Pass Your Microsoft 70-417 Exam Easy!

On site is http://www.dotnetsql.com.br with various simulated Portuguese Online and free to anyone who wants to take the certification tests in microsoft Windows Server, Exchange, Sql Server, Dot.net.

Well worth checking out, because the simulated are 100% free and also show the evolution of his proofs for you to track how is the grip of their learning.

I found it very interesting, easy and no hassles!

Douglas Andrade

No site http://www.dotnetsql.com.br está com vários simulados em Portugues Online e gratuitos para quem quer tirar a certificação microsoft em provas de Windows Server, Exchange, Sql Server, Dot.net.

Jaap, you're wrong: see table on technetpage: http://technet.microsoft.com/en-us/library/jj573031.aspx

The answer should be:
All the folders: Azure Backup
System State: Windows Backup

@jaap RE: exam A Question 50 : I believe you are incorrect in your logic. The question shows folder 2 as having ntfs (efs) encryption and not bit locker encryption. Therefore the Agnostracised answer is correct.

@Agnostracised:

Exam A Question 50 :
You have a file server named Server1 that runs Windows Server 2012. The folders on Server1 are configured as shown in the
following table.



A new corporate policy states that backups must use Microsoft Online Backup whenever possible. You need to identify which technology you must use to back up Server1. The solution must use Microsoft Online Backup whenever possible. What should you identify? To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

The answer is wrong !

Your answer is:

- Online Backup
- Online Backup
- Online Backup
- Server backup

Folder 2 need is Online Backup but must be Server backup.
The reason: The filesystem is encrypted which is not supported.

Please read: http://technet.microsoft.com/en-us/library/hh831419.aspx



You can use Windows Azure Online Backup to back up content stored on fixed NTFS volumes. It CANNOT be used in the following situations:

Volume is locked by BitLocker Drive Encryption. If BitLocker is enabled on the volume, the volume must be unlocked before it can be backed up.

Volume is not formatted with NTFS.

Drive type is not fixed.

Volume is read-only.

Volume is not currently online.


Volume is on a network share.

Hi all, today I passed this test (70-410 - 887/70 to 412 - 900/70 to 411 - 962).
I learned from this dump. Beware of changes in matters. For example,
I had issues with the upgrade Windows 2008 R2 Server to Windows 2012
First CPU 32 bit - Windows 2008 Server R2
Second CPU 64 bit - Windows 2008 Server R2 Core
Third CPU 64 bit - Windows 2008 Server R2
Thank you for this dump.
Good luck

Hi, Passed today with 833, thanks ExanCollection

The dump is valid. Scored an 812 today.

@Alex:
61 questions in 3 section.

Exam A Q 24
Answer in correct (6 trusts), just add this reference: http://technet.microsoft.com/en-us/library/dd772648(v=ws.10).aspx

i think draven76 is right,
As domains join or leave the forest, the domain naming master makes the updates into active directory. Only this DC actually commits those changes into the directory. The domain naming master also commits the changes to application partitions. Like the schema master role, this role is a forest level FSMO, and it is only needed once across all domains in a forest. Also like the schema master, it is suggested to let this role be handled by the same domain controller - the PDC emulator in the forest root.

Exam A Q16

DC2 has to be online (the domain naming master role is required to be online when promoting additional DCs)

http://www.symantec.com/connect/articles/readyfsmo-roles-active-directory-windows-2008-server

@xb84h
how many questions there are at MC exam?

To 10.06 100q version: questions are 100% valid, but the answers was not. Passed today.

Thanks agnostracised, it all worked out great. It was fun testing and finding all the answers. Till next time on MCSE.

Pass 410-850, 411-800, 412-887. Random answers. one new questions.
Thanks guy for your help correcting the questiosn

hi checkers,
if I understood the answer to the question A44 is :
"WinRMRemoteWMIUsers"
thanks.

Q94
forget about what you think:)
just read technet or the server manager console itself it clearly states:
claim
property
rule
policy
(thats end of dac settings in ad)
then
set classificayion on files
enable dac in gpo
watch for events

check here for ipam stuff:
http://webcache.googleusercontent.com/search?q=cache:1QGQ1NPrEZgJ:www.microsoft.com/en-us/download/dlx/ThankYou.aspx%3Fid%3D29012+IPAM+ASM+Administrators+permissions&cd=3&hl=en&ct=clnk&gl=us

A domain user connecting to the IPAM server from a remote IPAM client must be a member of the ‘WinRMRemoteWMIUsers__' group on the IPAM server, in addition to being a member of the appropriate IPAM security group. IPAM client is an integrated component with the Server Manager RSAT. Server Manager RSAT is also available for download and installation on a Windows 8 Consumer Preview client machine. The IPAM node will appear in the Server Manager navigation tree by default on the Windows 8 Consumer Preview client RSAT.

Agnostracised
right on iapm(its mistake) provisioning cant be changed and its not just deleting the policy , it expected to apply the policies with filters when you do stuff in the console.
you need to uninstall and reinstall it

Agnostracised
i am with you
the original 37Q came out 2 weeks before the exam was even released(sep 17) so they are irrelevant.

My hyperV is working on my laptop and I have created a external switch over the wireless adaptor. My W2K12 server uses that switch so form own experience I can tell Wifi is supported.
For now, I think I am ready to take the exam tomorow at 09:00. Special hanks to Agnostracised, I let you know how it turned out.

Thanks for finding that. I couldn't find anything like that to save my life. However, I have no intentions of adding those 37 questions back to the exam since they aren't on the actual test.

Still--very good info to have.

Charo is correct 2012 Hyper v does support wireless - http://blogs.technet.com/b/yungchou/archive/2012/05/21/12-routines-of-windows-server-2012-using-a-non-touch-device-3-of-3.aspx

thanks a lot!!!

When you install IPAM and configure either manual OR GPO, you receive the same message about not being able to change the provisioning method.

As a matter of fact, I set it up in my lab and configured it as GPO. Here is a copy/paste of the message that is presently on the IPAM home page in server manager:

"The access configuration mode cannot be modified after completing the IPAM provisioning wizard"

Also, the help console in IPAM displays this when searching about provisioning methods:

"The managed server provisioning method cannot be changed after you complete the IPAM provisioning wizard."

I think those two items make it perfectly clear.

for Question 22, I have been reading the explanation but for manual provisioning, that is true. But if it was provisioned using GPO method, then I think it should be enough to just delete the GPO's as there are no other changes made during the initial setup. Am I missing stg here???

You'll note that in the google drive link the latest release has Exam C removed since it's confirmed not on the exam.

However, you need to post links and exampls to Hyper-V 2012 SERVER supporting a wireless NIC. The windows 8 and server Hyper-V instances are different.

Hyper-V does not support Wireless True or False:
Exam C: Q7.

Hyper-V 2012 support Wireless.
This question must be changed to FALSE.

Regards,

@Red and @Bigpapa, you've convinced me that A44 needed to be changed after providing the documentation. I've updated it.

After looking more at B27 I have to agree with Red that the specific rights have to be assigned. Since the questions specifically says to prevent further administrative rights, and the Backup Operators group has the ability to Restore and shutdown the server in addition to backing up files, then assigning the user backup files specifically would be the correct answer.

The document dated 2012-10-06 on the following Google Drive has these two corrections.

https://docs.google.com/folder/d/0B5P0a3kxoQ_IaUItVGFVbTZCXzg/edit

Keep the corrections coming!

I followed a first look course here in Holland and I am using that book. Also I hev build a test envirement to test the stuff. And then off course the papers suggested bij the helpers here. Maybe this is something interessting for you http://msl-events.cloudapp.net/EventRegistration.aspx?eid=b928d1bf-cb42-410e-9eff-5c1d4fc62eef

Guys,

Can you tell me where you get the study material. I cant find any nuggets for this or even a book.

Thanks

If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you must be a member of the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a member of the appropriate IPAM security group (or local Administrators group).

understanding ipam Doc Server 8

Q44 A must be changed

@ red
i dont agree with you at qb27

To use Windows Server Backup, you must be a member of the Backup Operators or Administrators group, or you must have been delegated the appropriate authority.

http://technet.microsoft.com/en-us/library/404a51b5-99a6-43d1-b5a5-36261cb5ade2

q27examB - Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012. You create a user account named User1 in the domain. You need to ensure that User1 can use Windows Server Backup to back up Server1. The solution must minimize the number of administrative rights assigned to User1. What should you do? - I disagree with your answer since it asks to minimize administrative rights - example, the ability to backup and not restore. I think A is the correct answer

http://www.microsoft.com/en-us/download/dlx/ThankYou.aspx?id=29012

Red - shoot me a link and I'll be happy to revisit in my document. I knew there had to be something like that out there but simply couldn't find it. Since I tried both the groups and they both worked correctly, I was at a loss on that one.

Q21 - I can not find adifference between winRMRemoteWMIusers and Remote Managment users , however per microsoft - If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you must be a member of the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a member of the appropriate IPAM security group (or local Administrators group).

Yes, the one at the google drive is the most recent, more recent than this posted exam. I decided to share a folder instead of just the exact Exam so I can provide updates to those following. Here is the new folder and the latest exam with 2 more corrections.

https://docs.google.com/folder/d/0B5P0a3kxoQ_IaUItVGFVbTZCXzg/edit

I left the extra questions on there more for training purposes. I added an extra document in the Google drive above that only has the 100q.

A28 should be HyperV on Server3 and Failover CM on Cluster 1.
A26 should be From Hyper-V Settings from Server 1, modify the Replication Configuration Changes. I had that one set incorrect to the wrong server as an oversight.

Also; this 5 comment limit SUCKS!

If you have suggestions on corrections, feel free to email or google chat me @ agnostracised@gmail.com

i say drop the extra q only valid ones from this exam are 100Q version

Hi Agnostraced,
is the one in https://docs.google.com/open?id=0B5P0a3kxoQ_IZ21iZnRHWWVGVUU the latest?

Thanks agin

This one is a little behind on the most recent updates. Suggest grabbing this until the site updates with the latest:

https://docs.google.com/open?id=0B5P0a3kxoQ_IZ21iZnRHWWVGVUU