Search results

  1. I

    rant: warranty refused by intel

    What is written on that IC? If You can get the spec pdf off the web, then we may be able to help the broken part was connected to pin 20. Also provide Motherboard model number too.
  2. I

    Motherboard suggestions for core i5 750.

    This only happens if You are using Sata3 and/or USB3. If You are not using that feature then the pcie still stays at 16x I was all set to buy Gigabyte but thought if I used Sata 3 or USB 3 I would be at a disadvantage, which is why I bought Asus in the end. You cannot easily get Asrock, Biostar...
  3. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    I've now upgraded my trusty Asrock to a new i5 750 and 5850 video card system, all the weird quirks I had are now gone. like ctd's in certain games, also not being able to play dvd movies on any operating system including Linux Ubuntu. Nevertheless the Asrock will live on in the spare computer...
  4. I

    Motherboard suggestions for core i5 750.

    Having done tons of research over the last week I have decided on the Asus P7P55D-E PRO for my New build with I5 750. Only 3 mobo brands here in Australia unfortunately and here is what I found. Gigabyte boards have USB3 and SATA3 but if you use that feature Your PCI-ex x16 slot reduces to 8x...
  5. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Pretty certain Temp 1 is Motherboard temp, Temp 2 is cpu temp, as in not core 0 or 1. JediJosh, it is the Rialto that has to convert pci-express data to AGP data so the mobo can understand it, these video cards are all native pci-express design, so require the rialto for conversion. I would...
  6. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    That is the same issue I had after installing my system, screen going off to standby during games. Could be that the Rialto PCIexpress to AGP Bridge IC on top of the card is getting too hot, a problem I did not have with the Video card in my old computer due to a weaker cpu unable to push the...
  7. I

    asrock 4coredual-sata2 r2.0

    http://www.pctreiber.net/filebase.php?lim=40&cat=143 Use that bios there, You will need to update it in Dos mode though.
  8. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    This mobo supports a max of 266fsb (1066)
  9. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    These mobo's work best with ddr2 that runs at 1.8v, You could try in bios putting the dram voltage to max though, I think is 2.0v. Manually inputting the ram timings is a good idea too. From what I have learn't reading the forums here, these boards and ddr2 can be a bit of hit and miss, You...
  10. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Finally sorted my password issues here. I have two 1 TB harddrives running on my mobo, the first is a Samsung HD103UJ, and the other is a Seagate ST31000528AS. Both have no probs whatsoever, I run XP on the Samsung, Windows 7 on the Seagate, and on a 200GB ide I have Linux Ubuntu 9.10. I...
  11. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Taranscorp, just about all Mobo's offer a FSB number that is way higher than what they can actually deliver. The PT880 PRO/ULTRA chipset is not capable of more than 300fsb thereabouts, which is precisely the reason why these motherboards do not accept any 333fsb processor, dual or quad. If...
  12. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Interesting, I forgot about that obviously, but I have two 1TB hdd's on the sata connectors and one IDE drive, as well as two IDE burners. I have had no problems with the USB at all with V-link on normal or fast, currently fast, but that was only due to Vista64 having freezing probs, I haven't...
  13. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    The FSB on these motherboards is not capable of much better than 295 no matter what You do, as an example I managed to boot my e5200 at 3.7ghz the other day, 297x12.5, Windows 7 bluescreened in a short time, but at 295x12.5 was ok. You may get more stability by vid modding Your cpu for about...
  14. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Krusty. Unfortunately (fortunately really) I have not had Your USB drive issue, and have had no problems copying files larger than 10Gb back and forwards. I would suggest You use Everest to log temperatures and see if the 5v rail is low, possible PSU issue, 450w PSU is getting a bit low for...
  15. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    You need to run Coretemp to find Your processors default Voltage (mine is 1.1625v), then get the intel e5200? spec sheet (pdf), and You have to work out which pins need blocking or shorting to ground based on the voltage chart provided in the spec sheet. Processor's use a different default...
  16. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    E5200 Bsel and Vpin info as requested here.. http://www.ocforums.com/showthread.php?t=586596 http://forums.guru3d.com/showthread.php?p=2933913 TaranScorp, Your e7500 overclockis as good as it will ever get, on this mobo anyway, as the FSB maxes out on these chipsets under 300.
  17. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    PrTv1980, try putting Vlink speed to fast and see if that helps. I am having no probs like that with Win7.
  18. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    The Rialto bridge IC on my card has a heatsink on it, which together with a pencil mod for 1.4v, allows up to 891mhz on the core, I only use that for benchmarking though. And PrTv1980, I would still suggest You put your ram on 2.0v for stabilities sake. You never mentioned whether or not You...
  19. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Just found this info about Ram voltage relating to DDR2 and DDR1 DDR2 high = 2.0 volts, normal = 1.9volts and low = 1.8volts. DDR1 high = 2.7 volts, normal = 2.6volts and low = 2.5volts. AGP volts is the same as the Northbridge IC volts, so put that to high. Also I had to put Vlink speed...
  20. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    I just installed Windows 7 (64 bit) last week, and so far no problems whatsoever. I am using the standard Windows 7 chipset drivers, they seem fine. Latest Realtek Sound drivers and ATI'S latest 9.9 Radeon which my HD3850agp works ok with. Win 7 installed it's own drivers for the network...
  21. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    The Quiet fan setting is for the cpu temperature, not the individual core temps. I suggest You set it at 40C as I have, works great at that setting, mostly only speeds the fan up during games. Try running Memtest from Hiren's boot cd, that will accurately whether or not Your Ram is an issue...
  22. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Normally most motherboards just give a "Unknown Processor" at boot screen when You have an older bios version, rather than no boot. That may not be the case with these mobo's however. I updated mine to the latest 3.17a last night, just used Hiren's boot cd, went into Dos and ran the files...
  23. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    For everyone's information, the latest version of Everest correctly measures the +12v rail on the 4coreDual Sata II Not sure about the Vsta model.
  24. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    Ramstein, You said You tried everything, does that include the latest bios?
  25. I

    Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

    To the best of my knowledge whatever Pci-e card You run will be limited to about the performance level of my HD3850, due to the 4x limitation, so unless You plan on putting it into a more powerful computer at some point, stick with a cheaper card.
  26. I

    Asrock 4CoreDual-SATA2

    From what I can remember reading back through this thread, 677 is as good as it gets with ddr2 ram, so with a 1066fsb processor, I would suggest You enable the flexibility option and go for the lowest timings possible. I think some people also had to settle for 533mhz. I am using 2x 1gb...
  27. I

    Upgrading from P4 to Core 2 Duo

    If that is Just the standard Truepower 430w PSU, don't expect it to handle what You are going to expect of it. Maybe the trio model might cope. According to Antec's website Your PSU has a single +12v rail of 20A only, probably not enough. My old Antec 500w Smartpower 2 couldn't handle my...
  28. I

    Asrock 4CoreDual-SATA2

    I would imagine the only reason to go ddr2 800 over ddr2 667, both 1.8v, would be that You might be able to get the ddr2 800 to run at lower latencies. I cannot imagine You had a high power AGP card with a p3 1g, so why not just get a pci-express motherboard and video card as the...
  29. I

    Asrock 4CoreDual-SATA2

    I bought my board last year and had no problems with the E5200. If You are going to BSEL mod the e5200 make sure You set it to about 1.36v by modding the pins. You have to know the chip's default voltage (VID) to do this, use coretemp. Alternatively get the e5300 or e5400 as they are RO...
  30. I

    Sapphire HD 3850 AGP Card

    My old system had the Powercolor HD3850 with P4P800 dlx and a CT479 Pentium M adaptor, with Pentium M 740 @ 2.72GHZ. Even that was bottlenecking the Video card, a max 3dmark06 of about 7700. My current rig with same video card did a best of 12010, now I am Video card bottlenecked.
  31. I

    Asrock 4CoreDual-SATA2

    This is the best my computer did, with Powercolor HD3850 agp @891/990, and e5200 @ 3632mhz 3DMark06 Score 12010 3DMarks SM 2.0 Score 5098 SM 3.0 Score 5449 CPU Score 3193
  32. I

    Asrock 4CoreDual-SATA2

    I run 2 Gig, which suits XP perfectly well. For Vista just tweak the snot out of it.. http://tweakhound.com/vista/tweakguide/index.htm
  33. I

    Asrock 4CoreDual-SATA2

    Yes except still using 2gb ddr1 ram what are Your questions?
  34. I

    AGP Video Card Recommendation?

    If You can still find one, get a HD3850, it is still the most powerful AGP card, and has a 256bit memory bus as well as DDR3 as opposed to the HD4650 with DDR2 and a 128bit memory bus.
  35. I

    Asrock 4CoreDual-SATA2

    If the Keyboard is USB, then make sure legacy is set to Auto or On in the bios.
  36. I

    Asrock 4CoreDual-SATA2

    I fixed the Vista Freezing problem, and just as well as I was considering upgrading to a better mobo. The problem was caused by the VLINK setting in the bios. it was set to normal. Setting it to high has fixed it, now everything running smoothly. Got a 3DMark Vantage score of P4475 with...
  37. I

    Asrock 4CoreDual-SATA2

    Anyone here running Vista 32 or 64 with a HD3850 AGP? I have major issues with freezing in games, basically it freezes, then between 1/2 a second and 20 seconds the game continues, it will repeat this over and over again, and is the same in 3dmark 06 and the X3 Terran conflict rolling demo...
  38. I

    viewsonic and samung 120hz monitors, 120hz and understanding refresh rates.

    When they have completely eliminated Motion blurring from LCD displays, then they will have something worthwhile to brag about.
  39. I

    Best AGP Video Card? ATI? NVIDIA?

    No Probs, sorry I missed this before Your PM. http://img520.imageshack.us/img520/6212/img0591r.jpg I modded the GPU to 1.4v by doing a pencil mod, because my card is a powercolor it has a better cooler to start with, so temps are not a problem, about 70 is the max. I used 4 small dobs...
  40. I

    Asrock 4CoreDual-SATA2

    http://forums.guru3d.com/showthread.php?p=2933913 The conductive silver in the lower right of the cpu forces the 266fsb, the voltage pin mod You will have to work out yourself based on the default voltage for Your cpu, which coretemp will accurately show, then use the Intel datasheet to...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |