Pass Your Microsoft 70-410 Exam Easy!

This dump is still valid in the Netherlands, passed today with a score of 905. 9 new questions.

@Dzha from United States - I have a better anwer on your question.
http://technet.microsoft.com/en-us/magazine/ff521761.aspx
When you enabled filtering, you define your filters using the MAC address,
Create an exclusion create an exclusion range for an existing DHCP scope.
Exclusion is for not use that IP Address or IP Address range in Scope.
Filter is for not use the MAC Address or MAC Address range.

@Dzha from United States
If you can fake a client MAC you can for sure change your client ip address too. Just reserve some dumb 00-00-00-00-00-00 ?

the questions are valid, I passed with 906/1000

Omura from Portugal:

Q149 is changed to Q102 in my system. How can I refer to a question correctly?

If you use loopback processing mode then at least one user configuration setting is applied regardless the loopback mode. In this case the user configuration part of the GP1 GPO is always applied and always have precedence. That's the point.

http://blogs.technet.com/b/askds/archive/2013/02/08/circle-back-to-loopback.aspx

You need to prevent the user configuration settings in GP1 from being applied to users, so simply turn it off in the GPO status page.

I've passed the exam with score 1000 yesterday. There were about 10 brand new questions. I'm really grateful for your help. Your dump helped me a lot.

From Thailand Passed with 931/1000 .10 New Question

Rick from United States, q203. I understand you are correct.

vanr2000 from United States, q183. Remove managers seems to be the only valid option yes. but I haven't get there at my review. maybe next week. I will try to upload today the vce as it is. half done.

ts from Unknown, when using the REPLACE mode, none of your other user GPOs will be applied when a user logs in to a machine that has loopback processing enabled. Exam doesn't ask to block all user GP . named GP1 is linked to the domain. upsss maybe a merge is the correct. Computer's GPOs are processed after the user's GPOs, they have precedence if any of the settings conflict. Decisions decisions decisions . Replace or Merge? Loopback Processing Mode is a sure.

ts from Unknown, you are wrong on answer about q149.
When configuring the policy Loopback Processing Mode, you can choose two different options, Replace and Merge.
I supose it's Loopback Processing Mode with Replace. You need to prevent the User Configuration settings in GP1 from being applied to users; using Merge will apply GP1 and computer local policy one after the other.
http://msmvps.com/blogs/cgross/archive/2009/10/12/group-policy-loopback-processing.aspx

vanr2000 from United States, you are correct on answer about q125
A server wide policy however cannot have an IP address range associated with it, Scope Level Policy can do it.

It valid Damp . , pass to day with score 984% , thanks God .

I think Q149 should be A, because you can do everything with storage spaces using the server manager. If you use the New-Virtualdisk cmdlet you have to know which storage pool you want to use, because it is a mandatory parameter.

Alhamdulillah
I have successfully pass the exam with score 921 today
VCE it was very helpful to me
thankx

Q102 should be D.

The GPO Status indicates whether either the user configuration or computer configuration of the GPO is enabled or disabled. It can have four possible values:

Enabled.
User configuration settings disabled.
Computer configuration settings disabled.
All settings disabled.

I think using loopback processing mode makes sense only when users and computers are in a different OU.

as promissed I'm reviewing the vce. will publish an update soon

thank u guys

Q144 should be C.

DHCP Guard is a security feature that drops DHCP server messages from unauthorized virtual machines pretending to be DHCP servers. If you want to use a virtual machine as a DHCP server, you definitely have to disable a DHCP guard feature.

The SR-IOV works only if you switch it on a virtual switch and a virtual machine as well. It is not possible to change a "non SR-IOV mode" external virtual switch into an "SR-IOV mode" switch. The choice must be made a switch creation time.

Q137 should be D instead of A. There is a starter GPO called GP01, so there is no need to create a starter GPOs folder. The Copy-GPO cmdlet doesn't work with starter GPOs.

Q148 : DHCP + WDS / on previous ver answer was 'disable the Do not listen on dhcp ports'. In this version it is inverted. which is the correct one ? Thx

Q 203.I think this should be A) You should consider making use of Server Manager. If you are preparing to install DNS you are working on the new server (2012). dcpromo no longer is used (unless you do it unattended!), making B wrong. You would install DNS, and AD through the server manager which would then brin gup each installation wizard. Maybe I'm reading this wrong.

I think q156 has a wrong answer. There are many predefined rules in the Windows Server 2012. 3 of them are for vpn connectivity. You just need to enable it:

Enable-NetFirewallRule -DisplayGroup "Routing And Remote Access"

Today I passed the exam with 984. This exam is great. Don't learn just the test. Try to see CBTNUggets or Trainsignal videos. Do the exercises in the videos and when studying the exam replicate the scenarios so you learn how to do it, so you can see what works and what don't

Just passed the exam today with 9xx score. The dump is still valid for the moment. Among 60 questions, 20 questions are new. Advise don't remember the answers , cause the answers sequence are random and some new answers are added into the questions.

Q183. A WMI filter is base only in computer characteristics, like memory, hard drive size, OS version, etc. no local groups. For me the answer is Configure deny apply policy to the group ABCmanagers, but this option doesn't exist. The other way is using "Item-level targeting" filter, where you can configure a condition for a user if they belong to a group but is not an option either, so I think the best option is remove manager users from the OU

Question 125. The right answer is Scope Level Policy. Even the reference for DHCP policy is right, there is a paragraph the said explicitly that this can't be done on Server Level Policy. "IP address range: The IP address range within a scope from which to assign an IP address to a client. A server level policy cannot have a setting for an IP address range"

Please if anybody disagree, give the argument, thanks

got 900 point today

thx! omoura

Passed today with 984/1000. Had 10 new questions. technically speaking, you can pass with test with a dump along. 10 questions is just a bit less than 200 points on your test. I would recommend, however, this dump along with CBT nuggets and or Trainsignal. You will be crazy to get MCSA/E by only doing dumps without actual knowledge of subject matter.

Best of luck to everyone else.

70-411 here I come. :)

Exam A Q197 the answer "c" is correct? in my opinion is correct the option "A"

OMoura, as far as I understand, this exam doesn't mention all the topics of the exam. Am i right?

Disable in one server the global names.

This dump is very valid. 3 new questions. One question that is new is about : 2 servers with two dc diferent And global names activate. We need to disable one global?

@Omoura

Thanks for your time spend on this dump. this is one of the better ones.

Exam B Q5: Question states that you need to ensure that a specific IP address in never assigned by a Win 2012 DHCP server to ANY device connecting to the network.
I don't think that reservation is best answer. You will need a MAC address for reservation, so unless you use a made up MAC you will have a computer that will eventually get that IP address that you don't want to assign. I think better option would be to exclude that IP address from the range. That can be done by going to "Address Pool" but that is not an option. What do you think guys?

@ Omoura, John is right for Q4 (it's actually Q199) the answer is B, C as they are not valid option to take

This test is a test upgrade Xelian169q?

John and Js-
q45 - what you're telling me is what I have at dump.
Clean Installation on new hardware.
Clean Installation on new hardware.
Upgrade on existing hardware.

John-
I do not understand your Q1 to Q7. please tell me what you're doing.
I will check MadniTiger230 dump tonight.

Q45 is correct as:

Server 1 x86 - 32-bit Server 2008 R2 with SP2 (Full)

Answer - Clean Installation on new hardware.

Server 2 x86 - 32-bit Server 2008 R2 with SP2 (Core)


Answer - Clean Installation on new hardware.

Server 3 x64 - 64 bit Server 2008 R2 (Full)

Answer - Upgrade on existing hardware.

As Windows Server 2012 is x64 bit.

Q45. You will need upgrade the hardware because processor x86 and windows server 2012 only works in x64

@Omoura, please go through the dump by MadniTiger230 as there is new questions, but the answers are wrong, so please try correct the answers.

Review Questions:

Q1 - Answer is B,E as Thin provisioning allows the disk to grow and Storage pools with 4 disks is needed.

Q2 - Answer could be B or D, I would go with B as the more correct answer as it's Server 2012 and Storage Pool's are a new feature in Server 2012.

Q3 - Answer is:

Enable Option 60 PXEClient.
Enabled the Do not listen on DHCP ports option.

Q4 - Answer is: B,C as the question states which is not a valid option to take, the correct answer would be B and C as it has "SR13" in them and the question states nothing about a SR13, so B and C would be the correct answers here.

Q5 - Answer is: A as you would need to use Server Manager to install the AD DS role.

Q6 - Answer is B, C.

Q7 - Answer is B.

js-
q163, I suppose you are right, that's one of those I need to review. If you check all other dumps the stub answer is the selected.. knowing what a stub is I do not see how it can help to prevent users to resolve Internet host names for the client computers. But I left it as it was.

q45. It's 2008 R2 ( without SP1 ) but if you install SP1 it's full upgraded to 2012. You have to see it asks for:
The solution must meet the following requirements:
· Upgrade the existing operating system whenever possible.
· Minimize hardware purchases.

This dump is for review, some questions need better and correct answer.
Please comment and propose new answers if you beleive it's more correct.
I want to review and correct to place a new version of this file online.

I think that:
Question 45 the answer is wrong :
Must be clean Installation and upgrade hardware.
Question 163 the answer is wrong :
I think will be Primary Zone "."

Thanks Omoura very nicely done. I like the way that the questions are put into section.