Search results

  1. R

    2.4c oc--I am confused

    well, it is 2.5 @ pc3200 speeds... and you have 2 sticks... by the time you factor in an undervolting board... I would see if you can find a couple sticks of better ram... if they dont improve your OC, send em back. can you increase the mem voltage above 2.8? I am incredibly skeptical of...
  2. R

    2.4c oc--I am confused

    are you sure you're saving the changes when you exit the bios? if there are no performance modes on, you are at 3-3-3-7, and a 3:2 mem ratio, agp/pci is fixed, you should get a better overclock. however, we are not guranteed anything.... overclocking is a luck of the draw deal. what are your...
  3. R

    Which P4c to buy?

    listen to old fart... i have a 2.4c.. imo the fsb is pushed too far... 2.6 should do nicely.
  4. R

    Agressive Memory Timings Comparison

    if you're overclocking, get expensive ram... especially on an athlon system... if not, you're wasting your money... spend that extra money on a videocard.
  5. R

    Newb question: Does higher performance RAM matter if not OCing?

    yes, you can decrease the latency... improving performance overclocking the ram isnt the only way to make it faster. but for the most part, I think your intuition is correct... if you have a 800fsb processor/chipset... and you aren't overclocking... get pc3200.
  6. R

    Low Scores, why? 2.54Ghz @ 3.06 using only 1.28volts! COOL AND QUIET!

    increase the ram voltage, increase the memory latencies... the most effective numbers are the first and last... so for instance, in a 2-2-2-5 module, you can make it run at a higher speed if you change the latencies to 2.5-3-3-7. Try running the ram at 2:3 cpu:ram... that would be ddr...
  7. R

    How does this seem for cooling an overclocked 2.4c?

    rofl, uh... with that setup you are going to get 3 ghz... just don't skimp on ram. How much past 3.2 ghz is the question... most people can get 3.3-3.4 on air (ram problems aside)... If you're looking for 3 ghz, you shouldn't be let down.
  8. R

    2.4C, P4P800 non-deluxe @ 266fsb Final

    that sandra score is sweet... I believe using the performance modes on the ic7 have killed my raptors and memory for some reason... @ 270 fsb 5:4 800 nbs, I get 5100/5100 on mem bandwidth on sandra. Before I began my overclock, I got 69k on the hd bench and now I get 62k... doh! I like the...
  9. R

    Buying P4 Heatsink Combo In Morning - Pick from my List - HELP

    I would strongly suggest against the slk800, as the base does not completely cover the cpu... I switched to a mcx4000b and love it... if you go with an slk, I would suggest a high cfm fan... so that you can truly benefit from the design... I don't think that an increase in cfm would cool...
  10. R

    2.4c problems

    AMBIENT TEMPS must be taken into consideration... no, his hs/fan is not that much better than yours... A. his room is probably cooler and or B. your mobo might over read temps. amoralist, check and see that you have changed your memory ratio... ie to something like 5:4, so that your memory...
  11. R

    Heres a new benchmark for u guys to have fun with...PiFast

    Program : PiFast version 4.2, by Xavier Gourdon Computation of 10000000 digits of Pi Method used : Chudnovsky Size of FFT : 1024 K Physical memory used : ~ 61355 K Disk memory used : ~ 0.00 Meg ------------------------------------------------------------ Computation run information : Start ...
  12. R

    Nascar Racing 2003 FREE! or w/ Microsoft SideWinder FF Wheel $22 AR shipped free

    salvador, I agree with you on F1 and cart... nascar does suck... There are quite a few nascar drivers that can race open wheel.... robby gordon (should have won indy 2 years ago) and tony stewart.... as well as christian fittipaldi (if he hadn't got his lunch eaten by the nascar boys...
  13. R

    My new 2.6C and IC7 Experiment

    wow.... your 2700 pieces are killing my 3500.... I gotta figure out what the hell is going wrong...
  14. R

    My new 2.6C and IC7 Experiment

    ya, I agree on the performance settings... I can't even get fast to run @ default w/o errors... but I have done the afore mentioned procedure and cannot recreate the scores... what sandra version are you using?
  15. R

    My new 2.6C and IC7 Experiment

    I'm testing right now @ 270 fsb on a 2.4C and IC7... the board undervolts on freaking everything... I am running @1.575 in bios, but its about 1.55ish. DUDE WHERE DID YOU GET THAT SANDRA SCORE! I'm using khx 3500 @ ddr 432 @ 2337 and the best mem bandwidth I have ever obtained was in the...
  16. R

    2 questions about MCX4000

    1. There are little pins in the stock retention bracket... you have to push the pins up from the bottom of the mobo. After they have been pushed up then, the stop is free to pull through the mobo. 2. I would suggest having the fan blow down rather than suck away :-)... for me it was about...
  17. R

    *** Official ABIT IC7/G (875P) Thread ***

    so far, I really like 1.3... sandra mem bandwidth went up around avg. 50 points... and bf1942 hasn't crashed yet knock on wood... no reformat is necessary for sata raid0 setups with this one either! I am also able to perform the same overclock with less mem voltage and cpu voltage...
  18. R

    Best Case in the world?

    no I was talking about the tt v1000-d.
  19. R

    *** Official ABIT IC7/G (875P) Thread ***

    killerbob, be sure to flash the newest bios before you install anything on a sata raid array.... learned that one the hard way... oh well, with the raptors and the proccy, it takes less than 20 minutes to install windows... dont try anything fancy until you install EVERYTHING... then start...
  20. R

    Best Case in the world?

    well, I will say that I love the case... however, 1. the fans are quiet because they dont push any air :-) 2. the whole package weighs about 70lbs... that aint going to a lan (all components installed) 3. while the incredibly large case allows for easy wiring, the rheobus and all the...
  21. R

    CPU Cooler for new 800MHz P4s

    well, if you're not overclocking, I would go with the stock hs/f... installs easy and does the job... otherwise, I have been very pleased with my swiftech... have not used a zalman, but i'm sure it's great too...
  22. R

    To be or not to be: 2.4 or 2.6C :-)

    well, you should base your decision on the ram you have... higher fsb's of the 2.4 require better ram to run at 5:4... I think they will both overclock to similar points... You might also have to worry about motherboard constraints and other factors running at a higher fsb... 2.6 costs...
  23. R

    *** Official ABIT IC7/G (875P) Thread ***

    you're going to need to take out the ide drive or disable boot from other devices.... I would disconnect the ide ribbon from the mobo... set all boots to cd-rom... and go from there... but you are going to want to set all your raid info before installing windows I think... so hit ctrl + i...
  24. R

    *** Official ABIT IC7/G (875P) Thread ***

    hey nsf4, what will your kingston run? I can only get mine to do 208 @ (2.8v board undervolts though so its like 2.74ish) 2-3-3-7 I'm thinking that more voltage would get me where I want... EVERYTHING undervolts on this board...
  25. R

    *** Official ABIT IC7/G (875P) Thread ***

    mnahmia, you have to go into integrated peripherals, onchip ide device... there, at the bottom, you will find something like "on chip sata", that will need to be enabled, and you will also need to select "raid function" to enabled if you want to run them in a raid array... the 1.1 bios should...
  26. R

    *** Official ABIT IC7/G (875P) Thread ***

    I have 2 raptors on the sata channels. 1 maxtor ide on ide2 and 1 dvd and 1 cd-rw on ide 1. ide works just fine with sata.
  27. R

    Can you DISABLE Hyper-Threading with your P4c ??

    yes, it's in the bios.... bah, 3rd or fourth one down... and should be at the top or the second from the top under that header. It's not in pci, it's not in the first or second from the top either... try the others... can't remember exactly which one... but it's definitely in the bios.
  28. R

