Pass Your Microsoft 70-662 Exam Easy!

I just passed the exam this afternoon, 80% of questions are from dump.

Congrats Humpty Dumpty :)
I'll take the exam tomorrow. I think the dump points the right answer for admin delegation. There are predefined administrative roles and you can delegate the using the wizard mentioned in this document :
http://www.msexchange.org/articles/understanding-exchange-access-control-administrative-delegation.html

OK, just got done taking this - passed with 836. About 15 or so new questions not in this, OtherPeoplesPoo, or Fibers dumps. With the questions that I was in doubt with here, I went with my gut and what I thought was the correct answer. If you use Exchange everyday and have done most stuff, you should be ok.

Exam A there is a question: You have a hosted Exchange Org. All servers in the Org have Exchange 2010Sp1 installed. You need to group a set of users for administrative delegatation. What should you create? Answer in dump is D: A new role assignment. I disagree and think it should be B: A new management role. It is not asking to link users to policies its asking to group users together.
http://technet.microsoft.com/en-us/library/dd638105.aspx

Exam E, Q22 says that the answer is A.
But there is not NTLM authentication option for EAS virtual directory authentication, is there? So how could that be the answer?

As for Exam B, Q24,
You are looking for suggestions. I think the answer is C. Check this out :
http://smtp25.blogspot.com/2009/06/text-message-notification-exchange-2010.html

Thanks,
How about Exam E, Q4

Don't we setup relay permissions through recieve connectors? A hub transport rule would work after the mail is accepted. I didn't actually understand the wording in the question :)

@Joe, last thing; it wouldn't be set-mailboxdatabase because the question doesn't say you have multiple databases or mailbox servers.

@ Joe, I think the answer is remove-publicfolder. The Dump references this: http://technet.microsoft.com/en-us/library/dd876883.aspx but the answer doesn't reflect Step 1; the dump just goes to Step 4 as the answer which is remove-publicfolderdatabase. So I think the answer should be B: But that's just my thoughts.

Exam E, Q3

What kind of a question is this? How do we approach to those?

"Server1 holds a public folder database, witch command do you use first to remove the public folder database?"

What if the PFDB is assigned to the mailbox databases?
vce says that correct answer is "Remove-PublicFolderDatabase"
But can anyone verify that the correct answer is as vce suggests, or is it "Set-MailboxDatabe" which is among the options..

Used AnotherInbox, Majd Salha, Fiber, and Binary and got over 930 in the UK a couple of weeks back.

I got fed up with reading duplicate questions with incorrect wording, so put all the exams above together in one file, with the duplicates removed. I also added 6 new questions.

I have uploaded this file and it is called: Microsoft.SurePass.70-662.v2012-07-19.by.OtherPeoples.393q.vce

Please use that one as I know it is 100% valid.

Good luck and a massive thanks to AnotherInbox, Majd Salha, Fiber, and Binary!!

@ Lucas and @Muddywaterz
Thanks for the input - I'm sitting this next Monday and want to double check everything - nobody likes to fail!

Humpty Dumpty. Your answer about exam A, question 2 that refers to Outlook 2003 clients updating to OUtlook 2010, is good, but I think isn't correct, because the question says "You need to remove all of the public folders from Ex1" . To remove only de public folder (not database), you don't need make changes in OAB, only delete Folders in Database.

Another thing would be if the question was "you need to delete the public folder and DATABASE" then you are rigth. I believe that it is a trick question. I have doubts. I do not know what could be

Humpty Dumpty, think the answer in the dump (Exam D Q21) is correct.

See the below link:

http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/050fecb3-206f-4b73-b9be-40b2bae58e23/

Anyone have any thoughts on Exam F the question regarding a Distribution Group named Group 1, and the user named User1 who needs to add/remove members while preventing User1 from modifying all other groups. The answer in the Dump is A:. I think it's D: I've run in to this in production before and adding the user to "Managed By" didn't work. I had to do this: http://blogs.technet.com/b/exchange/archive/2009/11/18/3408844.aspx

Exam D - Question how to disable Public Folders in OWA. The answer in the exam here is A: Use the EMC to create a new OWA Mailbox Policy and what it should be is C: Modify the Segmentation settingsof the OWA Virtual Directory.
http://www.msexchange.org/articles_tutorials/exchange-server-2007/security-message-hygiene/outlook-web-access-security-features-part3.html

I wouldn't trust all these answer are correct - check them. Exam D has a question about ensuring Server1 being able to send and receive email from Server 3 and to ensure Server 3 can get updated Exchange recepients. What ports need opening on the Firewall? It has Inbound and outbound port 25 - I agree with inbound not too sure about the Outbound as by default all traffic is permitted out - but what is definitely incorrect is the LDAPs Port. Answer is port 636 E: and not G:50636.

I passed this exam yesterday with 821. Studied the binary181 and fiber342 (a lot of duplicate Qs through and overlap). All of the Qs on exam where from these two dumps (yet slightly reworded) and around 4-5 new questions that were not too difficult. Several Powershell Qs for CAS/HUB/TRANSPORT and a focus on the ORG or Server level.

I know exchange fairly well, and passed, but for exam prep, I only studied this dump. About 1/2 the questions on test were not I. This dump.

United States
passed with 723. Used this and Fibre. I HIGHLY recommend studying BOTH. I was about to take the test with ONLY this dump, and the day of the test I studied the Fibre one quickly and about 1/3 of the questions were on that one.

One other note - alot of the questions are on here but REWORDED differently OR give the same answer but slightly different wording. So you have to spend time.

I passed today with 823. Exam had 55 questions. I studied this dump and fiber 342 only. There were a few questions not covered in the dumps. You will need to study both to pass. Good luck!

There is a question in Exam A on this dump that refers to Outlook 2003 clients updating to OUtlook 2010 - and what is the first thing to do. The answer in the dump is Delete the Public FOlder DB, but this is wrong. The first thing you should do is change the OAB Distribution Points. If you delete the PFs first (which I doubt Exchange would let you do) you will have loads of issues as Outlook 2003 gets it Free+BUsy etc fromPublic Folders.

hi all,
i have just passed the exam with 823/1000 , i studied the binary181 and fiber 342 i had 6 to 7 new questions. but most of te question where from those two dumps.
thank you

I´m checking this VCE because I failed the test today. The first 3 question I´m looking into, the answers are wrong. This VCE needs an update.

The question where you need to be sure that users create new public folders on server4 only has wrong answers. Someone put the following comment in the answer:

"Mailbox features???"

I´ve got this question today on the exam and the answer is:
Mailbox database. Not mailbox features.

The question where it asks to install the pre-requisites, the answer is wrong to. It doesn´t mention to actually install the roles. Why would the answer be "exchange-typical.xml"?

I´ve done this VCE and I passed the VCE with 100%, but failed the exam today. We need an update..

Failed 692.

15 or 20f news Questions

failed the exam got 682 not all questions are from this dump so dont rely on them

Failed the exam today. Most questions seems to be on this exam but I doubt if there all correct. Maybe 7/8 question that´s not on this dump (55 total).

Canada
I studied ~2 months this with Fiber 324q, Microsoft book, labs from the book
Passed 840
Aprox 5-7 new questions
Working full time, no family

Agree with last comment. Both fiber and binary are both very accurate. Passed today using just these dumps. The test included maybe 5 new questions and a couple of old questions asked in a different way

This dump is super valid. I studied this with Fiber 324q. Passed with only 2 questions wrong. No new question and 100% from these dumps. Good luck guys.

From Saskatchewan

I passed today with 805. I studied this dump plus fiber 342.
Good luck!

passed today 870 studied this dump only
maybe 6 questions not seen before but what you learn stdying should get you through

passed 805. needs understanding off qns do not copy answrs but try to understand

Passed with 721 in India. Most questions(except 10 or 12) are from this dump!! Learn this dumps well you can pass!!

Passed the exam with 752/1000. Dumbs are valid i must say. :)

I passed today with 717 :-)

On the test there was many questions of this dump (abaut 70-80%)

Thank's for this dump

am going to write exam tomorrow, please any suggestion? Also is binary enough to pass?

Exam C, Q14 should be answer A I think.

Exam 2, Q9 seems to be wrong. Legal hold doesnt have a configurable retention period. Suspect this should be E/F

i passed today thair is many new qut BUT if you have some info from exchange you will pass

hello suzy

can you please tell if you study this dumb only or use another one also?

Thanks

I passed a hour ago. eeehhhhh 792!!! thank you !!!

dump still valid - I passed today in france - score 752!! thinks Binary..

i passed today. score 788. but about 5-8 questions out of dump. will need light knowledge of exchange to got-through this

Tanagorn or someone, is this exam (181questions) enough? or do you need to study this VCE plus the fiber (342questions)?

I pass 750/1000 .Thailand

Mauricio
Congrats Glad to hear fiber and binary is valid. you stated you found explanation of the answers. could you update file and upload. I know it would help many.

This exam is valid, I study fiber 342Q and Binary181Q.
I pass 911/1000, new 3 questions. Take care. Good Look

this dump is valid. i passed and got 805 score. i just study binary and fiber. goodluck and thank you binary and fiber. 3-5 questions are not on this dump. you can do it too. :)

I'm studying for these tests:
Binay 181q, 342q Fiber
I have the exam on July 4, apparently the responses of these tests are correct. I Locate the explanation of each online

Passed 29-06-2012 788/1000

The dump is valid but you still need real exchange 2010 knowledge to pass the exam

This dump is still very valid - took the exam today and passed - 823/1000

I studied: Binay 181q, Fiber 342q, and also Combined266q.
A few question variations.

j faill todey with 504 because j dont study hard for the exame, only feew hours before exame. the exam was easy, moust of the questions were from this dump and 420 but mixed and feew new. if you study hard jou will pass for schure. good luck.

