For the past week, been trying to figure out why a Gigabyte Designare x399 motherboard's reset button doesn't work and the motherboard's power button that will only turn the rig on but not off. The rig powers up, but will not post nor is there a video signal. It's for a Threadripper rendering...
So the guy who testified at a Georgia Senate Hearing for election integrity just caught someone in China accessing the Dominion Voting machines using the hidden WIFI network on the TV. It's a 2 way connection which I assume means they can access and change voter data. The TV was purchased from a...
Thanx for the reply. It's fully modular and only the cables from the PSU was used.
https://www.amazon.ca/gp/product/B00COIZTZM/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
My WD Blue 3D NAND 1TB SSD caught fire last week. Drops of burning melting plastic set the carpet on fire burning a hole. So from the photos, you think it was the cable from an EVGA Supernova 1300W PSU or the connector on the SSD. I'm kinda leaning towards the SSD connector since the cables...
Can I assume the poor RAM performance and bad 2D is causing issues like system lag when I've been working for a few hours using 3d rendering programs. Got so bad sometimes, I had to reboot. Never had any issues like that on my old rig. Was planning to get another 32Gb of ram until I saw this...
Just built a new Threadripper 2950x gaming/rendering rig to replace my 5 yr old i7 5930k system. Problem is, every once in a while, performance takes a nose dive. Videos play all pixellated, takes forever to read data on secondary drives, and games/software takes a lot longer to launch...
Weird problem. PC won't boot unless clearing the CMOS and it appears that this problem started at the sametime as getting the USB Device Not Recognized when the PC finally boots in windows. After the PC boots and I get that usb error message, the Keyboard and mouse don't work. Windows does...
Weird problem. Just built a new 2950x rig to replace an aging 5930k system. When I try to link them up on my network to transfer files, neither one detects the other. So I add an old laptop into the mix just to make sure the network is working, both the 2950x and 5930k rigs see the laptop and...
Hey guys -
was just about to pull the trigger on a new $3000 2950x 5 GPU ( 2 RTX 2080 ti's and 3 GTX 970's ) iRay rendering rig to replace an i7 5930k setup (using 2 2080 Ti's I already have ) using a program called DAZ studio. A program that makes use of all GPU's...
Thanks for the reply. I ended up keeping the TV. Went to Rtings.com posting the same topic and one of the reviewers mentioned there was a firmware update that addressed this issue in the fall. So all those comments I read were all prior to the update. Went into one of the expert modes...
This so messed up, I got the 65" over the weekend to use for gaming and home theatre and I'm planning to return it. HDR in PC mode is all washed out and faded. Spent 2 days trying to fix it with no success. Googled "c8 OLED PC mode broken" and a lot of people are reporting the same problem...
The software used above was supposed to release an iRay plugin last month but has delayed it for a couple of months. Decided to try another program called Daz Studio that's actually free, including the iRay plugin. Using the combination of 2 GTX970's and a RTX 2080 ti, video below took just...
Thanks guys, reinstalled the 970 and was able to reproduce the same problem. Checked with folks using this software and it's definitely a bug. For some reason, when working on a 4k display and you don't scale the screen so text and UI graphics are enlarged for easier reading, the rendering...
Software I'm using is called iClone. There are a few people using the 2080 TI in the help forums, but no one reported any compatibility issues, just really good performance. Posted the video in their help forum, still waiting for replies.
Read in the Nvidia forums that GPU renders can also show the same issues inherent to the 2080 TI. Same clip using a GTX 970 took 9 times longer to render, but it was flawless. Might need to watch it full screen to see all the defects.
Sorry for taking so long to reply back. Using my outdated gaming rig to perform some CGI for work and can't really do anything else while it's rendering (software makes no use of multiple GPU's). If you can believe it, my rig is still twice as fast as the company CAD laptop I've been issued...
So once in a while, I accidentally click sleep mode when shutting down ( or inadvertently push the sleep button on keyboard and occasionally after a BSOD). After that, it's a world of hurt just to power back up, and when it does so, all 3 GTX 970's, Nvidia drivers along with all associated...
GTX-970 Stops Working When TV Source Is Switched From PC to CableTV & Back To PC
Hope gurus in this forum can shed some light on this. I've got a gaming 3-way SLI GTX-970's rig hooked up to a 65" TC-65AX800 4K TV. Whenever I change the source from PC to any other source like Cable or...
Recently put together an i7-5930K GTX970 3 way SLI gaming rig for 4K Panasonic TC-65AX800 3D LED TV using the displayport. Whenever it boots up, screen splits into 2 with each side the displaying the same thing. It's like 3D side by side mode Same thing happens when I'm in the Bios, but after...
Hey Guys -
I've been a user of Private Internet Access (PIA) for over a year now and don't really have anything to complain about. Then I started reading how PIA was considered a lower tier VPN service compared to HideMyAss and PureVPN. They're always at the top of VPN speed charts so I...
So I got my hands on the Panasonic TC-65AX800 4k 3D LED TV that's capable of 4K@60Hz in full 4:4:4 Chroma. It's also one of the only TV's out with a displayport. Have it hooked up to i7 5930K rig with 3 GTX970's in 3 way SLI which is capable of supporting 4K@60Hz in full 4:4:4 Chroma in HDMI...
Thanks. Unfortunately, I used the patch from that thread and the Asus OC 970 was no longer being recognized as an nNivida card. Had to remove all Nvidia related files on my PC and then perform a fresh install of Nvidia drivers before it would be detected again. I'm just gonna return it, eat...
I'm pulling my hair out. Trying to tri-SLI 2 Zotac GTX 970's and an Asus OC 970 on an Asus x99 Deluxe. Regardless of whatever the connection combination, Nvidia control panel says to connect a bridge to the Asus 970.
Even in 2 way SLI, the 2 Zotac's work OK. But replacing one of the Zotacs...
So I finally pulled the trigger on an i7-5930K rig to replace my i7-3770k system lost in a fire. System includes Asus x99 Deluxe, 4x4Gb 2400Mhz DDR4 ram, 1000W EVGA Supernova Gold, H105i water cooler, SX900 256Gb SSD and a pair of R9 270 in crossfire.
Problem is, it's barely outperforming an...
X99 Deluxe has latest bios, both R9 270 drivers are up to date and the jumper switch on the board is set 2x crossfire. I'm even using the 2 recommended PCI-E slots for CFX, but Catalyst Control panel keeps telling me the crossfire bridge needs to be connected.
Isn't CFX supposed to be done...
Investigator believes it either overheated or shorted out and ignited a dust bunny that made it's way into the inner works of the surge protector's housing. But I don't think it was conclusive enough for them to launch legal action and he couldn't find any recalls of surge protectors that fit...
Thanks for the replies and kind words everyone. I actually reside in southern Ontario.
Probably sounds hard to believe, but the fire took place on the night before I was planning to attend a homicide trial for 2 SOBs that murdered a former engineering classmate and really good friend of...
So as the title says, I lost my house and everything I ever owned in a fire a couple of months ago.
This included a 50" 4K LED monitor, an LG 65" 3D 1080P LED HDTV and a 7.1 Onkyo 1200W Surround Sound system that saved me the trouble of having to climb up on my roof to remove snow. The...
Currently have an i7-920 and an i7-3770k setup.
Authoring a 700Mb AVI file to DVD using AVS Video Converter which takes advantage of multiple core systems.
i7-920 @ 2.667Ghz system took 42 min
i7-3770k @ 3.5 Ghz Took 11 min,
Any Guesses How Much Faster a 6 core i7-4930k Will Be ?
Transferring close to 1Tb worth of Data from a desktop HDD to coworkers Seagate Central STCG3000200 NAS and it's taking forever. The first 70 Gb's took almost 4 hrs. At that rate, I'm looking at leaving my PC on for 56 hrs. Connecting a portable USB3.0 drive to the USB port was ever slower...
When Sapphire HD 7950 OC is connected to a 4K Display, maximum resolution is only 1080P. If I swap it with a Gigabyte HD 7950, 4K works fine.
Anyone know why this is happening ?
Removed all cards and plugged monitor into onboard video. Used AMD driver removal tool to uninstall all Catalyst components. Uninstalled Realtek driver and re-installed. Still no analog or digital onboard audio.
Performed fresh install of Windows 7 with no video cards inserted. Loaded...
Thank You Both !!!!!!
I've changed it to Realtek optical, but there's no sound and the port doesn't light up. The analog option is greyed out saying nothing is plugged in, but it is. Below is the only setting that produces sound.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.