LCD rear projection looks better a real LCD..from the same company no less? I find that extremely hard to believe.
Any chance the fact that you own a SXRD plays into your opinion?
For many TV's with 1080p/24 support, this makes no difference. You need to have a TV which not only supports 1080p/24 but also avoids the 3:2 pull-down. However, I'd expect true 1080p/24 support to increase dramatically over the next year or so.
Point taken w/ respect to the improved scaler.
However, deinterlacing a 1080i/60 into a 1080p picture does not require upscaling. It only requires de-interlacing which is why the picture will look exactly the same. You will not see any picture quality improvement between the A3 and the...
I pretty sure the only difference is that the A3 does not support 1080p/24 which is also not supported by many displays and certainly not the OP's 720p display. Other than that, the picture displayed on a 1080p panel connected to either the A3 or A30 will be exactly the same. I don't see any...
It should not matter. You still end up with the same picture. Basically, 1080i as encoded by HD-DVD includes all the information necessary to display a 1080p picture, so long as your TV properly de-interlaces it.
Any new 1080p TV should de-interlace w/o a problem. You would have to find...
a 1080p display would de-interlace the 1080i signal to give the exact same picture. There would be no difference in quality. In your situation, get the a3 for now.
Juniors is not what it used to be. The last couple of times I've had it (most recently from the Manhattan location), it was noticeably inferior. They screwed something up. It used to be pretty damn good though.
Perhaps but diamonds are graded and priced on a scale. Therefore, for all practical purposes, a D color FL is perfect.
Besides, you are ignoring the most important aspect of creating a diamond. CUTTING and POLISHING. This has always been done by man.
Also, can you show me where to...
I have a 605 and I'm pretty sure you can pass the audio if you want to. It's turned off by default but I remember seeing the option in the menu system. I have not tried it though.
However, why pass the audio anyway? Aren't your speakers connected to the receiver? Why buy a receiver if you...
That's max. Plsama varies (as opposed to LCD which is fixed) and when claibrated, on average, would be about 1/2 of that.
I'd get the new Panasonic w/o question.
What do you say to this?
Game 1 Starter
Andy Pettitte (steroids)
Yankees win
Game 2 Starter
Roger Clemens (steroids)
Yankees win
Game 3 Starter
Orlando Hernandez
Mets win
Game 4 Starter
Denny Neagle (steroids)
Yankees win
Game 5 Starter
Andy Pettitte (steroids)...
Why not 417K on the 1st mortgage which is the conforming limit? Also, It might push rates up but the limit is supposed to increase for 1 year with the new economic stimulus package.
In the end, you need to figure out how long it will take to make up the difference. If it costs you 3K to...
Did you even read your own link?
On a plasma brightness and contrast don't change with viewing angle.
Since I have both a Sharp LCD and Panasonic Plasma I can take a picture. However, it's not always an easy thing to demonstrate. You would need pictures straight on and off angle using...
Nope. It's true and has nothing to do with the backlight. It's has to do with the construction of the actual pixels. LCD's have a pretty severe contrast and saturation droppoff when you move beyond a certain angle. Sure, you can still watch but at a reduced picture quality level.
No, it's just that the levels were not as good as people make them out to be. There was always a noticeable glow on the Sony when displaying a blank screen which is was more apparent then the 700u.
Ok, I should have said equal wrt to color gamut and shadow detail. However just as plasmas vary in quality so too did CRT and most pople are not upgrading from a top of the line CRT. Pick up a quality Plasma and I don't see how any reasonable person would miss their old CRT.
I'm not sure how this whole love for CRT technology got started but it's comical at this point.
Forget about the Kuro, and realize that a properly calibrated quality Plasma blows away a CRT in just about every category. Besides with respect to black levels, the majority of CRT's were...
Sure there is the cut aka shape of the diamond but cut (when talking about the 3 C's) refers to the quality of the cut. This is determined by the skill of the stone cutter and many factors are considered when cutting the diamond. An excellent cut round will in general look better than an...
Similar thing happened to me when I parked a good chunk of money shortly for a 20% down payment on a condo. A banker personally called me in for a meeting to discuss my financial goals and strategy. I told him it was just for a down payment and would be gone shortly. He was still cordial but...
I read his post and I'm not really why he stated the situation in the manner that he did. It is not uncommon to receive 110% financing. There is really no need to defraud anybody. He is probably legally entitled to spend that money in any fashion he sees fit.
I have to wonder about the...
Another issue which jumps out at me (among a host of others) is that taking out 110% to pay student loans puts you upside down in the mortgage. That means you have no way to sell the apt w/o coming up with 10% of the purchase price. If the apt drops in value, you are screwed and need to pay...
Technically, you buy shares of a co-op. You don't really own your apartment.
You buy and own your apartment in a condo and have shares in the common elements.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.