Search results

  1. M

    Bios Beep - Help

    Yes, it running at FF, I have just updated the bios, will do more testing, report back later.
  2. M

    Bios Beep - Help

    Tagan 1100W, the beeping has no set interval? beeps just once, definately a bios beep? Computer works fine apart from the beep??????? or seems to?
  3. M

    Bios Beep - Help

    I have just built my new rig; Intel QX6700 Quad - Water Cooled EVGA 680i EVGA 8800GTX (2 off SLi rig) Memory, Corsair CM2X1024-8500C5D Boot up everything fine, simple applications everything OK. Just started to test on COD2, everything set on the highest graphics levels etc, every 2...
  4. M

    Arctic Silver

    I've just set up my CPU & Heat Sink using Artic Silver 5. Do you have to wait for the Arctic Silver to dry for 24 hrs? Can I just start my PC up?
  5. M

    Water Cooling

    I'm currently installing a WC system in my new computer, I have fired up the WC system, pump runs OK, however, it is full of micro bubbles which I'm trying to bleed out. I think I have a problem, my resevoir; http://www.thecoolingshop.com/product_info.php/cPath/33_61/products_id/1773 My...
  6. M

    SLi Set Up

    I'm still building the computer, CPU isn't in yet, or the water cooling or the HDD.......
  7. M

    SLi Set Up

    OK, so I plug my monitor in either position 1 or 2? right?
  8. M

    SLi Set Up

    I may be being a bit stupid, but.... which of these ports connect to my monitor 1, 2, 3 or 4 or a combination? http://img155.imageshack.us/img155/6085/dsc00679zn3.jpg I have 2 x 880GTX for SLi configuration.
  9. M

    Water Cooling Diagram

    D-Tek Fuzion CPU + Laing DDC-1T
  10. M

    Water Cooling Diagram

    Which of these setups is the best/correct? anyone got any other diagrams; http://img216.imageshack.us/img216/7082/scan0001zj3.jpg Thnx in advance.
  11. M

    SLi 8800GTX Setup

    I'm in build att the moment, I have 2 x EVGA 8800GTX cards, however, I'm a little bit confused, the SLi connector has 2 positions? which one does it go in? see photo; http://img206.imageshack.us/my.php?image=dsc02742pr8.jpg One last question, I assume I hook up all 4 power ports...
  12. M

    Fan Direction

    I used to design cooling systems in the Auto industry, pullers are always better on performance (you'll notice car radiators always sit behind the Rad). You also have to optimise the distance from the core, by testing. Just wondered if there was any difference in computing?
  13. M

    Fan Direction

    I'm building a new rig, it will have water cooling Thermochill PA120.3 rad. Which way is the best for air flow; 1. Air inside the case blown over rad and out 2. Air inside the case sucked over rad and out 3. Air outside the case blown over rad and into case and out 4. Air outside...
  14. M

    LED Fans

    I'm in the process of building a new rig, but I am a bit confused. The fans which have LED in to light them up; 1. Do they just have a 3 pin connector? 2. Do they have a 3 pin to control the fan and a 4 pin to light the LEDs? Anyone got any diagrams? I'm going to use Akasa FC-03...
  15. M

    Water cooling, can someone help me on which kit to get?

    We get ripped off in the UK, $200 = £200
  16. M

    Water cooling, can someone help me on which kit to get?

    I'm looking into a few things still, what about this kit; O-CuK ApogeeGT Pro2 (PA120.3 - 1/2" Based) Scroll down the page abit; http://store.over-clock.com/O_CuK_Hand_Spec_d_Kits.html
  17. M

    Water cooling, can someone help me on which kit to get?

    I'm just looking to cool the CPU at this stage.
  18. M

    Water cooling, can someone help me on which kit to get?

    Budget = alot Case = Mountain Mod i.e. I have enough room I'd like to know; Pump - very good one, heard the D5? Laing was good Rad - Thermochill 120.3 seem to have a good reputation Blocks - haven't a clue. I need a couple of options for each bit.
  19. M

    Water cooling, can someone help me on which kit to get?

    OK, which system is better? throw a couple of sugesstions at me..:)
  20. M

    Water cooling, can someone help me on which kit to get?

    Ok, if you do the calc's from here (use 25 deg.C Ta); http://www.swiftnets.com/products/h20-120-PREMIUM.asp I get - Standard = 130W x 0.134 = 17.42 deg.C + 25 deg.C = 42.42 deg.C Overclock = 230W x 0.134 = 30.82 deg.C + 25 deg.C = 55.82 deg.C I believe the thermal trottle will...
  21. M

    QX6700 Operating Temperature?

