I just did a reformat and clean install of WinXP Home. I'm using all of the same hardware with the exception of a NEW harddrive. After installing XP I ran some programs, benchmarks, surfed the web, etc.. and everything ran smooth.
However, after going to "Windows Update" and installing all of...
I just did a reformat and clean install of WinXP Home. I'm using all of the same hardware with the exception of a NEW harddrive. After installing XP I ran some programs, benchmarks, surfed the web, etc.. and everything ran smooth.
However, after going to "Windows Update" and installing all of...
I just did a reformat and clean install of WinXP Home. I'm using all of the same hardware with the exception of a NEW harddrive. After installing XP I ran some programs, benchmarks, surfed the web, etc.. and everything ran smooth.
However, after going to "Windows Update" and installing all of...
I have noticed that my Harddrive LED is constantly blinking. I have reformatted, installed WinXP and even with NOTHING open, the LED still flashes on and off every 2 seconds or so. I have tried unplugging all USB and Network devices and it didn't stop. I have no Virus software installed either...
If i am going to use my SB Audigy instead of onboard sound, is there any way to install my nforce drivers from the disk or the 116s from the Asus site WITHOUT installing the sound drivers?
I noticed that even when I disable the onboard sound in the bios it still installs the sound drivers...
My A7N8X came with the 1001g BIOS so I took advice from this forum and flashed to 1001c and it DID give me a huge performnce boost. I then flashed to the 1002 beta bios and performance actually fell a tad but all worked fine. I then tried bumping my FSB and it wouldn't let me so I took advice...
I am having the same problem. I DO have the ability to change my multiplier and FSB in BIOS, however, if I change my FSB even 1 MHz from 133 to 134 and lower the multiplier it WIL NOT post. If I change ONLY the multiplier it will even go from a 2400xp to a 2800xp but it will not let me change...
OK, then if I can, then WHY won't my computer post when I move my FSB even 1 MHz from 133 to 134? It post fine when changing the multiplier to OC it but if I change the FSB even 1Mhz and even lower the multiplier it won't post.
I just flashed my BIOS witht he new beta 1002 BIOS and noticed that it let me change my multiplier to 8x/16x and even 9x/18x where with the 1001c all I had was 13x or 15x in auto mode. Witht he new BIOS when I changed my multiplier to 16x and 17x it let me do it, booted fine and even ran...
I have been reading this forum for hours and see people saying that they got 150, 160,175, etc.. FSB. They talk about multipliers and unlocking the CPU. I have read many overclocking guides but I am still confused because many of the guides refer to terms that are totally differnt than the terms...
I ma using the 2.00 drivers from the nvidia site and no I don't have an advanced tab. I also noticed that there is no primary and secondary controller. Just an NVIDIA nforce IDE controller.
When I used VIA boards I could go into device manager then click on IDE controllers/properties and set my DMA preferences. However, on this board, when I click on the IDE controller in device manager and then on nforce IDE controllers/properties, it doesn't give me a tab for doing that. the only...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.