    P4C 2.4 @ 271 fsb on IC7

    yes installed iaa, at 128k... the article I posted previously seems to indicate 16k is best for overall performance.... so, if you are in the position of re-doing your array, I would make it 16k... but as I lower my fsb, my hd scores increase.... for me anyway, increasing the fsb past 250...
  29. R

    P4C 2.4 @ 271 fsb on IC7

    just scored 65k after installing sp1 and all other available updates.... I don't understand why.... I score 67 w/out sp1... overclock... and then have to install it to recreate my scores. Must be some sort of driver error (heh probably caused by an unstable overclock... doh), but if anyone...
  30. R

    P4C 2.4 @ 271 fsb on IC7

    review This is on asus boards.. The guy got the exact same area I got... in the very upper 60's on sandra... I got 67412 right off the bat with default everything... now that I have begun overclocking, my hd score is hovering around 52k. This should not be happening... I decreased the...
  31. R

    P4C 2.4 @ 271 fsb on IC7

    changed fsb to default and mem to 1:1 (after bios crash :-) ), sandra 56000... I am running out of ideas... I dont know what is up... oh, and on the cpu temps, I really was having a heating issue I think.... cpu fan was on backwards :-) DOH! Im a noob.... heh
  32. R

    *** Official ABIT IC7/G (875P) Thread ***

    I am experiencing dramatic decreases in raid 0 performance from my raptors when I increase the fsb. There is an inverse relationship to performance and fsb. As the fsb is raised, hd performance goes to crap. I have experienced moderate success when putting n/b at 800, it gained back close to...
  33. R

    P4C 2.4 @ 271 fsb on IC7

    ya, I just had my sandra scores bump up to 55000.... I gotta go back in the bios and figure out what the hell I did... one time, I just changed my pci latency like techno suggested, and it brought sanda up... next couple times I boot windows, it hits 55000.... just made some more changes...
  34. R

    P4C 2.4 @ 271 fsb on IC7

    stable at 260 fsb... passed prime95 for first time... haven't tried memtest or any other... Does anyone have any ideas why the hd scores have plummeted? What could cause such a dramatic decrease? Much of the system seems lethargic and as I have decreased the fsb, it seems less so.... am I...
  35. R

    P4C 2.4 @ 271 fsb on IC7

    yep, agp/pci locked at 66/33 I posted too soon LOL, prime runs for about 10 minutes! doh! I'm on it though... will decrease fsb until stable and will repost in next couple of hours after little memetst and prime95 Im kinda pissed because now my proccy wont do what my ram will... (at 5:4)
  36. R

    P4C 2.4 @ 271 fsb on IC7

    Ok, finally got around to overclocking the 2.4.... look at system specs for all details on system: Bios v1.1 2x512 Kingston hyperX 3500 2x Western Digital Raptors in raid 0 on ich5 Antec True 550w Swiftech MCX4000 w/ Antec Smartfan I (I had a vantec tornado and an slk800u on this before and...
  37. R

    *** Official ABIT IC7/G (875P) Thread ***

    I have had 0 trouble with 2x512 of pc3500 hyper X.... with both bioses.
  38. R

    HELP THOSE SATA RAID EXPERTS!

    use 2 identical drives.
  39. R

    wd raptor rocks...

    The raptors are quiet.... and they do run a little hot... but most hd's do and I would suggest cooling for any hd. Sandra (newest) 67412 PCMark02 2361 Raid 0, Abit IC7 BF1942 loads 3-5 seconds faster per map. Boot time is decreased by 3-5 seconds... (even with raid...
  40. R

    *** Official ABIT IC7/G (875P) Thread ***

    correction, if you are using serial ata drives in raid 0... it will require a fresh install of windows.... so flash before you install :-) The new bios corrects or adds some serial ata features, and they screwed my raid 0 array... but now everything is kosher, just had to repeat the whole...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |