Mine kills me Sound Blaster at 146Mhz :(
No reboot problems though.
I think the 4SDA+ has the advantage of jumpers rather than the BIOS
for adjusting/setting the v-core.
Sounds like the standard cold boot problem where the MB
doesnt supply anything apart from the standard 1.5volts
until the...
166FSB
Ram @ 3.2 volts.
I'm about to starting dropping the RAM voltage down a bit at a time while trying
to stay at 166MHZ.
Reboot problem too.
I think its a AGP Voltage problem :(
Hi guys,
I've got a real major problem here with my BXMaster motherboard and some PC-150 Mushkin HSDRAM I just purchased.
I'll give you some background... The PC-150 Ram from Mushkin requires RAM settings of:
Cas Latency = 2
RAS to CAS = 3
Precharge Delay = 2
to run at anything over 124FSB...
Dude,
Check out this page on the 933EB processor:
http://www.anandtech.com/showdoc.html?i=1247&p=2
See the core voltage figure?
So technically, bumping up the voltage by 0.05 of a volt
isn't technically going out of spec :)
I'm mean, if its good enough for intel... ;)
HEHEHE
Lycan
Hi guys...
Back again :)
I'm having some problems with soft reboots of my PC.
Config is:
P3-700 @ 966 (1.75v).
MSI BXMaster (Latest 5.5 BIOS)
Creative Geforce2 @ 220/365
Everything runs fine but if I do a soft reboot (CTRL+ALT+DEL) on
the computer, it won't reboot. Just sits there with a...
Hi all,
I've heard that increasing the VIO Voltage on the motherboard can help
to reduce stability problems with higher (140+) FSB speeds... anyone
care to offer some results/experience with this??
I've current got a p3-700 running @ 966 (138FSB/CAS3/1.75) and I'm having a few
stability...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.