Search results

  1. R

    P4 1.6a overclocking

    I dunno about the 1.6a's although I've heard a lot of ppl that have been able to get them up to 2.2+. My experience is limited to the 400mhz fsb 1.5ghz Williamette core that I was using temporarily in my mobo till i got a new processor. With NO difficulty, I set the fsb to 133 and it booted...
  2. R

    Help - device failue error message - OC?

    try 34/68 pci/agp seems to resolve many issues with radeons... also try to disable fastwrites
  3. R

    Nice P4 HSF shootout

    Seriously, the Alpha PAL8942 is hands down the best air cooling heatsink i've ever used. In combination with AS3 and a YS tech 80mm variable, i've been able to drop cpu temps from (idle/load) 42C/59C to an incredible 32C/45C overclocked to 2.88ghz! It's a bit on the pricey side, but i don't...
  4. R

    GA-8INXP 2.4B@163FSB (stuck, help!)

    yeah it's at 34/68
  5. R

    GA-8INXP 2.4B@163FSB (stuck, help!)

    looks like we're running a similar situation, cept the mobo.. I don't think more voltage is going to help. I already juiced it up to 1.70 (actual, gigabyte overvolts by .05) and I gained the ability to boot into windows and screw around, but sooner or later it locks up. And i gained NO...
  6. R

    GA-8INXP 2.4B@163FSB (stuck, help!)

    I seem to have hit a wall here =(.. Anyone have any tips? I know it's not my ram because it's not even running at it's rated speed of ddr 333 yet. I have cpu vcore at 1.55(1.60 actual) agp vcore at +.1. it just WON't be stable. I'm beginning to think i've topped out this 2.4B as I hear other...
  7. R

    Granite bay is too expensive !!!

    high demand, low supply =(
  8. R

    Now I've seen everything - a logcabin computer case.

    That's nothing. My boss complained about me having a second computer at work and told me I had to give it away. (I work in IT) So, I disassembled it. Sawed out some packing foam, and proceeded to rebuild the computer in my drawer, disk drives and all. The cables ran out the back of the drawer...
  9. R

    Chieftec Cases: where'd you get it??

    here Hmm, I think the cheaper ones u guys are talking about are steel right? The case I got was aluminum and came with 4 clear fans and a 420w power supply. Either way I paid a lot more than $35!
  10. R

    Hyper-Threading Technology

    not really better. but if you say, run icq, aim, winamp, and quake III at the same time your system will be able to handle it better without having a seizure
  11. R

    Last request for opinions on Corsair 3200 ram (which one)

    dude, if you're aching for 2x512 just get samsung pc2700 for that price read this review trust me, unless you're planning on going over 191 fsb you're not going to be missing that overpriced stuff. If you're doing video editing, more ram will equal more speed than faster ram. 1 stick of 512mb...
  12. R

    Looking for a specific case

    I just went to my supplier today and he showed me an aluminum case with a drive door that is hydraulically actuated! You hit a button on the top of the case and the door slowly slides down and exposes the drives. Might be just what you need.
  13. R

    Looking for glowing air flow testing item

    *shrug* I'd like to know too, but for the most part, cigarette smoke does me just fine :D It gets spit back out the back of my case so quickly I highly doubt it even makes a difference.
  14. R

    Cooling for a 3.06 Ghz processor

    hmmm... care to sell your old CPU? :D
  15. R

    How much weight can you put on a case??

    This is what I'm using on my old rig. I swear it is the sturdiest case known to man. I have been using it as a foot rest, lamp stand... currently my shuttle is residing on top of it. I have stood on it to reach things on a shelf. Of course it weighs a friggin ton. But you just can't beat that...
  16. R

    what tool to use to cut fine pictures in case side

    the dremel does all
  17. R

    RADOEN 9700 AND SHUTTLE NF2 FLEX ATX CASE..WILL IT FIT???? any reviews of nf2 flex atx sytem

    yes it will fit I have a shuttle sk41-g (same form factor) and threw a ti4600 in it which is bigger than the radeon 9700 pro.
  18. R

    ECS K7S5A vs. Shuttle SN41G2 (nforce 2)

    But...it's....so....CUTE! :)
  19. R

    Another C1 2.4B @... EDIT: @3536 now~ My Ram holding me back!!

    . .. ... . . .wow. . . ... .. . where did you get this chip again? :Q
  20. R

    can a single cpu do multitasking?

    Look into a P4 3.06 ghz with hyperthreading :)
  21. R

    Help a noob choose a HSF! Earn karma points!

    sweet, I just ordered the alpha, the YS variable speed 80mm, and some AS3 from SVC.com! They seem to be a really good site, they're the only ones with free shipping on the 3 oz artic silver! :D Thanks for all the help guys, I can't wait till the goodies get here hehe. mad karma for all ;)
  22. R

    New rig alert: 2.4B@3492 + P4G8X

    grrr :disgust: maybe, my brother will wake up tomorrow morning with no cpu in his sony vaio.... :D
  23. R

    Help a noob choose a HSF! Earn karma points!

    alpha is $$$!! :Q hehe just the same I might shell out. I assume the alpha is designed for low CFM use? What's the minimum I can get away with and still get better than stock performance? What do you guys think of Enermax's 80mm fans? Where is a good/cheap place to purchase all this stuff...
  24. R

    New rig alert: 2.4B@3492 + P4G8X

    great work! damn you and your c1 ! I just got my B0 today and for the life of me can't get it to 166 fsb on a 8INXP.. very bummed :( Any idea on how i could get a C1 for sure? (hmmm, intel retail warranty?)
  25. R

    Help a noob choose a HSF! Earn karma points!

