Search results

B
a power supplies suggestion question

Which one should I go for Aspire ( known as Aopen I think ) 520W trifan $99 Antec True 430 $109 Antec True 480 $133 I haven't use Aspire yet, but it is kinda cheap. Please give any ideas thanks all in canadian funds
- beviet
- Thread
- Oct 16, 2003
- Replies: 4
- Forum: Cases & Cooling
B
what is wrong guy?? not CPU or board right??

I sold a combo asus nforce2 deluxe with amd xp2400+ for someone. He come back told me that this problem is due to either motherboard or cpu. Here is the problem The board did boot up and can go to the bios. CPU detected. He install winxp, everything seem fine , the problem occurs when the drives...
- beviet
- Thread
- Jun 12, 2003
- Replies: 6
- Forum: CPUs and Overclocking
B
Abit NF-S/Epox 8RDA+/ASUS A7N8X

which is the best in term of overclocking and stability? I had used Epox and like it but the bad thing is it doesn't have soundstorm like the others??
- beviet
- Thread
- Apr 29, 2003
- Replies: 1
- Forum: Motherboards
B
Epox 8RDA or Asus A7N8X?

My asus a7n8x deluxe died on me when I just OC the FSB over the limit. I can run stable at 155FSB then change to 156. No luck, no POST, nothing, I try all the trick. Change CPU ( Duron ) and set to FSB100, then reinstall xp, clear CMOS. RMA time. I did RMA asus for a new one and if I got...
- beviet
- Post #7
- Apr 29, 2003
- Forum: Motherboards
B
which one is faster???

what would be equivalent for 2.45Ghz in term of PR??
- beviet
- Post #8
- Apr 29, 2003
- Forum: CPUs and Overclocking
B
which one is faster???

Pentium 4 2.53G overclock to 3.1Ghz Amd Athlon XP2400+ overclock to 2.45Ghz which one is faster?? since I can't translate AMD to PR for video encoding which will be faster
- beviet
- Thread
- Apr 29, 2003
- Replies: 11
- Forum: CPUs and Overclocking
B
CLEAN CPU

can anyone show me really how to install a cpu and clean it. Could I use acetone or water to clean the residue on the die? and when artic silver is already applied, does it need to clean before reapply a new one?
- beviet
- Thread
- Apr 26, 2003
- Replies: 7
- Forum: CPUs and Overclocking
B
HELP ME PLS! IS MY BOARD DEAD???

hmmmm I got to try that tonight. It weird.
- beviet
- Post #9
- Apr 25, 2003
- Forum: CPUs and Overclocking
B
HELP ME PLS! IS MY BOARD DEAD???

did that too samething. I just adjust the FSB a little go down from 157 to 154 FSB Is is CPU fried???? BIOS?? I doubt it since I didn't flash it. So .... Man, now the thing doesn't post anything don't know what to fix install Video, RAM, still no beeps nothing just a black screen on monitor
- beviet
- Post #7
- Apr 25, 2003
- Forum: CPUs and Overclocking
B
HELP ME PLS?? IS MY BIOS DEAD

Hi My comp wont POST, when I turn on, CPU spin, fan spin, hard drive LED comes up, everyitng is power up but NO POST..... Is my BIOS dead??? I am using XP2400+ Overclock to 2.34Ghz with ASUS NFORCE2 DEluxe board no beeps. I did clear the CMOS like 10 times but same problems I didn't flash my...
- beviet
- Thread
- Apr 25, 2003
- Replies: 2
- Forum: Motherboards
B
HELP ME PLS! IS MY BOARD DEAD???

no beeps. I did clear the CMOS like 10 times but same problems I didn't flash my BIOS during, I just go into the bios, configure some stuff, then I clik save and save and exit, then after this, no POST.... I was working fine before.
- beviet
- Post #4
- Apr 25, 2003
- Forum: CPUs and Overclocking
B
HELP ME PLS! IS MY BOARD DEAD???

Hi My comp wont POST, when I turn on, CPU spin, fan spin, hard drive LED comes up, everyitng is power up but NO POST..... Is my BIOS dead??? I am using XP2400+ Overclock to 2.34Ghz with ASUS NFORCE2 DEluxe board
- beviet
- Thread
- Apr 25, 2003
- Replies: 9
- Forum: CPUs and Overclocking
B
Intel P4 2.4B question for overclock

if say it can max out at 160FSB, what is it in term of MHZ?? thanks
- beviet
- Post #4
- Apr 14, 2003
- Forum: CPUs and Overclocking
B
Intel P4 2.4B question for overclock

Is this chip good??? how far can it be overclocked? thanks Intel Pentium 4 2.40B Retail Box BX80532PE2400DSL6EU MM# 848392 FPO/Batch# 3228A473 Version# A97227-001 Pack Date: 10/23/02 -System Bus 533MHz -512KB L2-Cache
- beviet
- Thread
- Apr 14, 2003
- Replies: 5
- Forum: CPUs and Overclocking
B
XP2400+ OVERCLOCK WITH ASUS NFORCE2

I got 2.33Ghz out of this by adjusting the Vcore and CPU FSB ( 156 FSB x15 multiplier ). But my RAM is Crucial PC2700 so I am not running the RAM at its max ( 166 FSB ), but just by increase the Vcore and FSB, there's no way to get pass 157FSB, my temperature never go over 45C though. My...
- beviet
- Thread
- Mar 17, 2003
- Replies: 0
- Forum: CPUs and Overclocking
B
OVERCLOCKING ADVICES PLEASE

max, so how about keep it as it right now running at 1.78V not 1.85 is it still good? or BAD
- beviet
- Post #4
- Mar 13, 2003
- Forum: CPUs and Overclocking
B
OVERCLOCKING ADVICES PLEASE

My computer specs: AMD XP2400+ Throughbed B ASUS N7S8X Deluxe Dual DDR ( 2 512MB PC2700 Crucial - 1G Total ) Thermalright SK-7 with a highspeed Sunon Fan Idle time CPU temp 37Celcius/Motherboard temp 26Celcius My set up as of now 2.30Ghz with 154FSB CPU/ RAM 1:1 ratio 1.78 Vcore Full...
- beviet
- Thread
- Mar 13, 2003
- Replies: 3
- Forum: CPUs and Overclocking
B
Overclocking need help

I don't think temperature is the issue because it stay around 38C/100F and definitely will stay well below 50C
- beviet
- Post #3
- Mar 11, 2003
- Forum: CPUs and Overclocking
B
Overclocking need help

Here are my specs AMD XP2400+ Asus N78X Deluxe Dual DDR PC2700 Crucial (1G Total ) I OC to 2.33Ghz ( maybe more ) with 1.81V ( 155 FSB ) I try with 1.76V and it only max aroung 2.3G Is it safe to leave at this level ( or OC some more without increase any voltage , so I guess would max aroung...
- beviet
- Thread
- Mar 11, 2003
- Replies: 3
- Forum: CPUs and Overclocking
B
overclocking newbie - need advices

In the bios, I set it to 1.65V ( i am set to user defined ) but when I install Asus Probe.. It tell me the voltage is 1.712?? What is the right ones?
- beviet
- Post #5
- Mar 8, 2003
- Forum: CPUs and Overclocking
B
overclocking newbie - need advices

HI I got an asus Nforce 2 board with xp2400+ I boot ok and runs ok with 1.65V vcore @2.25Ghz. It good enough for me now. I just wonder if I can stay at this speed for encoding movies 24/7 and leaves comp on for 24/7 as well. Is it OK to do that with and Overclock processor?? Is it too much...
- beviet
- Thread
- Mar 8, 2003
- Replies: 6
- Forum: CPUs and Overclocking
B
CPU+MOBO - which one is better in general

Abit IT7 Max ( not V2) + 2.53Ghz Intel or Asus Nforce2 Deluxe + AMD XP2400+ with overclocked, which one is better and without OC, which is better Intel combo is $40 less than AMD combo which one should I get? I mainly used to encoding video ( vcd, svcd, mpg2 ) so should I go for intel or...
- beviet
- Thread
- Mar 5, 2003
- Replies: 1
- Forum: CPUs and Overclocking
B
athlon 2400+ HSF Recommended please

will Thermalright SK-7 good enough to run amd xp2400+ or more. thanks
- beviet
- Thread
- Mar 3, 2003
- Replies: 5
- Forum: Cases & Cooling
B
is hard drive size effect the power supply?????

will the bigger drive and faster drive let say 120G 7200rpm will used more power than 80G drive?? or they are same?
- beviet
- Thread
- Jan 31, 2003
- Replies: 4
- Forum: Computer Building
B
can a palomino 2100+ overclock??

i am new and never do this, but there 's always the first time and this is the right time for me to try. I got a Palomino core which I know is not good for OC, I also have MSI KT400 board , how should I overclock, and I use retail HSF. What happens if let say the capability of the CPU can go...
- beviet
- Thread
- Jan 31, 2003
- Replies: 1
- Forum: CPUs and Overclocking
B
Nforce chipsets question = I need to buy one this afternoon

Is the nforce ASUS A7N8X Deluxe much differ than the non-deluxe version???? and how is the sound sounds in the deluxe?? I saw there are comparision with Audigy2?? are they that good honestly for an onbard sound??? thanks
- beviet
- Thread
- Jan 31, 2003
- Replies: 5
- Forum: Computer Building
B
which is the better HSF? I need to buy 1 tomorrow

Thermaltake volcano 9 SILENT or Vantec Aeroflow VA4-C7040 TMD Heatsink which one is more quiet and good performance wise? thanks
- beviet
- Thread
- Jan 30, 2003
- Replies: 6
- Forum: Cases & Cooling
B
Sony or Canon for Digital Camera??? Which one would you choose??