    Thank you, really helped.
  22. M

    QX6700 Operating Temperature?

    Does anyone know what the normal recommended operating temperature of this chip is? Also what is the maximum temp before thermal throttle cuts in?
  23. M

    Water cooling, can someone help me on which kit to get?

    I'm looking to cool just my CPU QX6700, will the Swiftech H20-120 PREMIUM do the job. It's a 120mm Radiator, my VGA cards will stay air cooled.
  24. M

    QX6700 & Water Cooling

    Hello, I was going to go with a Zalmann 9500 air cooler for my rig, but now i'm having second thoughts. Are there any water cooled setups that are recommended for the QX6700?
  25. M

    How much Power?

    I'm awaiting the parts for my new rig (SLi), however, I'm a little concerned wether I have a big enough PSU; 850W Enermax EGA850EWL Galaxy Modular PSU to run the following; Intel Core 2 Extreme Quad-Core QX6700 Zalman CNPS9500-AT Intel LGA775 Aero Flower Cooler EVGA 122-CK-NF68-AR...
  26. M

    New Rig, is it all compatible?

    Hi Guy, I'm looking to construct a new rig, specs below, I'd like to know if anyone can see any issues with any of the components not interfacing properly. I'm particulary interseted in the motherboard to RAM and Graphic card FSB's. 1. EVGA 122-CK-NF68 NF680i SLI, S775, PCI-E(x16), DDR2...
  27. M

    What Memory? A7N8X

    I have an A7N8X mobo which runs 2 x 512MB DDR PC3200. I want to go to 3 x 1GB- Manual says this; Dual-Channel DDR 400 3 x 184-pin DIMM Sockets Max. 3 GB unbuffered PC3200/PC2700/PC2100/PC1600 non-ECC DDR RAM Memory (Twinbank) I have found some memory on eBuyer...
  28. M

    ASUS A7N8X, what graphic card?

    Sure the FSB's match, so I won't get any choking?
  29. M

    ASUS A7N8X, what graphic card?

    I'm running an AMD 2600 with 1GB PC3200 RAM.
  30. M

    ASUS A7N8X, what graphic card?

    I'm currently running a A7N8X mobo and a Gforce4 Ti 4600 128mb graphics card. What's the best graphics card I can get for the mobo that will match up the FSB's, I don't like a choking system.............:confused:
  31. M

    A7N8X MBO CPU

    What is the fastest chip I can get on this MBO?
  32. M

    IE Problem

    This is spooky, I'm definately connected to the internet down loading stuff. When I go on IE I just get the "White Screen of Death" Anyone know whats wrong or the fix?
  33. M

    XP Pro & Punkbuster

    For some reason I seem to have a conflict betwwen Punkbuster and XP Pro in COD. When I play on none PB server everyting runs fine, but on PB servers it runs for about a minute then I get BSOD. Any ideas?
  34. M

    Lexmark Z708

    I have got a Lexmark Z708. What I want to happen is when I press print, a preview screen comes up and shows me what is about to print. Had an Epson computer and this used to do this, however on these Lexmarks it doesn't seem to work/be included. Any suggestions on how I can stop wasting paper...
  35. M

    LCD Response times

    go here - http://www.anandtech.com/showdoc.html?i=1855
  36. M

    CRT or TFT?

    I play online mostly and have a 19" CRT monitor 85Hz which is great. I'm looking at getting a 19" TFT but have a few concerns. 1. Will the picture be the same as the CRT? 2. Are TFT's prone to ghosting? 3. Whats the best 19" TFT around? 4. What other things should I look out for when purchasing?
  37. M

    Do I? Or do I?

    Whats your CPU temp?
  38. M

    Do I? Or do I?

    At what temperatures should I start to worry?
  39. M

    Do I? Or do I?

    Please see my system details on below link. I am currently running 166FSB and 12.5 multiplier. Questions; To overclock this sucker do I? 1. Put the FSB up to 200, hence 200*12.5 =2500 2. is the maximum I can have, 200*17=3400 3. the *17 multiplier is at the begiining shared with the *9, how...
  40. M

    You lot have got me confused, help a noob?

    I been looking and this forum and can't make out how to clock my computer. 1. Do I overclock in the Bios? 2. What do I change in the Bios, example please? 3. Find me a link to the idiots guide to o/c ing please. Boo Hoo
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |