I don't know how 2x1024 runs but I have the 2x512 patriot 2-3-2-5 and I was able to overclock it to 210 at the same timings and at stock voltage of 2.6.
I connected the front panel audio ports the the front panel audio connector on my mother board. However, upon doing so my rear ports stopped working. Is this common when you connect front audio ports?
Its for a Shuttle AB60R intel motherboard btw.
OT: To the people who bought this card and flashed it to a 9800XT, what was the chip type? R350 or R360? ATItool shows R350 for my card which means it isn't flashable to 9800XT since it uses a R360 correct?
To people who bought the card, what core and mem speed is the card supposed to be?
I thought it was supposed to be 380 core and 350 mem. I'm about 10 off on mem
378 core and 337 mem
Is there such a program? I found a program that compares OC'ed AMD processor speeds between each other. Wondering if there is the same for AMD compared to Pentium.
Has anyone replaced the antenna, particularly on a leadtek tv2000 expert. The antenna that came with the card is long and radio reception isnt great. What could it be replaced with?
I've been using it over a week for directtv and the radio. i have a leadtek expert btw. I havent tried any captures with the card so far. I have directtv connected with an s-video cable that came with my radeon. Picture quality is better than I expected. I haven't found a use for the remote...
That's what I use to remove the molex pins. Directron sells them for 9.99 as well. I think $5 ship and they do ship extremely SLOW.
Vantec Cable Sleeving
I unhid the partition as you mentioned and it worked. I'm going to use the drive for backups and media. What should the cluster size be? Should I leave it to 4k or change it to 16k
http://images5.fotki.com/v58/photos/2/22469/45074/snag-vi.jpg
http://images5.fotki.com/v57/photos/2/22469/45074/snag2-vi.jpg
I'm not sure what the beginning part of the drive contains - but I can't seem to merge my D: with it. I didn't have the problem before. When I did try to merge it - I...
I have 2 Western digital HD and I'm going to run SATA RAID 0. How are the dip switches supposed to be set? Should I just leave it on cable select or should I change it to single drive for this setup?
You could always go through the manufacturer since they do offer a warrenty on items you buy. I've bought open box items on clearance at staples where I know the item doesn't work. You can't beat a $250 3 in 1 printer for $40=D
B-Quiet Brown Bread is cheaper than dynamat and offers the same sound deadening. I have this in my car and the stuff really works when it comes to sound deadening. I ordered a 35 sq ft roll and it wieghed about 10lbs. I don't think your case would be that muchheavier if you do decide to use it.
http://gathering.tweakers.net/forum/view_message/19202179
I'm looking a few websites like http://www.ocforums.com/vb/vb/showthread.php?s=&threadid=244237 and under the model number on the chip shows a code starting with AQX, AQY,and AQZ.
My chip has a code of PQZFA 0347MPMW
Whats the difference?
I decided on on a SLK900A and a 92mm Panaflo L1A for processor cooling. I already bought the clip on heatsink and I'm concerned that the combination of the heatsink and the fan may be too heavy for the Abit mobo. Do you think it will hold. The heatsink alone is ~ 500g. Maybe I should have gotten...
Maxtor 40gig 2mb, 7200rpm
or
Western Digital 80gig 8mb, 7200rpm
I was considering partitioning either one of the drives for windows and program files? Is that a good idea?
This is the first rig I'm going to build.
I already have these parts:
AMD 2500+ Barton
Abit NF7-S ver 2.0
Radeon 9500 softmodable to 9700
WD SE 80GIG 7200RPM, 8mb
I'm looking to overclock:
1. AMD 2500 to a 3200
2. ATI 9500 to 9700 Pro speeds or more
3. Has to be quiet, does not need to be...
I've tried Omega drivers, wizzard drivers and havent been able to get the rivatuner proggie to work.
What happens is that when I boot up with Omega or wizzard drivers , my monitor is not getting a signal from the vid card. So there is a blank screen.
I was able to get the omega driver to work...
Live thread live
Just ordered one (10/13) from connect3d for 158 shipped via UPS ground.
http://www.connect3d-us.com/store/c3d_catalog.aspx
Hopefully they still have in in stock with the L shaped memory.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.