I really don't like to pass on bad news, but in this case I will. I had the same setup as you did about 30 days ago and changed out the cpu to a 3.06 HT 533. WOW what an upgrade. However, I've tried upping the fsb between 134 - 150 and I had problems. The agp goes bad about 144-145, the usb...
If you are trying to setup raid with a dead bios it won't work. You will have to put a single hard drive on the 0 ide chanle and load windows and reboot. Hopefully, you will be able to get windows to load. If that doesn't work, boot to dos with a win98 bootdisk and reflash your bios. If...
yes, I used cpuz....nice little program, but it won't let you change anything....thanks for the replies...
A year ago, I had a amd/via setup. It had all of the bells and whistles in the bios. You could tweak just about anything. It was an Award bios however. Amibios is OK, but it just...
Inside the amisetup menu it shows all of the new options when I enabled them via amibcp75 program. The only thing that I don't have are ram settings. So, if I were to overclock my system alittle, just maybe by altering the ram settings, I will be able to make my system more stable......
Rf37
I have an AMIBIOS. The setup screen says Amibios setup utility ver 3.31a. I've used a bios tool called Amibcp75 to reveal the hidden settings and I turned them all on just to what they were. The names of each item were not revealed by the program, but I was able to enable the settings...
Hello,
I would like to edit some values; however, I don't know what program to use. I succeeded in unlocking 99% of my hidden bios features, except for one.......Hyperthreading.... I used a utility called " tmods biosmodv3". Next, I ran Intel's Hyperthreading technology readiness tool and it...
Hello,
I would like to edit some values; however, I don't know what program to use. I succeeded in unlocking 99% of my hidden bios features, except for one.......Hyperthreading.... I used a utility called " tmods biosmodv3". Next, I ran Intel's Hyperthreading technology readiness tool...
I have a cpu frequency problem...please help.
I have a Giga bite motherboard. 8IHXP Intell 850e chipset. Rev. 2.
Intel 2.5 mhz processor (533 bus speed)
Mother will not allow me to change the frequency. Settings are for the processor are as follows:
19 x 133.33 mhz (locked) not overclocked...
I'm currently using 11060391.pcr file with wpcredit/wpcreset. I'm trying to change register 75 (value is A2) to value 81. I've used A0 and A1. I've had no luck. Sandra sisoft 2001te stardard edition related to me that my Dlink pci card's latency is set too high. I can't change it in the...
I was wondering how do I change the pci latency? My Dlink 10/100 was reported by Sandra Sisoft as hogging the pci bus. The pci latency was too high. I've looked inside the bios and I couldn't find anything that could change the pci latency. I'm using the luckydaze bios rev KKR0515.
I have...
I currently have an Athlon TB 1.2ghz @ 1.4ghz vcore is 1.65 in Iwill kk266R BIOS, but Sandra reads it as 1.73v. The cpu settings are 133 X 10.5. CPU temp is 97.2F/ 36.2C.. The mainboard temp is 77.7F / 25.4C. I'm using a Swiftech MC462 hsf and Enermax 431W ps. So far no problems....
rgf
I just received my Athlon 1.2 ghz 266fbs processor and an Iwill KK266-R motherboard today.
Athlon 1.2 266mhz fbs
A1200AMS3C
AXIA0114VPAW
95487650554
1999 AMD
Iwill KK266-R ver 1.2
What can I expect from the Athlon AXIA "9" retail? It came with a hsf w/ a pull tab that has some...
I was in the same boat you are in now. I would purchase an Iwill kk266-R motherboard and an Athlon 1.2 ghz/ 266mhz bus processor. You can get a good deal over at Newegg.com. Remmember, this board uses sdrm. Buy crucial or mushkin sdram. Go to mushkin.com and purchase 128 MB PC 133 rev 3...
I'm going to build a new system. I was thinking of the Iwill KK266-R. I would like to utilize the ram that I have in my old system. I currently have three Mushkin 128mb PC133 rev 3 sdram. Newegg has the board at $122. I would like to buy an AMD 1 GHZ processor, but I don't know which one...
I would like to buy the following:
P3 700E cpu
MSI slocket
Golden orb or other hsf?
I would like to purchase all three from one online dealer, but I don't know which one. Please help.
RGF:confused:
damocles,
I'm going to make a newer system with some other parts from my Abit Bh6 sytem. It's time to make a change. I don't know how much longer my Abit Bh6 will last. It's almost 3 years old now.
Thanks for the help!
rgf
I have basically the same setup but with a Cel 300A oc'd 450 mhz. I was deciding today on whether or not to upgrade or build a new system. I have a post above yours. Titled "which motherboard for a P3 700mhz~1ghz." I thought that I might as well spend the money for a system upgrade...
I want to build a new system. I going to keep the following items from my old system built back in 1998.
Enlight 300wt case
SB Live pci
LS-120
2 mushkin rev3 128
1 corsair pc100 128....this will be replaced by another mushkin rev3
DVD 16x
I'm deciding on a new motherboad over on PowerUp's...
I'm going to build a new computer. I'll keep the following from the old computer built back in 1998.
Enlight tower 300watts
DVD 12X
LS-120
SB Live pci
Voodoo 3000 agp
2 Mushkin 128 rev3
1 Corsair pc100 128
I'm deciding on a new motherboard and processor over on PowerUp (www.puicorp.com)
I was...
I'm upgrading an old Abit BH6. I'm looking for sites to purchase an MSI 6905 master rev 2.3....
Also, what heatsink/fan combination is recommended? Thanks.
rgf
mcs,
No MCS, I would like to purchase a new processor for the current system and then build a new system this July or August. I'm short on funds right now. I read in todays paper that the IRS might be sending $300.00 refund to single tax payers this summer. That would come in real handy...
:cool:
I currently have the following:
Abit Bh6 rev 1.01 (ss) bios
Cel 300a oc'd 450mhz
2 X Mushkin 128mb rev 3 pc 133 and 1x Corsair 128 pc100 (They work together at 100 FSB)
WesternDigital 8.6 gb hd and a Maxtor 1.62 hd
dvd 16X
LS-120
SBLive pci
56k external modem
100mb Zip drive
Sony...
My cable company, Classic Cable, just dropped their cable modem service. I don't want to go back to analog. I'm currently looking into wireless or satillite service. Any recommendations on either? Right now dsl and isdn are not available in the area thanks to Southwestern Bell. Please help...
To norssak... No, I really don't need the crap from you. I only asked a simple question and I don't need any smartass respones from you. I did check passed messages on all threads and I didn't find anything recent. If you can't post anything in a helpful manner, please don't respond at all...
Hey I was just wondering.....No need to get testy! Yes I will be buying a cross over cable for my nic cards, but I just asked a simple question. I know that null modem connections are possible through serial cable connections. I just thought that in a desperate situation, would two analog...
I'm new to networking and I was wondering if I can netwok two computers by running a phonline between both computers? I'm am going to buy a cross over cable for my nic cards, but is it still possible and what would the network settings be?
Thanks,
rgf
I would like to purchase a MSI K7T PRO 2A mb, but I don't know who is the most reliable. I would like your opinions please. Also, I would like to know which processor/hsf to purchase. I do intend on overclocking in the future.
I've read a post a while back that said that the MSI K7T pro2a...
No, I won't be getting cable for a long while. My cable service only has download cable service and upload via analog modem. They told me it won't be until next December until they have two way cable modem service. I thought it would be a good idea to install a Dlink 10/100 nic card. It was...
Both of my computers are running Windows 98. I just installed two Dlink 10/100 nic cards. Is it possible to get them connected with a single fastcat 5e cable? Will it work or do I need a hub? Thanks
rgf
I'm in the same boat you are in right now. I also have an Abit BH6 rev 1.0 mb. I was told to purchase a P3 700E FCPGA and Abit or MSI slotket. I'm currently looking for a place to purchase the P3 700e. It's much better for overclocking than the P3 850E.
rgf
I currently have one stick of Corsair 128 mb sdram pc100 in bank 3. It's there for overclocking stability. I put the two new Mushkin 133mhz sdram in banks 1 and 2. There is a problem when all three sticks are used. I've tested all three together and I get an address error. However, when I...
Syborg1211,
Hi...i just ordered 2 sticks of Mushkin 133 rev 3 sdram on Saturday. I haven't seen the Fedex parcel yet, but I expect it Wednesday afternoon. I don't know about the contents. I hope both sticks of ram come in the same parcel. I'll let you know as soon as it comes in.
rgf
To Stonythug and Paulip 88,
Thanks for the input. I have been building systems for about six years now, and I thought that my current system would last for about three years. Now, I would like to purchase a motherboard that has atleast "fixed" the bottleneck between the system...
I just purchased 2 sticks of 128 Mushkin rev 3 222 sdram. They were $133.00 /stick. Shipping and handling was free. I was thinking about putting them in my Abit BH6 rev 1.0 MB, but Mushkin support recommended not to install them in my motherboard. So, now I was thinking of purchasing a new...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.