test and was really shocked to sit this test

The exam is broken up into 4 parts - which may appear in random order. 3 of them are case studies (4-6 questions each) and 1 normal part (49 questions). Once you complete a part you cannot go back to change your answers. This is bad as sometimes you can get a clue to correct an earlier answers from later questions

The questions for normal part is covered 50% in the dump, the other 50% is completely new. However if you finish the dump with understanding, the other 50% is not a big deal (though still a pain and you need to brainstorm a bit).

The case studies are a pain. This is completely new. For each case studies there is a screen with different sheets such as about the business, technical requirements, business requirement, security requirements...

Reading only the case studies take 10 -15 minutes per case study already, then the questions coming in as another pain. There are a lot details in the case study not to be asked in the question, and many questions covered a very tiny piece of information in the case study that we can miss very easily.

For example, a company has two SSAS instances one for multidimensional cube for report, and one for tabular used for ad-hoc analysis. There is a question that a user want to do an analysis on a DOD basis (day over day). There are 4 options - two for multidimensional and two for tabular. The case study database diagram has no date dimension, so the choice of using dimension wizard (dimensional approach) to create a date table seems to be correct. However, DOD is mentioned in the SSAS tabular requirement [trust me - open wide eyes to find this piece of info] and thus the correct option must be mark a table as date (even though there is no date table yet) together with a DAX fomula.

There are some question asking about what kind of authentication is to be used for data source of a report - need to read more and make sure you understand and know when to use each kind and link it to the scenario of the case study to know what is the best to choose.

There is a question about user permission to run and subscribe a report on sharepoint server. The multiple choice include view report, create alert and manage alert and other edit and manage permission. Not sure if the create alert mean the subscription or not, so I can only select view report. I may lose marks on this.

Another question about an aggregate function to know which runner is the fastest based on running time. I was really so dump to select MAX. During the commenting period i realise it should be MIN as the running time should be the smallest. this question not clear as they one the name of the runner as well - with cannot be achieve by using only MIN. Maybe firstchildof but i am not sure how to put them all together

Another question about deploying SSAS using command line. There are four options and we can choose more than 1. The options are 1) use SSAS deployment wizard to generate XMLA 2) use SSAS deployment wizard to generate MDX 3) deploy using SQL server data tool 4) use SSAS deployment unity to generate XMLS. I select 1 and 4 and still not sure if correct or not.

Knowledge about partition processing mode (MOLAP ROLAP etc) and processing group is required.

Passed with a bit more than 700 - the most happy moment i ever have for 4 exams so far

good luck! :)

Failed with 665. This dump is valid only in about 25%

Passed, still valid! For case studies I looked into exam sample questions (e.g. itexamfox's older samples pdf) and I found 2 out of the 3.

Is there a chance that someone with access to the oft-mentioned itexamfox dump could upload it here? Or if they don't have a VCE file, then share what they have in some other way and link to it here? It would be most appreciated.

Please confirm is this valid or not?

***70-466 EXAM UPDATES IN APR. 24 2014*** BE CAREFUL! Please see details in - http://borntolearn.mslearn.net/btl/b/weblog/archive/2014/03/10/certification-update-sql-server-2014.aspx

This Dumps valid in India? Please respond

Passed with 850/1000 in Singapore. This dump is valid, however, there are about 18 new questions and 2 case studies that are not in this dump. Each case studies consist of 6 questions. Total questions is 77. Passing score is 700. Good luck!

Anybody? Any help/confirmations would be appreciated.

Can somebody explain to me the following?

Q2 - I understand that the answer is H but how is the answer also D? I couldn't find the SortExpression expression property anywhere for the Textbook. Is the answer just H or both D and H?

Q27 - Can anybody confirm this one? I just don't get how the answer would help.

Q28 - I don't agree with this answer (N). I think it should be M (aggregating the
measure along the time dimension). Anybody agree with me?

Q41 -Although I agree that both B and F are right, the question says "Each answer presents a complete solution" and F (Place the distinct count measures in separate measure groups) is not a complete answer even though it's right because it doesn't mention the Sum part of the question. Any thoughts on this?

Test 2 - Q17 and Q19 are the same but the answer to Q17 is right because you need to link a measure group and not a dimension. Can I get a confirmation for this?

Cleared today, 3/14/2014 with 803 score.

There were total 77 questions, around 17 were out of this dump.

There were 2 case studies related to SSRS, 6 questions each. The case studies did not focused on SSRS development, rather configuration and administration of SSRS and deployment.

Passed 867 (mar/12/2014), still valid on Brazil - scenario case student questions is not on this dump. last 20 normal questions isn't too, but if you have some experience, trust this

Passed the 07/03/2014 with 866.
2 case of study and 65 question. 40 questions were the same of the test. Lot of questions were on Tabular

Has anyone written the exam in March? is it still valid? Exam suppose to have updated from march.

Before any further thaks all you folks. Passed 830.
Dump still valid but you have to be aware of the correction in the comments.
Dump miss 2 study cases (6 questions each) and there are like 15 new questions in the exam

60% of the questions are in the dump. Lot of SSRS questions.

By far the best brain dump I have come across for this exam with the most up to date content! Many Thanks

Passed 850. Approx. 50 Questions were from this dump. 2Case studies(with 6 questions each) and other new questions. Very detailed SSRS questions

Great job by Max on this dumps. The exam contains up to 60% questions from this dumps. Passed the exam successfully.

Passed 800. 50Questions were from this dump. 2Case studies(with 6 questions each) and other new questions.

Is this dump still valid?

Passed today with 802. The exam has only 50% questions from this dump and two case studies. I would strongly recommend to look into SSAS and SSRS before taking the exam.

passed today successfully. were 77 questions , 50 are from this dump. thanks a lot to dump author and all people from this forum for their suggestions.

Is the dump still valid? Why does t take long for comments to show up?

Is this dump still valid ? Anyone have a update on the dump please.

i want to prepare myself very well for this exam, apart from this vce, which books should i read before i do this exam thanks a lot for your help

Hi, I just would like to inform you that 50% in the actual exam are new and this dump show only 40-50% questions in the actual exam which I have take last Jan 9, 2014. Be careful...

Q28 I'm not agree with proposed solution:
(N) - Add a measure that uses the Count aggregate function to an existing measure group.
I think the correct answer is:
(M) - Add a hidden Sum aggregate function. Add a calculated measure aggregating the measure along the time dimension.
Cam someone advice please ?

pass with 960. All questions are valid.

I am planning to take the exam using this dump is it valid till Jan 30 2014 ?

This questions are still valid. I passed it with 947... lolz

Great dump. Still valid. I passed 8XX

is it still valid for Russia?

Anybody knows if the file is good also today? the last ok was from Andy the 11st nov...Help me!! kevinamassetti@libero.it

Hì Guys, Thanks Andy, you are the last one to pass the exam? The 11st Nov? Is Anybody know if are good also today? Thanks all, bye, Raff

Hi,
i prepared myself with this vce and i'll do the exam tommorow morning. all of you wrote this questions are still valid.
but there are 2 newer vce-files? with a lot of new questions.
you learned them too?
nobody did a comment to the newer files?

A.
In Drag-Drop question 17 and 19 have different answer to one question:
IN SSAS cube "You need to reuse a measure group from a different database."
The third step:
Answer 1: "From the Select object step, select the measure group and the dimensions that you need to link"
or
Answer 2: "From the Select object step, select ONLY the measure group that you need to link"
What is correct?

B.
In Drag-Drop question 6: "You need to disable the Fiscal hierarchy in the Operations cube without impacting other database objects."
The third step answer is: "In the Properties window, set the ENABLED property to False"
but I think the correct answer VISIBLE propertiy: "In the Properties window, set the VISIBLE property to False"
What do you think on this?

Thanks in advance!

Dump is valid, scored 921. I got quite a lot of drag and drop questions that weren't in the dump though. Almost all of them were SSAS MD questions.

Exam passed with 960 score !! The dump still valid
Many thanks

Great dump. Still valid. I passed 8XX on the 29th. Please let us know for the next one 70-467

Dumps are still valid. passed with 817 marks
Thanks max:)

its still Valid, I passed my exam with 98% on Friday (25 October 2013).

Passed 95%
Answers for Walid:
Q62 : D - Matrix is correct (B-Line option is not avaiabled in real test)
Q21/Q64: I think question is asking about storing as 2 decimal. So, I Answered calculated col.
Q23: I think DistinctCount is correct (I did not got this question exam)

Any comments about my last three questisons ?! I'm not sure about the answers given !!

Q62 :
You are designing a SQL Server Reporting Services (SSRS) report that sources data from a SQL Azure database.
You need to design the report to show the sum of sales.
The sales must be grouped by region on the rows and year on the columns.

Which report item should you add? To answer, select the appropriate setting in the answer area.

The answer given is :
B - Line

I think it should be :
D - Matrix

Q21 - ( Q64 : same question )
You are modifying a SQL Server Analysis Services (SSAS) cube.
Users of the cube report that the precision for the SalesAmount measure is four digits.

You need to ensure that the SalesAmount measure stores values to two digits of precision.
What should you do?

The answer given is :
E - Add a named calculation in the data source view that casts the data source column to two digits of precision. Bind the SalesAmount measure to the new column.

I think it should be :
A - Use the FormatString measure property to format SalesAmount as #,##0.00;-#,##0.00.

I have a doubt about the question Q 23 !!!
Q23 -
You are designing a SQL Server Analysis Services (SSAS) cube.
You need to create a measure to count unique customers.
What should you do?


I'm not sure that the answer given in the dump is correct:
J - Add a measure that uses the LastNonEmpty aggregate function. Use a regular relationship between the time dimension and the measure group.

I think the correct answer is :
I - Add a measure group that has one measure that uses the DistinctCount aggregate function.

pass - still valid

Passed the exam with 947 in India. Thank you very much

I passed exam today Oct 12 with 943 score, Dump still valid, thank Max so much

Did my exam yesterday. Dump still valid.

Passed yesterday with 90, still dump is valid. Thank you very much Krappie and Max

Passed today with 856, dump still valid thank you.

Thanks max for this file, much appreciated!

Yes I used this file to pass the exam the 20th.

Sorry, was in a hurry typing the comment. I meant "max". Did you use this file before taking the exam?

Anonymous Proxy . . . when?

fassssssss

Did you use this vce anonymous proxy?

I just passed the exam with 986.
Thanks to Krappie for the missing schemes! (even if some are still missing..)