I had a sony camera and it works great. As for style, I go with sony but agreed that canon was in the camera business long before sony comes. any of them is good. And btw, the biggest thing for a sony is they cost too much Just compare sony f707 and canon G3, sony cost at least $200 more given...
- beviet
- Post #99
- Jan 30, 2003
- Forum: Computer Building
B
HELP - MY COMP ACTING WEIRD - SHUT OFF BY ITSELF OFTENLY

I used the AMD Retail HSF because I bought a Retail CPU
- beviet
- Post #4
- Jan 26, 2003
- Forum: Computer Building
B
HELP - MY COMP ACTING WEIRD - SHUT OFF BY ITSELF OFTENLY

My comp acting weird Sometimes it is on for 3 days without any problems. Sometimes it is on for 5 min and then shut off by itself and the alarm went off. Even boot in bios only it still shut off by itself. The temperature when boot in bios and leave them for 30 min is 53 celcius. I am using...
- beviet
- Thread
- Jan 26, 2003
- Replies: 4
- Forum: Computer Building
B
UPGRADE IDEAS PLEASE

I currently using AMD XP 2100+ My next upgrade thought is AMD XP2400+ FSB333 or Intel P4 2.53G with Intel D845PEBT2 board. Which is better in general ? thanks
- beviet
- Thread
- Jan 24, 2003
- Replies: 5
- Forum: Computer Building
B
DVD Burner connection help

Is it good idea to connect a Pioneer AO5 DVD Burner to PCI IDE Controller rather than IDE on board. Ideas please thanks
- beviet
- Thread
- Jan 24, 2003
- Replies: 1
- Forum: Computer Building
B
HELP- VIDEO CAPTURE HARD DRIVE CONNECTION

so no partition in either drive right?? thanks guy here is the right step if not correct me IDE 1 - Maxtor 120G 2mb cache - no partion ... OS and stuff IDE 2 - WD 180G 8mb cache - no partition also ... and by the way the last question is it matter if the 180G drive connect to a PCI IDE...
- beviet
- Post #10
- Jan 23, 2003
- Forum: Computer Building
B
HELP- VIDEO CAPTURE HARD DRIVE CONNECTION

thanks but I am not a computer people and I want as simple as possible. I will capture in DV and AVI mainly not uncompressed though. Please giv eme inputs on how should I set it for the best here is the other spec ATI AIW 8500 DV 512MB DDR333 Ram DVD burner AMD XP2100+ MSI Kt400 board. hope...
- beviet
- Post #6
- Jan 23, 2003
- Forum: Computer Building
B
HELP- VIDEO CAPTURE HARD DRIVE CONNECTION

what is that mean?? if it were you, how do you set it up I need your input thanks
- beviet
- Post #3
- Jan 23, 2003
- Forum: Computer Building
B
HELP- VIDEO CAPTURE HARD DRIVE CONNECTION

I had 2 drive WD 180G 8MB cache and 1 120G Maxtor ATA133 2MB cache. I use this for video capturing and editing only. How should I divide it up?? What should be OS drive and so on.... Any advices are all good. thanks in advance. Note - I heard for capturing parition the drive is not good?? Is it...
- beviet
- Thread
- Jan 23, 2003
- Replies: 12
- Forum: Computer Building
B
HELP ME PLEASE

I got 2 drives WD 180G 8MB and Maxtor ATA 133 120G 2MB. I only do video capturing and editing... so I want the fastest drive as boot drive... I heard that espcecially for video, never partition the drive is it true?? Will it decrease the performance if I do so?? Here is my plan if partition is...
- beviet
- Thread
- Jan 23, 2003
- Replies: 1
- Forum: Computer Building
B
NEED ADVICE FOR LCD - I BUY IT TOMMORROW - WHICH ONE DO YOU CHOOSE

great for the advice If you were ask to pick one of those ? what would you choose?? given that all of them has 3 year warranty on it.
- beviet
- Post #3
- Jan 15, 2003
- Forum: Computer Building
B
NEED ADVICE FOR LCD - I BUY IT TOMMORROW - WHICH ONE DO YOU CHOOSE

I came down to 3 choice together. I live in canada so I don't have much to choose like you guys in US 1. HP F70 Refurbish ( this has DVI Connection ) $ 799 canadian 2. Samsung 760V - analog Connection $ 799 Canadian 3. NEC 1700V - analog connection $824 canadian - $75 rebate I have radeon...
- beviet
- Thread
- Jan 15, 2003
- Replies: 3
- Forum: Computer Building
B
HARD DRIVE SET UP HELP

I had 2 120G drive Mator ATA133 and WD ATA100 should they connect in seperately IDE channel since ATA is different or it doesn't matter should I connect llike this On IDE1, primary master Maxtor ATA133, secondary master WD ATA100 or IDE1, master maxtor IDE2, master Western thanks for all the advice
- beviet
- Thread
- Jan 15, 2003
- Replies: 1
- Forum: Computer Building

RESOURCES

Top Bottom