I'm trying out GAIM now and so far I like it. Is there anyway to set your profile though?
The reason I'm staying away from Trillian is that I don't really want the extra resources if all I use is AIM.
Does anyone know of good AIM alternatives for Windows? I'm really getting sick of the ads embedded within AOL's client. They're using full blown video now with audio in addition to using Java.
I walked into my room and a commercial for Lowes Hardware was playing within AIM. This is getting...
I have a client who just got in a new a Dell server running Windows 2003 server. The new server is also running a 2 disk raid for redundancy. While I've worked on 2000 and 2003 servers a bit, I've never done a migration.
1) What's the best way to migrate the network settings? Are there any...
I ended up with the YS-Tech 80mm adjustable from newegg. I complained to them about the shipping rates ($6 shipping for one, $12 for two) and they gave me free shipping :) CS Rep Caesar is the man.
Thanks for your suggestions guys
-Bill
By the end of the week im going to be running a 2400+ with an SK7, but I don't know which fan to get for the heatsink. I want something on the quiet side of things but won't let my temps get too high. Any suggestions?
-Bill
In task manager under the process list, enable the columns for IO Read and IO Write activity. Then you can monitor in realtime which processes are writing to the disk.
-Bill
From 7volts.com:
"How do you get 7 volts out of the 12 and 5 volts supplied by the Yellow Black Black Red Molex connector you ask? You use the yellow 12v wire as the power connector to the fan and use the red 5v connector as the fan ground. The fan sees the potential difference between the...
LetsPlayGames:
Which Leadtek Ti200 do you have? I have the one with only TV out from newegg. I can't seem to go beyond 220/515 without getting "snow" artifacts in Tribes 2.
Do you know what brand memory is on your card? Mine is some company I never heard of that begins with an E (I forgot heh).
I thought this might have been possible before I had the processor in my hands. When I first looked at how small the L1 bridges were I nearly sh*t myself.
Good luck and if you do manage post some pics.
Could anyone that has used a hole saw with a handheld drill to cut a blowhole describe the method you used. So far some say to use lube and go fast, other say go slow and apply a lot of pressure. (I know what you're thinking.. perverts.)
So what is everyone's opinion on cutting the hole?
It seems they're all overpriced at ~10-15 dollars just for a molded piece of plastic. Does anyone know a method to construct one? I have thought about using that "plastic cardboard" material from the box which my Epox 8KHA+ came in and just taping the fan completely around the edges to it.
Has...
Anyone have any insight as to why when I set my multiplyer 140x11.5, my bios resets the multiplyer to 11 but if i make it 137x11.5 it doesnt. Also 133x12 works fine. The CPU is a Athlon XP 1700+ and I'm using the 11/2/2001 bios.
I have an Athlon XP 1700+ (1.47Ghz) oc'ed to 1606 Mhz. My case temp is 34C idle right now. Room temp is 24C. I'm wondering how I can cool it better. I stuck an 80mm in the back back in addition to the one it came with on the front. I also enlarged the holes on the front to about 5mm in diameter...
Let me just say if you're using the conductive paint BE PRECISE AS HELL.
I filled the grooves with silicon thermal compound and used the window defogger paint to bridge it. Basically it's the Tom's Hardware method except the super glue.
Those that have a 1700+ how far have you pushed yours...
I have a Epox 8KHA+ and an XP 1700+ w/ a Volcano 6cu+ hsf
I heard somewhere that it isn't good for such a powerful (7000rpm) fan to run off the motherboard. On the box it says its power input is rated at 4.44W. Is this too much for the motherboard to handle?
Heh... i ordered it last night before I even saw this thread. I didn't realize it has a different hsf. DO you think the ramsinks even make that much of a difference when ocing the memory?
I have an everglide but to tell you the truth my desk must be special bcause its smoother and the mouse moves easier on the desk than on the everglide.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.