Thanks, but bascially the main 150 gig drive was really messed up and I checked it with some diagnostic tools and it had bad sectors so I am 'writing zeros' to the drive now. Here is the new problem though...
Okay so yesterday my main C drive got messed up on reboot. But I had 2 other drives...
Okay so yesterday my main C drive got messed up on reboot. But I had 2 other drives (74 gig raptor and a 36 gig raptor) in the computer as storage. Okay when I initally went to check if all the drives were being read in the windows installation setup I deleted the partitions, but didn't reformat...
After further examination it looks like my partition table is messed up. Is there any type of tool or command to delete these and rebuild it into a bootable partition? For example I had my 150 gig raptor partitioned into drives C: and D: .
Drive C was the 30 Gig OS and Programs, Drive D: was...
Tried that and fixboot, fix boot said it reset it. Fixmbr did nothing or apparently nothing. Pressed enter and it just went down one line to the C:> prompt. Rebooted same message.
HELP PLEASE:
Okay so I was just playing Commmand and Conquer 3 and the game froze and I was waiting for it to crash out, but was forced to use the reset button. After reseting the machine posted fine but it was a tad slower than usually all hardrives and such were detected just fine but when...
Okay so everything is running fine on my system with the P5W DH except my Plextor 755SA sata burner, it seems to be burning extrmely slow. After further investigation I found a post where someone said this is fixed after installing the Intel Matrix Raid Drivers.
Does it matter if my SATA...
Thanks for the advice, I think I may not mess with OCing the FSB until I get a more agressive Heatsink. I wish Thermalright would release that 120 extreme tower. FYi I do create content in Maya and use Photoshop CS2, but mainly I get intel chips for free or half price through a family member -...
Thanks For the detailed answers. I appreciate it.
A few questions concerning the FSB @ 266. Is it worth it to bump it up to 400mhz? I understand that there is risk of instability and such. Are most people with DDR2-800 using this setting? and is it safe to leave the CPU voltage at auto if I...
I have just built a brand new rig with the P5W DH Deluxe(except for the video card as I am waiting for the 8900s or new ATI card) here are the specs.
Intel QX6700
2 gigs: Corsair Twin2X2048-6400C4D (4-4-4-12)
1xWD1500ADFD Raptor
1xWD740ADFD Raptor
Plextor PX755-SA (connected to SATA port...
Hi all, I had a quick question about the 2 'Ez Raid' Sata Ports. I haven't put everything together yet as I await my cpu and other components, but I was curious to know if those 'Ez Raid' ports at the bottom of the board can be used in non-raid mode? I'm hoping so only becuase I would like to...
Okay so I was doing the file benchmark system on sandra RIGHT after I unchecked file indexing on my RAID 0 drive, it rebooted went through the BIOS, then when trying to boot from OS it comes up with an error about selecting a correct boot device, Then I went to the fastbuild utility that display...
I put a new computer together with the ASUS P4C800d and heres the specs so far:
2.4ghz p4 (A)
2 gigs of Corsair XMS Twinx1024x3200LL(matched Pair)DDR400
Asus P4C800D (i875 Canterwood)
2 WD360 Raptors SATA
Geforce 4 TI 4600 (albatron medusa w/thermaltake fan and tin coated copper ram sinks)...
Here are my specs:
2.4ghz p4 (A) 400mhz FSB
2 gigs of Corsair XMS Twinx1024x3200LL(matched Pair)DDR400
Asus P4C800D (i875 Canterwood)
2 WD360 Raptors SATA
Geforce 4 TI 4600 (albatron medusa w/thermaltake fan and tin coated copper ram sinks)
420w Thermaltake Silent Pure Power w/ PFC
Zalman...
Yes I just want to up the FSB to 200mhz so MY ram will run at 400mhz. I will eventually overclock my cpu a bit but im fine with it atm. Now IS the RAM divider setting in the BIOS? HOw would I change that or in the BIOS what would that setting be called? If I did want to overclock the CPU and the...
Okay so I got my rig built and want to just up the FSB becuase I have 2 gigs of Corsair TwinX matched pair RAM and would like it to be fully utilized. From what I've been reading I need to change the FSB in the BIOS, but then I'm getting nervous and confused about voltages and such...I just want...
Okay I just put a new rig together here are the specs:
2.4ghz p4
2 gigs of Corsair XMS Twinx1024x3200LL (matched Pair 512MB DIMMS) DDR400
Asus P4C800D (i875 Canterwood)
2 WD360 Raptors SATA
Geforce 4 TI 4600 (albatron medusa w/thermaltake fan and tin coated copper ram sinks)
420w Thermaltake...
Okay so I've put together a new computer and all the hardware is working correctly and heres the specs:
2.4ghz p4
2 gigs of Twinx Corsair DDR 400
Asus P4C800D (i875 Canterwood)
2 WD360 Raptors SATA
Okay so I set up or tried to set it up as RAID 0, I set up the array rebooted, and made sure to...
Im setting them up as raid 0 as well. but having some trouble. First did you need to change the jumpers on the drives for master/slave? Oh and I did get it to work, when I installed them i didn't change the jumper which are on cable select by default, does that affect these types of drives or...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.