Search results

  1. Battlefield 3 official performence/fps thread

  2. Sli 570 vs CF 6950 2560x1600 gaming

    I run GTX 580s for my 2560x1600 monitor and I often run out of VRAM (1.5GB) when pushing settings up on modern games....I'd suggest getting 2GB+ cards ;) For instance in BF3...my cards have plenty of power to run Ultra settings at 2560x1600, but I must lower MSAA to x2 or else I run out of VRAM...

  3. The most extreme mini-ITX gaming rig you've ever seen - MAX11Lv3

    @ Zap, I used an adaptor...like this: http://www.amazon.com/StarTech-com-2.../dp/B001OFNLXI

  4. The most extreme mini-ITX gaming rig you've ever seen - MAX11Lv3

    In the 1st version, I was using air cooling and had an optical drive included ;) Placing it at the bottom wouldn't work due to the length of the optical drive obstructing the motherboard mount :(

  5. The most extreme mini-ITX gaming rig you've ever seen - MAX11Lv3

    Thanks :) but you're the first :sneaky: They both reach around the same temps, but they do not maintain the same temp all the time. Make sure you check out the OP of my build log for ideas on your SG05 build. This is the 3rd SG05/06 I've built, part one or two might be helpful to you.

  6. The most extreme mini-ITX gaming rig you've ever seen - MAX11Lv3

    I just finished a build I've been working on for a customer. He requested a system to fulfill these requirements. small lightweight very powerful unique cutting edge gaming performance If you like what you see here, be sure to check out the full build log for details :) This is...

  7. Just finished my desk build

    ^Thanks :) Thanks :sneaky: Nope....but the pump could be a bit quieter....I'm slightly disappointed with it. I might eventually switch to a couple 655s ;)

  8. Just finished my desk build

    Thanks again guys :)

  9. Just finished my desk build

    I have no doubt if I spoke the language, Iwould be able to track down nice woods. But I only went to the local hardware stores (three to choose from, all had the same supplier). I recreated the door three times at a cost of more than $20 each. If it had been nice wood, the price tag could...

  10. Just finished my desk build

    This was the best I could do with my local supply....I wasn't too happy either. But someday I'll move back into the real world where I can get better stuff and I'll rebuild :cool: FYI - I live in northern Japan ;)

  11. Just finished my desk build

    Thanks again guys :).....especially from you kier, cheers.

  12. Just finished my desk build

    It's been in the works for a few months, HW list ins in the build log linked in the OP :thumbsup: You are correct, it says "water" on the top, and "wood" or "tree" on the bottom. Nice idea, but not asthetically pleasing. Plus, the current filters being exposed means their easy to clean...

  13. Just finished my desk build

    I just finished my build "Water & Wood". You can see all the details in my worklog. I'm pretty happy with the results, a very powerful yet peacefully quite gaming rig.

  14. Case size comparison chart

    You can put it in any ATX case :thumbsup: Thanks Sunny :)

  15. Case size comparison chart

    Ah, good catch on the ISK-100....fixed :)

  16. Case size comparison chart

    Thanks T Yamamoto....does anyone else find this helpful? Or am I wasting my time?

  17. Case size comparison chart

    I wanted to create a place where you can easily reference and compare various case sizes. So, I've created this simple spreadsheet with tabs for various case sizes from smallest to largest. If there is a case you think should be added to the list, please post up the dimensions, and a link to the...

  18. Solid State Workstation

    What kind of power does it need....what do you plan to use it for?

  19. Brazos Testing Requests

    Sorry to be OT but... Is that really your current rig?

  20. 3 Step Overclocking Guide – Sandy Bridge – v0.1beta

    Thanks Copenhagen69 :)

  21. How to overclock your Nehalem (Core i7)

    yup...Stop the posts or you will be banned Markfw900 Anandtech Moderator I've just finished a new guide for Sandy Bridge :) But you guys can't have the link, because they'll probably say I'm spamming again :P (PM'ed the link to the thread starter for addition to the OP)

  22. How to overclock your Nehalem (Core i7)

    Edited for prohibited content Markfw900 Anandtech Moderator

  23. New Silverstone SG05/06 case with black interior & 450W PSU

    Yes, it was a PITA...but doable. There are some 5850 (non reference) cards with the power connectors on top....if I had to do it again, I'd get one of those.

  24. New Silverstone SG05/06 case with black interior & 450W PSU

    Only $112 at Amazon http://www.amazon.com/SilverStone-SG...8113854&sr=8-2 SG06 version for $134 http://www.amazon.com/SilverStone-SG...8127891&sr=1-1

  25. New Silverstone SG05/06 case with black interior & 450W PSU

    I put a 5850 in mine without modification, and a 480 GTX in mine with some minor modding....check the link in the OP :)

  26. New Silverstone SG05/06 case with black interior & 450W PSU

    If you had not seen MAX11L you should check it out...a lot of people commented they wished Silverstone would make a version like it. Well, they have! Check it out! http://www.silverstonetek.com/products/p_contents.php?pno=SG05-450&area=usa

  27. MAX11L - mini-ITX gaming monster

    No....I just cut up the backplate to make it work.....took about 30 seconds ;)

  28. MAX11L - mini-ITX gaming monster

    quad core at 4.2GHz.....480 GTX at 800/1000....more details here: http://www.techreaction.net/2010/09/24/gaming-in-tight-spaces-part-2%e2%80%93-max11l-featuring-corsair-and-gigabyte/ ;)

  29. MAX11L - mini-ITX gaming monster

    Obviously, I've swapped the location of the fan/rad....but this still shows accurate clearance ;) Thanks :)

  30. MAX11L - mini-ITX gaming monster

    If you like my build, vote for me :) http://www.evga.com/ModsRigs/detail.aspx?BuildID=15162

  31. MAX11L - mini-ITX gaming monster

    Some of you have seen this around the web. I never posted the build log here, but you can check it out if you like (linked in my sig). Here are the final pictures :cool: "It's like a console...with the suck turned down and the awesome turned up" -tet5uo

  32. [challenge] Highest power density possible for gaming

    See post #12 :) (it's showing AC power draw from the wall) .....I'm well within spec ;)

  33. [challenge] Highest power density possible for gaming

    Well....until that day come [rolleyes] I'm enjoying the power this system does have :D BTW - I could care less about TDP ratings....I'm running my i5 750 at 4GHz and 1.4V now which means it's actual TDP far exceeds Intel's 95W figure ;)

  34. [challenge] Highest power density possible for gaming

    Thanks woman ;)

  35. [challenge] Highest power density possible for gaming

    Thanks man :)

  36. [challenge] Highest power density possible for gaming

    No, it's a gaming rig (and the components' value is closer to $1600 ;)).....and I've been gaming on it for weeks without problems. If I had built it to play Furmark with postproccessing, then I'd have to agree with you. While performing the FurMark testing, I was nearing the limits with 520W...

  37. [challenge] Highest power density possible for gaming

    It was a joke ;) I didn't actually buy two sets [rolleyes]

  38. [challenge] Highest power density possible for gaming

    I bought an extra set that I leave at the remote gaming site with some of the money I saved NOT buying an Alienware :D

  39. [challenge] Highest power density possible for gaming

    I believe I've created the most powerful gaming rig ever considering the size.....this build is less than 11 liters in volume but packs mega power for gaming. Silverstone SUGO SG05 Silverstone ST450SF 450W SFX PSU Gigabyte H55N-USB3 Intel Core i5 750 @ 4.2GHz Corsair H70 CPU cooler...

  40. Need some pro help to understand what I'm doing here with voltages and my overclock

    Hopefully he won't need that much VTT with those lower mem speeds and only dual channel. I'm running an almost identical setup right now and I only need 1.21V VTT....I blogged about the setup here...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |