Search results

K
My computer is screwed - Help

Well, I forgot to hook my boot drive back up, so that was the problem. However, my Radeon X800XL still does not work. I was using it in the bottom PCI-E slot, and so I tried moving back up to the original top PCI-E slot, but that didn't make any difference. So, I think I need to send my video...
- kento46
- Post #5
- Aug 11, 2005
- Forum: Computer Building
K
My computer is screwed - Help

To reset the bios, I removed the battery, and moved the jumper into the reset position. It was supposed to be "wouldn't." When I installed the PCI video card, the monitor turned on and went to the colorful DFI Lanparty screen. This was previously working. I thought it might be the...
- kento46
- Post #4
- Aug 10, 2005
- Forum: Computer Building
K
My computer is screwed - Help

Bump
- kento46
- Post #2
- Aug 10, 2005
- Forum: Computer Building
K
My computer is screwed - Help

Ok, when I turn my PC on it goes to the DFI screen and then doesn't do anything. I reset my BIOS and that didn't seem to help. I took out the video card and put in a PCI video card because with the video card in it would even go to Mobo screeen. My specs are: DFI nForce4 Ultra-D Rosewill...
- kento46
- Thread
- Aug 10, 2005
- Replies: 4
- Forum: Computer Building
K
Please Help - Computer won't turn on

Ok, my computer was sitting in my room, it's been running fine for a few months now. A couple hours ago, I tap the front of the case with my foot, and everything just shuts off. I tried turning it back on and nothing happened. So I turned the power supply off and back on and tried again. This...
- kento46
- Thread
- Aug 10, 2005
- Replies: 3
- Forum: Computer Building
K
Problem with the budget PC I just built my dad...help please

You guys are awesome. I went to 2 other boards before I went to you guys and you guys were the only ones who knew what to do.
- kento46
- Post #7
- Jul 31, 2005
- Forum: Computer Building
K
Problem with the budget PC I just built my dad...help please

Jumpers in the motherboard? How do I do that?
- kento46
- Post #3
- Jul 31, 2005
- Forum: Computer Building
K
Problem with the budget PC I just built my dad...help please

All the lastest drivers are on it and the BIOS are up to date. Specs: Motherboard: ASUS A7V8X-MX SE Socket A (Socket 462) VIA KM400 Micro ATX AMD Motherboard - Retail Processor: http://www.newegg.com/Product/Product.asp?Item=N82E16819104210 RAM...
- kento46
- Thread
- Jul 31, 2005
- Replies: 7
- Forum: Computer Building
K
80mm Case Fan Recommendations?

I'm not really concerned about them being silent I just want really good air flow.
- kento46
- Thread
- Feb 27, 2005
- Replies: 1
- Forum: Computer Building
K
Fortron 530W vs Fortron Blue Storm

Well I was going to get the Blue Storm too but a lot of people on other forums that I've asked says it doesn't hold it's Rails well.
- kento46
- Post #3
- Feb 19, 2005
- Forum: Computer Building
K
Fortron 530W vs Fortron Blue Storm

Which would you suggest? http://www.newegg.com/app/viewProductDesc.asp?description=17-104-968&depa=0 or http://www.newegg.com/app/viewProductDesc.asp?description=17-104-934&depa=0 I figure I can't get a better PSU for the price. 90 dollars is the most I'd ever pay for a PSU.
- kento46
- Thread
- Feb 19, 2005
- Replies: 2
- Forum: Computer Building
K
I need a new PSU.

http://www.newegg.com/app/ViewProductDesc.asp?description=11-129-115&depa=0 That's the PSU I have right now that came with the case. However, add in a TV tuner to the stuff in my sig and that's my system. My PSU I think it's dying because the voltage on all of my parts started dropping after...
- kento46
- Thread
- Feb 19, 2005
- Replies: 1
- Forum: Computer Building
K
Why 2 monitors?

I have 2 monitors one I use as a TV essential to go along with my Sapphire 550 Theatre chip, and the other I use for everything else.
- kento46
- Post #19
- Feb 15, 2005
- Forum: Computer Building
K
Challenge: build the absolute cheapest computer you possibly can.

Here is the PC I did for 253 which works great for my dad's needs and it's great for the price: Case with PSU: http://www.newegg.com/app/ViewProductDesc.asp?description=11-129-150&depa=0 Processor: http://www.newegg.com/app/ViewProductDesc.asp?description=19-104-210&depa=0 RAM...
- kento46
- Post #12
- Feb 15, 2005
- Forum: Computer Building
K
s939 3400+ vs. s754 3400+

I can get a s939 3400+ and an Asus A8V for $280(after rebate) or a s754 3400+ and a DFI lanparty NF3 for $338. I am wondering which one I should go for. I figure I can overclock more with the DFI and 754, but I could be wrong. What do you reccommend? (Please don't rant about how I should get...
- kento46
- Thread
- Feb 14, 2005
- Replies: 6
- Forum: Computer Building
K
cpu HELP!

Taking off the CPU heatsink, taking out the processor, sticking the new CPU in, and then put the fan back on top.
- kento46
- Post #2
- Feb 13, 2005
- Forum: Computer Building
K
Whenever I restart my computer I get these weird Messages.....

http://www.geocities.com/kento46/Error1.JPG http://www.geocities.com/kento46/Error2.JPG http://www.geocities.com/kento46/Error3.JPG Those are the 3 error messages I get. I like cool n quiet but I'm concerned that it's more than just this. I've reinstalled cool n' quiet numerous times to...
- kento46
- Post #2
- Feb 7, 2005
- Forum: Computer Building
K
Whenever I restart my computer I get these weird Messages.....

I get these error messages especially with MSI core center like my Motherboard isn't compatible. And stuff like it failed to load. I don't know what's going on. Then I start MSI CoreCenter like 2 seconds later and everything is fine. Games are completely fine it just happens when I reboot. Specs...
- kento46
- Thread
- Feb 7, 2005
- Replies: 2
- Forum: Computer Building
K
I think the 2 power surges yesterday did something to my PC.

3d Mark 05 score actually went up 5. So, I guess its all PSU or just case fans.
- kento46
- Post #6
- Feb 2, 2005
- Forum: Computer Building
K
I think the 2 power surges yesterday did something to my PC.

I'm going to run 3dMark 05 right now see if that's any different. If it is my PSU, first off I'm going to cry. Second off I'm going to call the damn electric company and complain and bitch at them util they pay me for a new one.
- kento46
- Post #5
- Feb 2, 2005
- Forum: Computer Building
K
I think the 2 power surges yesterday did something to my PC.

Yes, and I did. I looked at my PC and I found the problem. Two of my Case fans are blown out. Well not completely, they just spin really really slow. Case Fan or Wires going to the Case fan? I would think Case Fan. Also, my vCore is .06V lower than usually. It's running at 1.35 - 1.36 instead...
- kento46
- Post #3
- Feb 2, 2005
- Forum: Computer Building
K
I think the 2 power surges yesterday did something to my PC.

Yesterday, the power at my house went out twice. Once for like 2 seconds and then other time for like 10 seconds. I turned on my computer again after the 2 second one and then the 10 second one took place. I decided to leave it off for a while so I turned it back on at like 9 at night. I'm...
- kento46
- Thread
- Feb 2, 2005
- Replies: 5
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

Bump.
- kento46
- Post #33
- Jan 14, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

Well, ok the problem isn't fixed. Unistalling the drivers simply lessened the amount it is off center. Now it's only a little bit after coming to my destok from games, or sleep mode or changing resolutions. Any ideas?
- kento46
- Post #32
- Jan 13, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

I fixed it WOOT! All I did was unistall my monitor drivers and for some reason the screen stays center now!!! Now should I install my drivers again because I think I know what the problem is I already had monitor drivers and then I updated to the new ones without unistalling the old...
- kento46
- Post #29
- Jan 12, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

I'll try it. Thanks.
- kento46
- Post #28
- Jan 12, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

I have 3 80mm fans. And, everything is at stock.
- kento46
- Post #26
- Jan 12, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

I was wondering since you guys have a picture of what my power looks like are my rails and power ok? Would you do anything to change them?
- kento46
- Post #24
- Jan 11, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

Harvey what do you mean can you explain yourself more. What is the software? Do you want me to change to every resolutions and change the settings?
- kento46
- Post #21
- Jan 11, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

http://www.newegg.com/app/View...=24-002-037&depa=0 Yes it can.
- kento46
- Post #20
- Jan 10, 2005
- Forum: Computer Building
K
SLI Benchmarks

From what I have seen most GT sli's get around 10K in 3dmark 05 granted both cards are OC'd.
- kento46
- Post #6
- Jan 10, 2005
- Forum: Graphics Cards
K
Refresh Rate Problem with PC please help me.

Just tried it. I switched my resolution and once again the problem.
- kento46
- Post #17
- Jan 10, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

http://www.geocities.com/kento46/monitor.JPG There is mine. If I override it doesn't help the thing. I had it set to 85 but that didn't help. The fixer sets my refresh rates right now it's set to 85.
- kento46
- Post #14
- Jan 10, 2005
- Forum: Computer Building
K
6,034 3DMark05 X800 Pro 12 Pipe

http://img17.exs.cx/img17/6302/scores11508gp.jpg http://img17.exs.cx/img17/5408/scores1513004rj.jpg http://img103.exs.cx/img103/34...s301396averages9sv.jpg In case you were wondering.
- kento46
- Post #9
- Jan 10, 2005
- Forum: Graphics Cards
K
Refresh Rate Problem with PC please help me.

Well I can try Monitor becuase I do have an extra lying around but video card is a problem. Should I unistall my drivers for my monitor before switching yes right?
- kento46
- Post #11
- Jan 10, 2005
- Forum: Computer Building
K
6,034 3DMark05 X800 Pro 12 Pipe

Thats insane I only get 5693 with my X800 XT but that's at stock. And, most XT's don't get 6000 unless they are OC'd. They had a benchmark post on HardOCP and I got the highest stock XT on there. Most XT PE's get 6000 without OC.
- kento46
- Post #8
- Jan 10, 2005
- Forum: Graphics Cards
K
Refresh Rate Problem with PC please help me.

Yes and everything is up to date. I run Spyware and Ad-aware regularly. I have spy blaster. Everything is stock so nothing is OC'd. Could a be a phyiscal defect? Could it be something having to do with the power? My 3dmark 05 score is 5693 thats why I don't want to say its the video...
- kento46
- Post #9
- Jan 10, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

http://forums.anandtech.com/me...487937&STARTPAGE=1 Basically posted here because someone told me you guys could offer more help.
- kento46
- Thread
- Jan 10, 2005
- Replies: 0
- Forum: Graphics Cards
K
Refresh Rate Problem with PC please help me.

Just purchased maybe early December if I remember correctly. Do you think video card or Monitor problem? Also, thank you so much for trying to help this post has gone on HardOCP, IGN, and here and you are the first one to respond to it.
- kento46
- Post #7
- Jan 10, 2005
- Forum: Computer Building
K
Refresh Rate Problem with PC please help me.

Latest official version. What is it 4.12? I think thats what it is. I'm using just the control panel version not the crappy catalyst.
- kento46
- Post #5
- Jan 10, 2005
- Forum: Computer Building

RESOURCES

Top Bottom