Search results

  1. Question Dell UltraSharp U2713HM HMDI Output Limit

    You were right. the dsp port can do 2560x1440@60hz ! i will upgrade my gpu and use the dsp :) thx!
  2. Question Dell UltraSharp U2713HM HMDI Output Limit

    No, the monitor port simply does not support it. I also read other forums about it. I'm pretty much sol unless I can find a rtx with DVI I will not be able to get full res . So a new monitor is best in my situation.
  3. Question Dell UltraSharp U2713HM HMDI Output Limit

    It has DVI, DSP,HDMI however the HDMI is limited to just that, 1920*1080 and the DSP is limited to 1920*1200 which stinks. I read some forums people doing what you suggested with a converter and it does not work well. I'm hoping to get a new screen all together that HDMI supports a much higher res.
  4. Question Dell UltraSharp U2713HM HMDI Output Limit

    hey guys. i need some help with this one. my Dell U2713HM apparently doesn't support a resolution higher than 1920/1080 16x9. However the DVi in-put supports up to 2560x1440. I am looking to get a new GPU but i will not be able to achive anything higher using HDMi. The GPU i am looking for is...
  5. Need Best Wireless Keyboard for Gaming

    Stay away from wirelessly for games on both mouse and keyboards.
  6. What's a good Bluetooth mouse that doesn't cost a fortune?

    If your going to use it for games, don't waste your money. You will experience lag. Wired is best imo.
  7. i7-2600K Over Clocking Help

    Organik, Thanks all for your help, I been following YT videos and advise from here. Another thing is i reset my BIOS to default but in OCCT it is reporting 4.4, with a 30% OC, why is this? killster1 i will have to find the time to do this next week and retry, I'm also trying to figure out the...
  8. i7-2600K Over Clocking Help

    I got the same error message at 4.2. I think my CPU FAN is not good enough? My other question was, is it really a difference from stock 3.4 to 4.2/4.5?
  9. i7-2600K Over Clocking Help

    Sorry guys, i been busy. I tried this again and used OCCTPT, it gave me a bunch of errors. My CPU fan is like the double sided one by CoolMaster 212 I believe (it has 2 fans). I got it over 5 years ago so I'm not sure the model exactly but it looks like that. But here are all the images...
  10. Dell Laptop Pluged in But No Charge

    Okay. I'll have to order a new one of both then.
  11. Dell Laptop Pluged in But No Charge

    So today i went on my laptop was playing Lumines, i did not have it plugged in, it said battery is 73%. 15mins later the battery warning came up saying it's going dead so it dropped to 7% rapidly. I have it plugged in now it says charging and the battery light is on. Another strange situation...
  12. Dell Laptop Pluged in But No Charge

    Yea, Very strange it's working suddenly. Gotta love electronic stuff.
  13. Dell Laptop Pluged in But No Charge

    Hey just an update. I turned my laptop on and the battery went from 33% to 100% idk what is making it work suddenly I just left it on for 4hrs lol. Took the plug out and put back in, and it's detected it connected and says it's charged 100% battery.
  14. Dell Laptop Pluged in But No Charge

    Yes contacts are clean and snug when plugged in.
  15. Dell Laptop Pluged in But No Charge

    No this second battery I got from someone with the same laptop to test on mines.
  16. Dell Laptop Pluged in But No Charge

    This is the battery. https://imgur.com/a/pW09rU2
  17. Dell Laptop Pluged in But No Charge

    Hi, it's a Dell Latitude 3330 the PSU is original. I tried another battery when i plug in the PSU, the battery light comes on for a second then goes away. So that did not work at all :-(
  18. Dell Laptop Pluged in But No Charge

    I will try another battery tomorrow and see if there is a difference. I will report back.
  19. Dell Laptop Pluged in But No Charge

    Hi, so i'm having a problem with my Dell laptop. When I plug it in it doesn't go on to charge. It just says Plugged in, not charging. It sometimes goes into charge but quickly stops, I googled it and tried a few things. Removed the battery to see if it works with just PSU, it does work...
  20. i7-2600K Over Clocking Help

    So i guess i've OC'd to 4.5GHZ Although windows still showing 3.4ghz. During my Burn Test, it shows 4.4ghz in CPU-Z but my "real temp" seems high it's in the late 80's. Will it be stable and ok? https://imgur.com/a/EWo40dl https://imgur.com/a/Rr9Mdh3
  21. i7-2600K Over Clocking Help

    Thanks m8 thats what i need haha.
  22. i7-2600K Over Clocking Help

    Sorry i didn't get notifications people have responded to my post here. So here are some screen caps of my BIOS. I've not yet adjusted anything, where do i make changes as suggested? https://imgur.com/a/S29Hhmx
  23. i7-2600K Over Clocking Help

    Wondering if I can OC it. I have a pretty good heat sink and many fans inside the case. I'm a newb and need basic steps. Thank You! Intel Core i7-2600K 3.4GHz Asus P8Z68-V Pro/GEN3 Memory DDR3 16
  24. Raspberry Pi3B USB HUB - HDD Help

    Yeah, i will pass though bc it's not a big difference. I am still thinking about the Shield or I will buy a cheap laptop with HDMI output. That will play everything for sure and then some.
  25. Raspberry Pi3B USB HUB - HDD Help

    I'm getting a bit annoyed with Pi3, I'm ready to ditch it for Nvidia shield or something. Pi is just too slow and i hate all these wires just to power-up a HDD. Does the shield work well with simply connecting the HDD USB?
  26. Raspberry Pi3B USB HUB - HDD Help

    Thank you for the response. I will take a look at this shortly.
  27. Raspberry Pi3B USB HUB - HDD Help

    Hey guys. I have OSMC setup and with my new 2.5' HDD (Western-Digital-Passport-Drive-USB-3-0-WDBYFT0030BBK-WESN). I have a problem where it keeps crashing the OSMC with the blue-screen sad face randomly. From what I gather it is a power-insufficient issue. Looking at my PI's power supply it says...
  28. Asus V500c LCD Wire Replacement

    No other pointers out there?
  29. Asus V500c LCD Wire Replacement

    Yes the WiFi just snaps in. but that touch controller is not required. the ebay posted links are not the wire i need. it is different connectors. i don't need to replace that WiFi board either. If i unravel the wire I bet I can separate the WiFi wires possibly. Any other suggestions because I'm...
  30. Asus V500c LCD Wire Replacement

    Thanks for the response. I thought I had posted a link to the image, I guess not I apologize. Here is the one I've circled it in red I hope you can make that out, I'm not good at this lol. http://i64.tinypic.com/2yl61dv.jpg The part on the right side goes into the BT/WiFi card. You can also see...
  31. Asus V500c LCD Wire Replacement

    Please if someone can direct me I need the laptop really soon to be working .
  32. Asus V500c LCD Wire Replacement

    Hey guys. I have this laptop and due to the location of this wire, over time open/closing the screen caused this wire to wear and tare over time. So I'm in search for a replacement wire but all I can find are ones for other models. There is no serial or part number on the wire itself. So I'm...
  33. Asus P8Z68-V Pro GEN3 & Zalman Z9 Front Panel

    ohh, i will use the HD one then, Thanks Again!
  34. Asus P8Z68-V Pro GEN3 & Zalman Z9 Front Panel

    Okay i got it finally, I plugged the AC'97 part into AAFP pins and it worked. There's is an HD Audio one too i'm assuming that's for the MIC.
  35. Asus P8Z68-V Pro GEN3 & Zalman Z9 Front Panel

    Just a quick question. My case has a front-panel which has a wire for it's audio hook-ups (Mic & Headphones). I got all the USB ports going in the front just stuck with these audio options. If someone can tell me which area i need to plug it into on this motherboard, I would greatly appreciate...
  36. PC Locking Up

    because the CPU heated up on load, i suppose? :rolleyes:
  37. PC Locking Up

    ahh okay. esp at boot it wouldn't be going exactly fast anyhow. Thanks.
  38. PC Locking Up

    AnonymouseUser, I just get an error message during my BOOT up. It says my CPU fan is going at 573rpm which is below the 600rpm thresh hold. Is this normal?
  39. PC Locking Up

    Yeah they were re-installed LOL! I actually had to remove the side panel fan because for some reason it was very noisy there, so i put it at the front and it's silent there. EDIT: I just installed a 2nd fan, so now there are 2 fans on the heat sink. The only problem is the power source is not...
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |