Search results

  1. I

    Chipset cooler recommendations?

    Does Enzotech SLF-1 or CNB-S1L fit the DFI Lanparty NF4-D board? The stock one is getting very noisy lately and definitely need replacement. Unfortunately the Evercool VC-RE isn't available in my area so I need to look for alternatives. I saw the Thermalright HR-05 SLI which might fit but...
  2. I

    Active Directory Monitoring

    Have you tried looking into the security logs of your domain controller? (e.g. Right click on MY COMPUTER and click MANAGE) It should be classified as "Account Management" in the Category field, with Event ID's of 641 and 632.
  3. I

    Cheap 550W PSU or expensive 450W?

    Get a quality 350W-400W PSU, just to name a few, Fortron (or SPI in some places), Enermax and Antec. If you're overclocking, a 450W is recommended. Most of those cheapo PSU are over-rated, so don't always believe what it says on the specification. When buying a PSU, brandname does matter. A...
  4. I

    Can you use a stock Duron HS/Fan on an XP?

    loopy, are you overclocking on a budget? :D No, I don't think it's a good idea to use that HSF on a Barton 2600+. According to the AMD technical documents, the maximum thermal power of a Duron 800MHz and Barton 2600+ is 27.4W and 68.3W respectively. The stock HSF's that comes with AMD or...
  5. I

    A few questions about the Abit NF7 from a mobo newb

    Don't worry Ken, it should work fine. Nowadays, all motherboards come with READABLE English instructions or BIOS. I own a NF7-S and have recently built 2 PC's for my friends with the NF7 (no S) board, all of them worked great right out of the box, just make sure you have the latest drivers and...
  6. I

    I'd like some more info on a case

    Either Chieftec or Chenming I'd say. Antec is definitely not the original manufacturer. Anyway, they're the best cases with very good cooling and excellent build quality (plus weight :D) , even if you don't mod them.
  7. I

    SLK-900U or SP-97?

    http://www.madshrimps.be/?action=getarticle&number=9&artpage=494&articID=119 As much as 10C difference between an Alpha PAL8045 and a Thermalright SP-97 with the same fan, are they kidding?
  8. I

    SLK-900U or SP-97?

    I'm currently overclocking a TBred 1700+ with an Alpha PAL8045 heatsink plus Thermaltake Smart Case Fan 2, with the recent price drops, I'm considering to replace my heatsink, also, I'll need a better heatsink when I upgrade to a (mobile) Barton some time later. I can get a SLK-900U for as low...
  9. I

    Upgrading from Alpha PAL8045 to Thermalright SP-97

    Tbred 2.2GHz @ 1.625V Alpha PAL8045 Thermaltake Smart Case Fan 2 Coolingflow thermal paste Epox 8RDA Chieftec DX-01WD Elanvital 44CFM case fans x 4 When running Prime95 torture test, (all readings from the Epox motherboard) Case temperature: 35C CPU Full Load: 53C Are these temperatures OK...
  10. I

    Prime95

    I'm running a newer version (v23.8.1) and there're 4 options to choose from after you click Torture Test.
  11. I

    Western Digital WD1200JB 120GB still any good?

    Sorry, maybe I haven't made myself clear enough. I was worrying that the newer WD1200JB's are not as reliable. Any idea? Other than the PB being quieter, does it run faster? If not, I'll get the JB then, I think they're very quiet-running already.
  12. I

    Western Digital WD1200JB 120GB still any good?

    I've been using a WD1200JB since last summer and I'm happy with it. I'll be building a new system within this week and is looking at the Western Digital, is WD1200JB still any good, in terms of their reliability and speed? I noticed that there're now WD1200PB, are they the same?
  13. I

    Which board to get, NF7-S or AN7?

    My current system has a 8RDA (non +), 1700+ and Samsung DDR400 512MB CL3 which does 220MHz FSB nicely (forgot about the RAM timings but it's CL3), so I would be looking somewhere in the 220MHz~230MHz area with Kingston 512MB DDR400 CL2.5 I'm going to get. By the way, is it still true that...
  14. I

    Which board to get, NF7-S or AN7?

    Is NF7 essentially the same board as the NF7-S but without firewire and S-ATA? Do they overclock the same?
  15. I

    Which board to get, NF7-S or AN7?

    Both of them are available for similar prices in here. Other than "uGuru" (which I won't be using), what special features does AN7 has over NF7-S? Are there any design changes or new overclocking features that makes AN7 overclock better? In local forums here, people are saying that NF7-S...
  16. I

    Comments on Samsung SyncMaster 959NF 19" CRT monitor?

    http://www.samsung.com/he/products/monitor/crtmonitor/959nf.asp How's this 19" flat CRT? Unfortunately, we don't have those top-rated NEC/Mitsubishi monitors here in Hong Kong, they're either sold out or are never available in Hong Kong. Does it have the Diamondtron M2 tube? How's it compared...
  17. I

    Viewsonic VG710b/s, anyone?

    How's this for FPS games, movies? Apart from that the VP171b/s has one extra VGA port (VGA + DVI for VG710b/s, 2xVGA + DVI for VP171b/s), are there other differences between the 2 in terms of image/build quality? Thanks in advance.
  18. I

    NEC LCD1760V, LCD1760NX or others?

    He's referring to local Hong Kong warranty policies I think.
  19. I

    NEC LCD1760V, LCD1760NX or others?

    Yes, Eizo monitors have very good reputation, but I think the L567 you've mentioned is a bit too expensive, near HK$5000 you see. Oh, how bad is NEC's warranty? I'm also looking at Viewsonic VG710b/s or VP171b/s, they have 3 years on-site warranty, incl. parts and labour. For Philips, which...
  20. I

    NEC LCD1760V, LCD1760NX or others?

    No, they are way too expensive!!!
  21. I

    NEC LCD1760V, LCD1760NX or others?

    I've only checked the price online and am not sure about the availability. http://www.jumbo-computer.com/lcd_e.asp http://www.videocom.com.hk/cgi-bin/price.asp?main=LCD/CRT Monitor&sub=NEC Where did you get your 1760NX from? I'm very worried about the dead pixels at the time of buying, you...
  22. I

    NEC LCD1760V, LCD1760NX or others?

    After searching through this forum, it seems that NEC LCD1760V and LCD1760NX are 2 of the most popular models, what're the differences between them, apart from that LCD1760NX has a DVI input? Is DVI worth it for the USD26 extra (local price in HK)? I don't currently own a display card with a...
  23. I

    Best 17" or 19" CRT monitor?

    Unfortunately, most of the monitors you guys have mentioned are not available in Hong Kong. For Samsung, only the 959NF is available rather than 955DF. NEC/Mitsubishi monitors are very rare in Hong Kong and they seem to have different model names than those listed in the US/European sites, I'll...
  24. I

    Best 17" or 19" CRT monitor?

    What resolution do you usually use with a 17" or a 19" CRT, I'm used to 800x600 on my 15" currently. I'm asking since I'll look for one that will do at least 85Hz at the resolution that I'm going to use, 75Hz is acceptable but I still see the flickering on my 15". Also, is it true that...
  25. I

    Best 17" or 19" CRT monitor?

    Anyone here uses an Eizo?
  26. I

    Best 17" or 19" CRT monitor?

    Thanks for the replies. So you guys prefer the NEC/Mitsubishi, what about Viewsonic or Eizo, the latter being so much expensive (locally in Hong Kong) and I wonder what's so special or unique about them. Any recommendations for the best 17" CRT? :D
  27. I

    Best 17" or 19" CRT monitor?

    I'm replacing my old 15 inch and will most probably get a 17 inch or 19 inch CRT, which currently are the best 17 inch and 19 inch CRT monitors? I'm leaning towards a 17" as a 19" seems too bulky but I do have enough space on my desk, so the other question is: 17" or 19"? This monitor is for...
  28. I

    nforce2 200 FSB???

    I have had this problem before with the 8RDA. It does 225FSB only with a 5x multiplier but it won't even do 210FSB at 2.1GHz (10*210). However, after some BIOS tweaking, it's now doing 220FSB (10*220) with a 1700+, I simply changed the "Optimal" settings in the CPU Interface (under Adanced...
  29. I

    possible prime95 fault? what's your experience?

    5 hours doesn't gurantee what I call rock solid. My 1700+ at 2.2GHz at 1.625V fails Prime95 only after 9hrs (runs fine at 1.65V for 24hrs+). I would say running 24hrs to ensure the stability.
  30. I

    Wow, just turned a XP1800+ into 3200+

    Which HSF do you have? How are the idle/full load, case temps? EDIT: OK, so I overlooked that you have a 8045, anyway, which fan do you have on it?
  31. I

    Dual channel problem with 8RDA+

    Nice overclock, is your 1800+ the latest DLT3C ones? Which cooling do you have? No, that CPU-Z program is misleading, don't trust it, it has so many problems on my 8RDA. The only way is to trust the BIOS, if it says enabled, then it's running OK. If you're getting lower benchmarks in Sandra...
  32. I

    1700+ Overclocking Success!!!

    At what Vcore is the CPU running at 2.4GHz?
  33. I

    CPU-z vers. 1.17 released

    It read the VDD as the Vcore, kind of confusing! Like now I have the Vcore at 1.65V and CPU-Z is showing 1.55V!
  34. I

    Anyone using SPI/Fortron FSP350-60BT? (Especially on AMD systems)

    dinde, Which's the original fan? Pleas give me the model name and brand of it. Thanks.
  35. I

    Anyone using SPI/Fortron FSP350-60BT? (Especially on AMD systems)

    No, don't have a voltmeter and won't do that. Apart from the out-of-range voltage readings, they are also not stable, flunctuating a lot when overclocked, which didn't happen when CPU is at default clock speed, see the screen shot below. http://athlonxp.852.net/new/MBM5.jpg
  36. I

    Anyone using SPI/Fortron FSP350-60BT? (Especially on AMD systems)

    I have an Enermax EG351P-VE (330W) with my system now, however, with the system overclocked, the voltage rails are a bit off the mark, with the +5V reading touching 4.78V (avg). I read that the CPU draws power from the +5V rail on my Epox 8RDA board so I guess it's time for a new PSU...
  37. I

    Generally, which is a better OCer, a 1700+ (Tbred-B DLT3C) or a 2400+?

    It depends on how you define "better". The "DLT3C" 1700+ is a good overclocker since it has a higher % of overclock from the original speed. 2400+ is a better overclocker if you want the highest MHz out of the 2, 2400+ usually does 2.4GHz. FYI, my DLT3C 1700+ (0308RPMW) does 2GHz with default...
  38. I

    HELP!!! Problems with PSU and Voltage

    The reading of +3.3V is actually your VDIMM, voltage of the RAM.
  39. I

    Antec True Power or Enermax

    Antec! Although I haven't own any Antec power supplies, judging from their specifications, Antec is way better than Enermax. Antec TruePower has dedicated 3.3V, 5V and 12V voltage rails while Enermax only has a very low '3.3V and 5V combined power', 185W.
  40. I

    A7N8X Deluxe Users Read !!!!

    In terms of QUALITY, I think the cheaper ones will also do, for example, the Original Samsung, or True Samsung as many of you call it (NOT the 3rd party ones). Personally, I think the Corsair XMS modules are way too expensive; yes they have very good timings but the performance yield is not that...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |