Search results

B
Poll: Do you like a fan on the top of your case?

I've got a system in a Lian-Li PC-65b, which comes with a blowhole fan. (All fans in this case were replaced with Panaflo H1A's controlled by a Sunbeam rheostat.) 95% of the time the blowhole fan only runs at 7V to cut down on noise. I do find it handy during the summer to cool the system down...
- Blooz1
- Post #5
- Jan 28, 2004
- Forum: Cases & Cooling
B
Can anyone find a better case/power supply than what I've found for $66?

I'd say the Compucase/Fortron combo is a winner, even if cheaper stuff is found! I have that case, and it's sturdy, roomy, well-built, and with some simple mods is very quiet. I've got a 350W Fortron in another system which is virtually inaudible 99% of the time, with rock-steady voltages at...
- Blooz1
- Post #9
- Jan 27, 2004
- Forum: Cases & Cooling
B
I am tired of cheap, crappy cases.

Doh! I forgot to link to the Compucase! I also have one of the black ones, and it's a great case. I got mine for $39 from Directron w/o PSU. I notice they now charge +$5 for no PSU! The only thing wrong with mine was that silver paint on the front bezel. It's a cheap paint job, so I...
- Blooz1
- Post #12
- Jan 16, 2004
- Forum: Cases & Cooling
B
I am tired of cheap, crappy cases.

The Compucase LX-6A19 has the same chassis as the Antec SLK-3700 without a front door. It's available without a PSU for under $50 from Directron. The case is quality built, is set up for 2-120MM fans, has a ton of room for anything you want to throw in it, is easy to work in, and runs very cool...
- Blooz1
- Post #4
- Jan 16, 2004
- Forum: Cases & Cooling
B
Fans connected to mobo

You should be ok with the fans you have posted. BTW, I'm building an HTPC with the same MB! Nice lil' board, but the worst "manual" I've ever seen!
- Blooz1
- Post #5
- Jan 14, 2004
- Forum: Cases & Cooling
B
Fans connected to mobo

I agree that you should be fine with those low-draw Panaflos. The main advantage of using the MB headers is that they usually support fan RPM monitoring, if you are using a 3-wire fan that is set up for this feature. They also, obviously, don't waste a Molex connector off the PSU. The...
- Blooz1
- Post #3
- Jan 14, 2004
- Forum: Cases & Cooling
B
Best board for Twinmos 3200 w/BH-5 chips??

Winbond BH-5 goes together with Epox 8RDA+ boards like "meat and potatoes"! I've got one running with 512Mb of Twinmos/Winbond at 215FSB for everyday use (11-2-2-2). I know many have gotten theirs to run much higher, but this is where my rig "feels" comfortable for 24/7 usage.
- Blooz1
- Post #3
- Jan 14, 2004
- Forum: CPUs and Overclocking
B
is there a GPU temp. sensor on a Radeon Pro 9800?

The Tyan 9800 is the only one that I know of with a temp sensor onboard.
- Blooz1
- Post #3
- Jan 13, 2004
- Forum: Cases & Cooling
B
GMCORPORATION X-21 TRINITY!!!!!

If this isn't the same case you're talking about, it's pretty close! Here's a thread at SilentPCReview Forum on the case and where it can be found:LINK
- Blooz1
- Post #2
- Jan 13, 2004
- Forum: Cases & Cooling
B
Can you use both your case's front audio ports as well as the rear motherboard ones?

I don't know about your board, but on my Epox 8RDA+ boards, it's an "either or" situation. If you have the front audio jacks enabled, you lose the rear jacks. They won't all work at the same time.
- Blooz1
- Post #6
- Jan 10, 2004
- Forum: Computer Building
B
I'm trying to find a good location to place my intake fan in the front of my case-Please help!

I agree that without better pics of the interior of this case, it's hard to say what would work the best for you. Many times, the actual chassis may be set up entirely different than the front bezel. Some manufacturers use many different front bezels on the same chassis to create models with...
- Blooz1
- Post #4
- Jan 10, 2004
- Forum: Cases & Cooling
B
What's the word on Thermalright's new ALX-800?

Well, assuming that it does work as well as an SLK-800a, I had good results at a mild OC with my SLK-800a and a Vantec Stealth (roughly comparable to the L1A). It was extremely quiet. Once I upped the OC, I replaced the Stealth with a Panaflo H1A, which has worked great ever since. The...
- Blooz1
- Post #11
- Jan 9, 2004
- Forum: Cases & Cooling
B
Buffalo Tech PC3200 w/Winbond CH-5

I recently bought a 512Mb stick of this memory from NewEgg for $76. I've got Twinmos/Winbond BH-5 running in one of my other systems at 11-2-2-2 (210FSB) without a hitch. I'm planning to use the Buffalo in an HTPC I'm building which will be using a Biostar M7NCG-400 matx MB. This is an nForce...
- Blooz1
- Post #22
- Jan 9, 2004
- Forum: Hot Deals and Giveaways
B
Does any case out there have dual 120MM fans and a normal HD cage?

The Compucase LX-6A19 has what you're looking for. This case is sold by Coolcases.com as the D8000, but I got mine from Directron for about $40. This is the same chassis as the Antec SLK-3700 without a door on the front bezel. It's heavy steel, and has a ton of room inside. The removable HD...
- Blooz1
- Post #5
- Jan 9, 2004
- Forum: Cases & Cooling
B
Almost Famous 2-Disc Bootleg Edition DVD For $10 Shipped

This version also comes with an audio CD with songs from the film.
- Blooz1
- Post #7
- Jan 8, 2004
- Forum: Hot Deals and Giveaways
B
how does Panaflo FBA08A12H1BX handle 7volts-12volt range

I would have to say "no". I've got an L1A on the side panel of my 2nd rig cooling my 9800NP, and that's virtually inaudible. The H1A, even at it's lowest setting, has a bit of mechanical noise, kind of a 'growl", but it's not objectionable to me.
- Blooz1
- Post #6
- Jan 8, 2004
- Forum: Cases & Cooling
B
how does Panaflo FBA08A12H1BX handle 7volts-12volt range

I use the 80MM H1A fans as a replacement for the Adda's in my Lian-Li PC-65b case, controlled by a Sunbeam rheobus. The fans move a lot of air on the full setting, but are a bit noisy. At the "half" setting, they are significantly quieter, yet keep my system at idle at 36C (CPU) and...
- Blooz1
- Post #4
- Jan 8, 2004
- Forum: Cases & Cooling
B
$5 Radeon 9700 passive cooling project... *More PICS added* *Update..OC Results**

Look again. That Alpha cooler is aluminum with a copper heatspreader on the bottom.
- Blooz1
- Post #35
- Jan 7, 2004
- Forum: Computer Building
B
What's the word on Thermalright's new ALX-800?

Differences of 1 degree. And why bother? Price and less weight.
- Blooz1
- Post #4
- Jan 6, 2004
- Forum: Cases & Cooling
B
CATALYST Uninstaller

I've used it, but in conjunction with Driver Cleaner. It worked, but since I used both programs, it's hard to tell how well!
- Blooz1
- Post #4
- Jan 6, 2004
- Forum: Graphics Cards
B
What's the word on Thermalright's new ALX-800?

That's exactly what it is! Reviews I've seen say it performs almost as well, too.
- Blooz1
- Post #2
- Jan 6, 2004
- Forum: Cases & Cooling
B
Lian Li Cases

The going price I've seen at most places is the $160-165 range.
- Blooz1
- Post #3
- Jan 6, 2004
- Forum: Cases & Cooling
B
Quietest power supply?

I'm using a Fortron FSP350-60 in one of my systems (120MM model), and 95% of the time it's virtually silent. On the rare occasion that there's enough heat in the case, the fan cranks up and it's noticable. I believe NewEgg is selling these for about $40 w/o shipping. The PSU is extremely...
- Blooz1
- Post #6
- Jan 5, 2004
- Forum: Cases & Cooling
B
what video card is in your MAIN rig. POLL!!!!

Sapphire 9800np OC'd to 380/340
- Blooz1
- Post #56
- Jan 5, 2004
- Forum: Graphics Cards
B
OC'd 2500 Barton,whats your lowest temp?

Barton 2500 at 2310 (1.72V), SLK800a/Panaflo 80MM H1A usually sits at 38C idle.
- Blooz1
- Post #8
- Jan 4, 2004
- Forum: Cases & Cooling
B
POLL: how many fans do you have inside your case?

Intakes - 2 (Panaflo 80MM H1A) Exhaust Blowhole - 1 (Panaflo 80MM H1A) Vid Card - 1 (Stock Sapphire) HSF - 1 (SLK800a/Panaflo 80MM H1A) Rear Exhaust - 1 (Panaflo 80MM H1A) (Case is a Lian-Li PC-65b) Total = 6
- Blooz1
- Post #13
- Jan 3, 2004
- Forum: Computer Building
B
Are there ANY m-ATX mobos with native FSB400?

How do y'all think that Bioostar board would do for a mild OC? I'm looking for an nForce MATX board for an HTPC so I can take advantage of the Soundstorm, as this machine will see extensive use with audio files. I just want to be able to run a 1700A in the 1.7-1.8GHz range, nothing...
- Blooz1
- Post #4
- Jan 3, 2004
- Forum: Motherboards
B
Biostar M7NCG400 - Good for HTPC?

I've been in the market for a nForce MATX MB for an HTPC I'd like to build, and saw this board for $65 at NewEgg. For some reason, I can't seem to find many reviews! The system I'm planning will be mostly for DVD playback/MP3 use. Is the sound on this board as good as a comparable ATX board...
- Blooz1
- Thread
- Jan 2, 2004
- Replies: 0
- Forum: Computer Building
B
2500+ Barton won't hit 200fsb. Help? Settings?

Chocoruacal's right on this one! People here generally do lots of testing while OCing, but there are lots of other people who don't bother, but then turn around and brag all over the Web! I've got a 2500 that runs at 2310 at 1.72V, but it won't BEGIN to pass Prime at that speed and voltage...
- Blooz1
- Post #38
- Jan 2, 2004
- Forum: CPUs and Overclocking
B
My unlucky 2500+ experience and some questions

Well, the PSU you described certainly isn't helping things any, Blue Weasel. The older 8RDA+'s with the A2 NB are really "hit or miss" as far as results, also. I've got an A2 that I got as a refurb from NewEgg, and it doesn't like anything over 180FSB either. It's set up with a Fortron...
- Blooz1
- Post #10
- Jan 2, 2004
- Forum: CPUs and Overclocking
B
Poll: Do you Overclock your home PC?

Hey, at my last job I worked for 4 years on a P133, and it was fine for almost everything! I finally got upgraded to a 1.1G Celaron! You have to remember, the office aps used most don't take anywhere near the "horsepower" that even average games do...
- Blooz1
- Post #17
- Jan 2, 2004
- Forum: CPUs and Overclocking
B
Antec SLK-3700 BQE Case

A Panaflo 120MM will not fit in the front of the BQE, AFAIK. They are all 38MM thick, while the space between the drive cage and the front of the chassis will only take a 25MM thick fan, from what I've read. It is a great case, though. You'll love the quiet cooling of 2-120's vs. multiple 80MM...
- Blooz1
- Post #2
- Jan 2, 2004
- Forum: Cases & Cooling
B
Free Guinness Bar Towel (it's back)

Not valid in Ct - crap! The frisbee was actually an intelligence test - were you smart enough to be able to put it BACK in the bag? I've had lots of fun with people and that thing!
- Blooz1
- Post #89
- Jan 2, 2004
- Forum: Hot Deals and Giveaways
B
questions about S/PDIF

Yep! Get yourself a coaxial cable and should just plug right into one of the inputs on a receiver.
- Blooz1
- Post #4
- Dec 31, 2003
- Forum: Computer Building
B
Lian Li 6070 + Athlon 2700+ cooling

Ahhh, you had to go and do that, Mech! Now I'm definitely going to mod my holder! I was going to ask about your abling to the front switches after looking closely at the pic you posted. That must have been quite a job to do! Does it make connecting things more difficult to hook up with...
- Blooz1
- Post #12
- Dec 31, 2003
- Forum: Cases & Cooling
B
Lian Li 6070 + Athlon 2700+ cooling

I'll second the results that can be obtained by taking the filter holder off and doing the fan grill mods. It's made a great deal of difference on my PC-65b. I replaced the stock fans with Panaflo 80MM H1A's, which are controlled by a Sunbeam rheostat. At full bore, it's louder than stock, but...
- Blooz1
- Post #10
- Dec 30, 2003
- Forum: Cases & Cooling
B
Fanless Power Supply?

The Fortron is kinda loud at full bore, but mine has kicked the fan up exactly twice in two months of operation! The first time it happened, I had to crawl under my desk and check it out, as I had no clue where the noise was coming from! This PS is amazingly quiet 95% of the time, and I...
- Blooz1
- Post #7
- Dec 30, 2003
- Forum: Cases & Cooling
B
The Case that shall not be named...

Amazingly creative! But - could you live with it lurking near your desk?
- Blooz1
- Post #7
- Dec 30, 2003
- Forum: Cases & Cooling
B
Help:Sunbeam Rheobus Fan Speed Controller- What do you think of it?

I have two systems, and both have the older versions (single-color LED's, don't turn fans completely off) installed. Both units have worked extremely well since day one without any issues. The LED's are bright, though! If you don't like this look, it's a snap the change out the LED's for less...
- Blooz1
- Post #6
- Dec 26, 2003
- Forum: Cases & Cooling
B
Hotness: IRIVER SlimX 550 $150.84 shipped from Dell

I've got the previous model to this one, and it's great! Having the controls on the remote is great for use while driving. (To answer the connection question, I use a cassette adapter - works very well!)
- Blooz1
- Post #8
- Dec 18, 2003
- Forum: Hot Deals and Giveaways

RESOURCES

Top Bottom