Search results

  1. T

    Speedstep not working after sp2?

    Hey fbrdphreak.. thanks for the link on SpeedSwitchXP. I tried that 'cause I was still having problems and this solved the problem beautifully. It seems that even tho I had set the BIOS to dynamic speed on battery power, it was somehow reading max performance (a bios bug I guess?). This software...
  2. T

    Speedstep not working after sp2?

    Anybody figure out a fix for this? I just installed SP2 and I seem to be suffering from the same problem.
  3. T

    dlink di-514 multiple vpn wireless connections

    I'm not sure about this particular router, but most routers don't allow multiple vpn's. If they do, they'll specifically say so because it'd be a big selling feature. Like the top of the line netgear, for example. I thnk that this particular router doesn't.
  4. T

    Cheap antenna / increase signal strength.

    Sorry, I didn't mean the client card doesn't have an antenna - it has a connector for one but there isn't one in my notebook. So I added a tiny little loop type, but there is virtually no gain as far as I can tell on it. I have a new antenna on the way, supposedly about 4dbi gain on that one -...
  5. T

    Cheap antenna / increase signal strength.

    BTW - regarding the aluminum foil - does it have to be an exact parabola? or just a curve? My AP is also on an outside wall.
  6. T

    Cheap antenna / increase signal strength.

    Hi all. First off, thanks for all the replies. Scott: Unfortunately, moving the router would be quite tricky for me at this point. I did do a temp, pretty messy move about 3 feet out (towards the room I want the signal) but I didn't notice any difference. Also don't have any other 2.4g devices...
  7. T

    Cheap antenna / increase signal strength.

    Well, in the next room I get about 70%, where it doesn't seem to drop connection. So I'd only be looking for a 10% gain in signal strength or so. I know the db gain is exponential so I'm thinking that 5.5 or 7dbi would do the trick. Maybe I'll just give it a try and see how it goes. Thanks for...
  8. T

    Cheap antenna / increase signal strength.

    You guys seem pretty knowledgeable so I may as well ask my question :) Right now I've got a USRobotics wireless router and when I'm in my bedroom, I get only about 60% signal strength. Which is enough for the most part, but every know and then I drop packets which is pretty annoying and the...
  9. T

    9800 Pro Cooling

    I have the vga silencer on my ati 9800 non-pro. It works amazingly well, actually. I highly recommend it. Incidentally, I purchased it from frontier as well, but from the b&m store. With stock 9800 non-pro HSF and no mem coolers, I was stuck at about 330/330. With the vga silencer (fan on...
  10. T

    Radeon 9800np @ 446/387 after flashing to Pro BIOS and with BGA RAMsinks!!!

    Are you guys all using regular stock cooling for the core of the gpu?
  11. T

    Toasty HyperX???

    Hmm... interesting post. I have 2 sticks of HyperX 3500 as well and they are burning hot too! It seems to be stable, though i'm only running them at 354. I couldn't get them stable at anything > 412 on my 8ik1100. I wonder if heat's the prob (but I am running only 2.5V!)
  12. T

    Booting to DOS with a USB drive?

    Hi all. Does anybody know if the lexar media USB Jumpdrive can boot to DOS? I have a GA 8IK1100 motherboar. Thx!
  13. T

    CPUs that you have overclocked in the past

    Heh. Ahhh... the good 'ol days of changing timing crystals on like.. 8088's and 286's and 386's. haha... funny. i remember I even used a stack of pennies as a heat sink for my 386sx-16@25!
  14. T

    New 800MHz FSB OC results.

    I'm still trying to find the sweet spot, and I've got pc2700 ram only right now so I have to use a 3:2 divider and am not sure if the ram is what's holding me back or not, but my 2.6C is sitting on my machine somewhere around 3470 or so. As I mentioned, I can post and bench at up to about 3530...
  15. T

    Just got me a P4 3.06, now at 23 x 157 / 1.65v

    Nice job Mingon. As we mention in our pm's my limit for my 3.06 was 3.5. What kind of "toasty" temps are you getting?
  16. T

    Fastest CPU for older KT266A board?

    Wouldn't it work, just not at 333 fsb unless your particular board can oc that high? i mean, it'd just be like underclocking instead of overclocking :)
  17. T

    P4 2.4c 2.6c retail HSF design ?

    my 2.6C is like the regular ones... #3 by your descriptions
  18. T

    Fastest CPU for older KT266A board?

    FYI I have a shuttle ak31a kt266a board running a tbred b 1700+ at 2250. I had to cut... some bridges, can't remember which ones, to enable the remapped multipliers (i think it's 7-->15, 8--> 16, and 9-->17 or something like that).
  19. T

    To be or not to be: 2.4 or 2.6C :-)

    I said I'd post back after I got my chip so here I am. I got a 2.6C. It's running 3472 on my koolance right now, idle 32 load 41. Ram at 3:2 'cause I got crappy pc2700 (waiting for my kingston pc3500 to arrive). I can't tell if I've hit the limit of my cpu or if it's 'cause of my crappy ram, so...
  20. T

    To be or not to be: 2.4 or 2.6C :-)

    I went for the 2.6C just for that reason... can let you know how it goes once I get it (hopefully tomorrow)
  21. T

    Which LCDs now come with a 16ms response time or better?

    Some of the things that "annoyed" me with the benq fp767 I had were : 1) the darks are REALLY dark... too dark. 2) I could see the pixel grid which bothered me a lot too. 3) the screen was too contrasty.. it hurt my eyes. Do you notice any of these things on the others? Apparently they all use...
  22. T

    Can anyone help me figure out why Im getting such a low score

    did you install the intel agp chipset driver? newest ati catalyst's?
  23. T

    P4C 2.4 @ 271 fsb on IC7

    Wow... raided raptors. 2300 HD scores.. friggin' nice. My 2xdm+9's get me 17xx and I thought that was pretty fast! Anyway... when you oc'd did you lock the pci bus?
  24. T

    How is the Hitachi CML175B LCD?

    I think the "B" is for black, isn't it? I had a monitor that uses the same screen as the hitachi, and i didn't like 1) the darks were really dark and 2) if you look closely you could see the pixel grid. Relatively minor things and I know TONNES of people who couldn't see what I was talking...
  25. T

    <<< Gigabyte 8IK1100 and P4 2.4B SL6RZ, and P4 3.0C SL6WK >>>

    Okay, thanks for the info guys. That's what I thought too but the GA website has the "ata-133 raid" logo there. I guess if I want to swap out my 8inxp then i haveta get the 8knxp. boo! :) oh well.
  26. T

    <<< Gigabyte 8IK1100 and P4 2.4B SL6RZ, and P4 3.0C SL6WK >>>

    fl62, I was looking at that board as well and i was wondering if I could ask you a few questions about it, since it seems to have a bit of differing information from the GA website. 1) does it really have regular parallel ata-raid? The info on GA's website says yes but the picture does not show...
  27. T

    AK31A + TBred

    Not true. I have a tbred in my ak31a v3.1 working just fine. In fact, I've got it running at 2250 - might be able to get more but my cooling isn't the best in that system. LMk if you have questions.. there's a good thread over at www.amdmb.com's forums as well.
  28. T

    P4 3.06 is good for overclocking?

    Hi, to answer your question, I can tell you what I've seen from my experiences with the P4 3.06's. My friend has his on an Exos at 3.4, I have mine on a regular koolance case at 3.5. Temps for both of us max out at about 44-45C under full 100% load (that would be prime95 & seti & 3dmark all...
  29. T

    Packed with irony: A ROCK fixed my video card (Ideas?) - Yes I'm serious!

    it sounds more like you have a broken trace somewhere, and that the weight of the rock is putting enough pressure to warp it just enough so that the traces are reconnected... at least to me it does :)
  30. T

    Mod Please Delete This Post

    hehe... dude I think you posted in the wrong forum? just trying to help out a fellow canuck :)
  31. T

    oc p4 3.06 533fsb?

    I have mine at 152*23 = 3.49 on a koolance... my friend has his at 147*23=3381 on an exos... so I would figure about 140-150 on regular air as well.
  32. T

    how do i o/c a P4 3.06 ?

    Lou, would that be your 1st, 2nd, 3rd, 4th, or 100th 3.06..? :) I always see your threads about different processors it makes me dizzy! Don't get me wrong - I'm jealous is all it is. hehe. My particular 3.06 seems to top out at 3.49.
  33. T

    0310 DLT3C 1700+

    I think they meant what cooling for your cpu, no?
  34. T

    Question about my P4 3.06Ghz

    personally, i think lapping the cpu would be a bit excessive...
  35. T

    what's the dif between audigy 1 and audigy 2?

    I have Cambridge Soundworks FPS2000's. They are 4 point w/subwoofer.
  36. T

    what's the dif between audigy 1 and audigy 2?

    Hi guys. just wondering what the difference is exactly, and if it's worth it to go for the audigy 2 over the audigy 1 or save a bit of cash and just get an audigy1. I'll be upgrading from a SB Live. In fact - is it worth it to even upgrade at all..? I've read the "propaganda" at creativelabs but...
  37. T

    For a gamer: 17" LCD or 21" CRT?

    I personally like my LCD (i have the BenQ FP767). I don't have any problem with any of the games I play on it. The biggest advantages for me though, are that I can see the monitor in the sun (can't see my CRT), and there's no flickering and no refresh rates. There are also no geometry problems...
  38. T

    Please give your recommendations on these 2 LCD monitors

    For what it's worth, I'm evaluating a BenQ FP767 as I type. The colours are excellent - very very vibrant, much more so than most of the other LCD's I've seen (and I've seen quite a few). The response times are excellent, the contrast ratio is really good as is the brightness. I am not crazy...
  39. T

    should i get a 3.06?

    Thanks ketchup.. but that was just one person, who may or may not have been lucky. I dunno - i mean, i see people like Erikean and... shoot, forgot the other dude now but they got like... 3.5 outta their 2.4's, so I'm thinking 3.5 ish outta the 3.06 is reasonable. But, you know, heck - if 3.6...
  40. T

    Should I overclock my 1600+?

    can't you just change the multiplier and keep it at 133 if you're worried about the ram?
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |