Long story short, using v391.35 (due to issues with newer versions) for a GTX1060 on a Win7 Pro x64 AMD based MB, I used Device Manager to just install the drivers, with none of that other bloat. That older version was used due to another issue with driver signing (that's another story).
It...
I don't believe this is exclusive a nVidia card issue, it just happens to to apply here.
Running W7 Pro x64, I do have those two SHA-2' KB patches installed, but when I try to install nVidia drivers using DM (no need for that bloated Ctl Panel and all the fluff), the installation goes fine, but...
Specs;
Gigabyte GA-970A-D3P Rev 2 older MB (2016) AMD based system.
Main drive; 250GB SSD W7 Pro x64 MBR no hidden partitions
Backup; brand new 4TB same O/S GPT one created System partition using Disk Part .
Backup is seen in the Bios, but won't boot even if the SSD is disconnected. The MB is...
I thought this was a Router issue, it's not. I have a laptop that is running W7 Pro x64, the same as my desktop tower and the program seems to work fine. But not on the desktop. Something is corrupted somewhere. I do have a older 'image' of the O/S, but I would like to try to find the problem...
Well, to keep thing more interesting, I opened up the software to check on settings as I was asked about and out of the blue the Quad View came up with the 4 cameras, but the image then started to break up. I clicked on a single camera and it produced decent live video. I immediately went to...
I do have a Laptop but it uses the same base image of the O/S as the tower I'm using now. But, none of that answers the current issue of dropped active clients in the Router.
As to the software, I don't think there are older versions on their website, but right now, again that isn't the issue...
As to the software, that unit with that problem went back. Software isn't a issue with this situation, it's not even running (it doesn't run at startup).
As to your questions; no, I never looked at Event Viewer (never thought about it and don't remember when I used it last.) And no, I'm not...
The 3rd unit arrived and now what is happening is the Router (or the DVR) is dropping out after 20-30 seconds after a reboot. It never comes back, so now the question is can a Router kick off a device? Or can a device 'drop' it's connection with a router?? This surely isn't a O/S issue.
Same Network as the 1st unit,
I do have a Laptop, but that unit has been sent back for another exchange (it came from B&H Photo in NYC, great to do business with !!!)
I don't have a cell phone (that's a 4 letter word here).
Yes, I'm lost too, one would think streaming is streaming if it is...
Thanks for the reply.
This is a brand new unit w/ a brand new HDD. Yes to your question, but that isn't the issue. But it's the Live View that has the problem, not PB. ;)
FYI;
Here is the DVR;
https://www.specotech.com/product/d4vx3tb-2/
The software is here (but you have to register to d/l);
https://www.specotech.com/secureguard-cms-digital-download/
I have a CCTV DVR (Speco Tech if that matters) that uses a software program to connect to a PC. There are two basic modes; Live TV and Playback. Both functions are pretty much self explanatory.
I was having issues with the 1st unit I received (new) but that one did NOT have this issue. The 2nd...
Funny, I was notified this time of your entry, but I see my post was edited by a modulator. I would like to know exactly why ! Also interesting I never received any replies to my original post and that is with over 1,000 'views'. :rage::rage:
Ok, I removed the software, mostly manually and I did two searches, one using "Everything Search" and the other using "Registry Crawler" with Panasonic the key word. Previously, I didn't search the Registry.
I reloaded the two program files and tested the scanner. It worked.
So far so good. I...
Out of the blue (well almost) the Scanner function has stop working. The machine goes thru the cycle of scanning, but no file is produced. I've never had a problem with this on more than one of theses printers. Here is what I have done;
Did a search, but nothing other than a bad MS KB update...
I was tiring to update the drivers for this card via Device Manager, first uninstalling the older drivers and deleting the files. The install was done by pointing DM to the specific drivers only folder (I didn't want their Control panel). It appeared to install ok, but a ! was displayed for that...
I ordered 2 8GB DDR3 strips for what I paid for the original 2x 4GB ones ($45). I was planning on removing the existing strips, but can I just add those 2 new strips to the existing ones? IIRC, the lower speed governors the speed of the higher speed strips.
I do realize everything needs to be...
Present system;
Gigabyte 970A-D3P
AMD FX-8350
Nvida Ge-Force GTX-1060 3GB
G-Skill DDR3-1867 4GB x2 memory sticks
Win 7 Pro x64
Video files up to 1080p. NO 2160p (4k) editing. This is for faster video editing, not gaming, thou I realize many factors are similar.
Questions;
For memory I read 16...
I belong to a number of forums and almost always have e-mail notifications sent out for that thread I was in getting new activity.
This one isn't; avsforum.com
I have contacted two different "administrators' and they are claiming it's my browser (naturally). I cleared cash & cookies as...
I'm having a huge problem when I type to the extent I spend more correcting the mistypes then I do typing the the sentence.
What is happening is my second finger is hitting the right button (on a standard mouse) and bring up the context menu. Is here a mous with a shorter right cli k button were...
The problem was a very poor dialog box popup pointing one to something it wasn't. Typical of M$.
Wording is key, not a exact message, but something as; unable to make connection, unable to access, or in this case unable to find. Generic, but accurate and NOT misleading sending the user on a wild...
Long story short; there were multiple (duplicate) Samba directory entries of the same HDD which apparently caused the lamo M$ inaccurate error messages that had absolutely nothing to do with logins! :mad: :mad:
I deleted all entries in the Samba directory, rebooted, the single HDD showed and...
That's the best way to summarize the problem.
The Media Player is a Zidoo x10 that uses OpenWrt for the interface for the LAN, (not WAN from what I understand from others). I can access the HDD on the X10 from a Win 7 PC, but I can't login due to a username and/or password issue.
I can access...
Gross exaggeration !
The only "damage" s you put it is the lack of file sharing. If M$ would stop adding redacted to every new O/S, we wouldn't need "Lite" programs like this for users that don't need or want all of their crap!!!! :mad::mad::mad:
Profanity isn't allowed in the tech sub-forums...
You are missing the point. I could care less about any firewall, but file sharing does. I can't share any drives or folders withpout it. It can even be disabled, it apparently has to be there which I wasn't aware of or I wouldn't of removed it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.