I passed today.. barely, 735/1000! The exam was not so hard btw , if u study little bit harder u will surely pass.60 to 70% questions were from this dump 5 or 6 were new and the other were from fiber 342q .Be carefull the questions were mixxed up a litle so concentrate on the isssue of the question not the order!Good Luck!

Dump still valid - took the exam today and was able to passed it - 841/1000

Binay 181q, Fiber 342q, MajdSalha 420q and Combined15q

Thank you Guys! Goodluck!

Passed the exam today..studied this dump and fiber (342 q).3 or 4 questions were new..if you study the dumps you can pass..thanks n al d best guys

Agree with TemplarOD
Valid, passed today 800 i just study this 180q. Thank you so much
Around 6-8 new question. If you have 100% remember 180q. You must pass.

Hi Ayman, One question.Did you used this dump alone or some other dumps.

Passed Today 735/1000. just use this dump, around 15 new questions . take care Guys.

Good morning all,
Passed 70-662 exam yesterday with 788. There are many new questions. I used this dump and Fiber's (Also the technet articles and the exam kit). The explanations and screenshots are really usefull! Like every Microsoft exam you'll have to read carefully!
Thanks alot!

Passed today with +800 :)
i got around 20 questions from this dump,10-5 questions were modified from this dump and got around 15-20 new questions !!!

I used binary 15q, binary 181q, Fiber 342q & MajdSalha 420q

@TemplarOD what time you start with the exam in 13:00 ??? :)

Valid, passed today 800+ .
Very easy exam, just study this 180q. Thanks.
I studied only 3 days. First time with Exchange.

the dump is not valid at least 20 new questions

I passed with 947/1000 score. About 5-6 questions were new. I referred to binary 181q, Fiber 342q & MajdSalha 420q and other short one 15q & 8q.

Good Luck guys..

Beware Guys, Just attended the exam a while back. Many questions are new (10 - 15) and many others are modified too (20). I managed to pass barely. (referred to Binary, Fiber and Majd dumps). Many answers/questions are slightly changed to confuse. Please practice in labs/hands-on to tackle the tricky questions. All the best from Asia-Pacific !

I have chosen "Moderate" in the MS Survey for exchange skill level questions before the exam.

exam still valid, about 6 new questions, good luck everyone.

Passed today, Studied this dump only. Understand the questions and answers in the dump, then you will pass. Thank you Binary!

wtf are they talking about? this dump is in English and they can't write English?

@binary

What is the difference between your dumps (181q & 15q) & fiber's?

@haker Which dumps did you study? How many new questions?

many new and changed exam questions in reality. a little questions from damps on the net. shame you microsoft. very dificullt questions and the tipe of ansswering on the questions are different in reality

valid in egypt
Passed score 778 there are about 14 new question

Very easy exam,some questions were different from this.

Can anyone please advise on these 15 Q provieded by Mark?, not able to locate them?

Thanks

I passed the exam today. .totally 55 questions 2 questions only out of the dump.

dump is still valid..study fiber also.

all the best.

In addition to my previous post, if you still have enough time to review.
I have found a good like the shows you the common powershell commands that came out during my exam. see link below.

http://social.technet.microsoft.com/wiki/contents/articles/1632.common-exchange-2010-cmdlets-en-us.aspx

I barely passed with 717/1000 score. Thanks to all who shared their experiences in the exam. This is my second take, btw - FYI, I used Majdsalha 420q and binary 181q only.

There were around 10-15 new questions, but I can't remember them.
But one thing is for sure, a lot were questions related to power shell commands. My advise to those who have not taken the exam is to understand each cmdlets found in this dump (binary 181q) and surely will pass. e.g. New, Get, Set, Remove, etc. so understand it well as the dumps here lately are just 70% valid so memorizing them will not give you a guarantee to pass. unless majority will say 90% valid. don't get me wrong, this dump really helped me.

This dump is still valid- passed in Poland
55 questions- few new (don't remember them)
I also studied 15 questions from Max
Good luck guys!

Passed but many new questions in Implementing High Availability and Recover. This dump is still valid.

Failed today with 690. Not a single question from this dump or the one with over 300 questions.

@mason I don't no.

Many questions were about Powershell.
I thought the test had 64 questions but they had 55?

40 questions were about Powershell commands (monitoring and rights)

@onsite which dump is valid?

Exam have 55Q yesterday.
This one is not valid, only some questions are come back from this one.

@Mason, The answer is C. Here is the supporting information: http://exchangeserverpro.com/how-to-configure-a-relay-connector-for-exchange-server-2010

You deploy a Monitor Server srvApp1, you want that server so it can send notification mails to
administrator, through relay domain, which option should you use:

A: hub transport rule
B: send connector
C: receive connector
D: edge subscription
E: accepted domain
F: remote domain

what is the answer?

passed with 964 today. Most question in this dump and few question in fiber 342q. Two new question:
1. You need to modify the external URL of the Exchange Contrl Panel (ECP) .

Which node should you select from the Exchange Management Console (EMC) to make the modification?

To answer, select the appropriate node in the answer area.
--different this dumb but my answer the same of this dumb.==> answer: Select Server Configuration --> Client Access. i am not sure it true

2. You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The SMTP domain for the organization is contoso.com.

You enable the Exchange anti-spam features.
You need to specify a quarantine mailbox for the Exchange organization.

What should you do?
answer: Use Exchange Management Shell, modify Content Filter Config

I mean - A - answer is :

exam B, Q10 - screen is OK (server referal cost) but I think right A is :
D not B !! ??

Passed with 805 last Saturday. Studied This, MajdSalha and fiber dump. Few new Questions. Most question from this dumps but they try to confuse you with Similar questions one by one with Different answer.My result could been different if i could Completed all this dumps.My suggestion is "If you don't have any experience in exchange then Read all three dumps and Completed the exam in 30 minutes that's the best way you pass the exam and not confused with similar questions and you cant be failed and If you have experience you can read this dumps and Passed easily.

Exam A, Q4, possibly has the wrong answer listed. We wouldn't need an authoritative domain. There are TWO Exchange Organizations. Contoso is the Authoritative one, not Fabrikam. We would do an Internal Relay to Fabrikam, as they need to use our hub transport servers. http://technet.microsoft.com/en-us/library/aa995975.aspx

Unless, anyone else thinks differently?

@ noble - yes

OK...Congrats..but can you give us a clue on the new questions please????

Passed today barely, with 718. Studied 95% this and binary15q. I think fiber had a few questions which I should have studied more. I would say 4 new questions and 4-5 same questions with new answer options.

@MisterChoc,

Congrats...

What were the new questions all about?

today i passed the test with 850 points - i have learnd with this one and fibers.
with 3-4 new questions

i am scheduling it on June, i am a bit worry.

roger- I have exam in Poland next week. Have you booked your exam?

@ Unknown from Egypt - can you tell us how many Qs where from this dump ?
30% ? 60% ?
or from others ?

Failed yesterday only 628 , i used this and Magd and fiber there are many new question i don't see it in any dump here.after i finished the exam and before end exam to see result i was know that i'll pass with 700 or a few points bigger but it was shock to me. I'm very sad !

You have to use shell to disable text messaging on active sync.

the requirement here is to disable it on active sync ! not outlook web access !

Exam-B - Item 21:
Set-OwaMailboxPolicy -identity:default -TextMessagingEnabled:$false

Answer C is Right!

No, I haven't sat the exam yet.

@mason i am not asking about that question. i thought if you have sit for the exam, you can share with us if this dump is still valid.

i will scheduling on 1st week of june

@mason,

No, not yet.

The one thing I'm worried about on this question is that it isn't asking you to disable text messaging, it's asking to "Prevent users from enabling text message notifications". Notifications can be email, calendar, missed call & voicemail notifications, set via a rulebase (either in Outlook or OWA).

I think we're right though, D not C.

All speculation welcome. What do you think?

Egg, have you seat for the exam?

@ Bob

This just prevents users from using OWA from sending and receiving texts and creating text notification rules (as shown in the nice screen shot in the explanation).

Users would not be prevented from using Outlook for this.

Configuring an Exchange ActiveSync mailbox policy is a far better answer as this would restrict both OWA and Outlook.

http://technet.microsoft.com/en-us/library/bb123484.aspx - Allow text messaging.

Bob, you are incorrect. You have to use shell to disable text messaging on active sync. Open up the question and you see what we mean. the steps are provided in the answer.

Egg - you are incorrect. OWA mailbox policy is the right answer. Open up EMC and you'll see what I mean.

ich habe gestern den test auf deutsch gemacht und da warn viele dieser fragen enthalten..

If we just study this dump, will we pass? What are the differences between fiber's 342 questions and all COMBINED's dumps (266 questions, 281 questions & 181 questions) and binary's dumps (181 questions & 15 questions)??

Exam B, Q24 - You need to prevent users on the network from enabling text message notifications to their Windows mobile devices.

I absolutely agree. It's D ActiveSync mailbox policy, not C OWA mailbox policy.

i added lot of screenshots, explanations and links.