    Spark 7 I thought that volcanos were AMD? gonna look into the alpha, seems like it comes highly recommended. What fan would you recommend? as for the retail HSF, yeah I was lazy and just left the pad on.. come to think of it, that's going to be a b!#(h to get off =P I'll be sure to order...
  26. R

    Help a noob choose a HSF! Earn karma points!

    New rig :D Antec knock off case with 4 case fans (loud) GA-8INXP p4 2.4ghz (b0 stepping :( ) 2x 256 PC2700 samsung ti 4600 Enermax 430w PSU CPU Idle temp 35 C CPU Max Load 57-60C :Q Case temps 25 C (never budges, ever.) Obviously these temperatures are well within spec, however, I want feel...
  27. R

    Antec/"Alienware" style case?

    This is where I got mine
  28. R

    Granite Bay vs Rambus Benchmarks

    Woo what a great idea :) sigh, too bad u don't run linux. I'd like to see a kernel compile comparison.. on the off chance that you do some programming maybe you could do some compilation benchmarks? BTW you're lucky to have two really great rigs!
  29. R

    ***Official***BARTON watch thread - Official Launch AND REVIEWS

    I bet your right, but various sources across the states have also gotten their hands on a few bartons and the evidence has so far been corroborated. The extra cache just didn't make all that much of a difference between the barton and the thoroughbred at similar clockspeeds, and I'd be surprised...
  30. R

    ***Official***BARTON watch thread - Official Launch AND REVIEWS

    Wow that's pretty damned ignorant. Has it occured to you that "foreign" sites get their information first because they might not be subject to the same NDA agreements as domestic sites? Has it occured to you that these "foreign" sites may not be so foreign to a good percentage of Anandtech...
  31. R

    What do you think is holding back my OC?

    I'd have to say it's your power supply, barring an unlucky selection of cpu. You've got 5 drives in there 2 cd roms and 3 hard drives, 2 pci devices one of them being a rather large sound card, and a huge assortment of case fans. That poor 350w enermax is probably hating life right now. With...
  32. R

    DDR Ram Help!

    With samsung pc2700 hovering around 45-50 dollars per 256 mb stick, I wouldn't bother with the expensive name brands. It's been proven on various sites that heatspreaders sometimes do more harm than good, and mostly just look pretty. At any rate, most of the name brands like Corsair and OCZ...
  33. R

    My system thinks it has 2 processors!?

    I already have WCPUID, everything looks peachy. The darndest thing is when I log on as another user, it goes back to thinking that I have 1 processor. Wierd. I'm thinking that the hyperthreading implementation in this board is acting funny... Maybe this is one of the '6 Dual Miracles" :D
  34. R

    My system thinks it has 2 processors!?

    Wierd, I run 3dmark 2001 and under system information it gives me: Processors: 2 x Intel Pentium® 4 @ 1.99 GHz Then I run SiSoft Sandra and it tells me my motherboard supports 2 cpu's and all the reference benchmarks that pop up are for multi-processor systems. Yet it says that hyperthreading...
  35. R

    GA-8INXP FINALLY came! Now need everything else..

    I'm not out to make extra money on anyone, I was in the same situation as you. Unfortunately all the pieces we got were already earmarked for ppl very early on. If you want, search pricewatch for amastore.com and place a pre-order with us, mention that you're from anandtech, and I'll personally...
  36. R

    GA-8INXP FINALLY came! Now need everything else..

    How ironic, as I was typing out the header to that message, the ti4200 8x I have in it locked up according to winxp. Looks like there may be AGP 8x issues or something. I disabled EZtune because I plain don't trust it. When I opened it up it wanted to run my agp/pci at 88/44!!! eek. Rebooted...
  37. R

    GA-8INXP FINALLY came! Now need everything else..

    Well it finally got here, since I work for a distributor, I managed to get 2 pieces from gigabyte at cost. It's rediculous what some people are charging for this board, knowing what I paid for it. Either way, supply and demand, you know. Even so, I never felt like I got more for my money. This...
  38. R

    200GB 7200rpm 8Mb cache ide HD $200 after 65$ rebate, MicroCenter

    I tried the PNY DDR deal at that BB store the manager told me the exact same thing. The way I see it, cost isn't even a local store manager's concern. What really pisses me off is that they seem to change the store policy to fit their needs when it's convenient. He was so snide about it too, he...
  39. R

    200GB 7200rpm 8Mb cache ide HD $200 after 65$ rebate, MicroCenter

    Man, which BB did you go to? i've had no luck PM'ing at any around here. I live in the same area, all the managers are !#*(% Does circuit city have the drive? they're very no hassle about price matching. The one in tustin is especially cool.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |