Search results

  1. M

    Strange Hard Drive Problem I can't figure out

    Hey everyone, My problem is solved, though I don't know how or why I unplugged EVERYTHING, took out all the SATA and IDE wires. Took the chassis out in the hallway and blew all the dust out of it I could. Then connected just the new HD and it seemed to work fine. Installed Windows on...
  2. M

    Strange Hard Drive Problem I can't figure out

    Hmmmm maybe. But then why would it only affect one hard drive and not the other? The 320GB Maxtor is still in there and still gets constant use every day. But when I plug either Seagate in, the freezes and spins happen. Its not the cables either - I've tried every combination of...
  3. M

    Strange Hard Drive Problem I can't figure out

    Hey all, I built a computer in Jan 2004 that included the following components motherboard: ASUS A7N9X-E Deluxe hard drive: 160GB SATA Seagate Baracuda 7200.7 Everything worked great for many months. Eventually I added a second SATA hard drive for data (Maxtor 320GB) and everything...
  4. M

    Any current deals on UPS Battery Backups?

    I wasn't concerned with keeping a HT running during a power loss. Just the tivo so it would keep recording if I lost power during one of my shows. And this thread was dead within 4.5 hours of me creating it, its other people that brought it back 2 weeks later! :) Thanks for all the...
  5. M

    Any current deals on UPS Battery Backups?

    I did a search, there were no deals that were still active
  6. M

    Any current deals on UPS Battery Backups?

    I'm looking to buy 2 UPS battery back-ups, one for my computer and one for my home entertainment a/v equipment. Are there good deals on any currently? I'm looking to spend under $50 on each, and would prefer them to have about a half-hour of backup time. Thanks!
  7. M

    NEC 3500A won't burn Ritek media at 8x?

    Woops, I meant I had a Toshiba DVD player, not Panasonic. Anyway, I'll check out cdfreaks for hacked firmware.
  8. M

    NEC 3500A won't burn Ritek media at 8x?

    I have another question. I burned a movie onto the Ritek media in question at 4x, and it played fine in my computer, but the Panasonic DVD Player in my living room didn't even recognize it. Have I just bought blanks that will never work in my standalone player, or will future firmware updates...
  9. M

    NEC 3500A won't burn Ritek media at 8x?

    Nobody here is trying to burn dual layer, just plain old 8x single layers...
  10. M

    NEC 3500A won't burn Ritek media at 8x?

    I didn't need a driver. I just plugged it into my system and booted up and WinXP recognized it.
  11. M

    NEC 3500A won't burn Ritek media at 8x?

    I always insert it first...
  12. M

    NEC 3500A won't burn Ritek media at 8x?

    I don't even know where the settings to attempt a DL burn are... Any other ideas?
  13. M

    NEC 3500A won't burn Ritek media at 8x?

    OK, I bought a spindle of 8x DVD+R Ritek media from newegg Link I have a NEC 3500a, and am using Nero 6.3.1.20 When I go to burn, my only options are 2.4x or 4x... What am I doing wrong? By the way, this is what DVD Identifier says about the media...
  14. M

    Can overclocking break an OS?

    Hello, I recently tried overclocking my Barton 2500+ on my Asus A7N8x-E Deluxe motherboard (I have a two 512MB sticks of CorsairXMS PC3200 memory). Leaving all other settings at default, I could get my FSB up to about 185 or so before it would be buggy inside Windows XP (SP1a). Everything...
  15. M

    New Corsair PC3200C2 ram won't run at 400mHz.

    I'm having a similar problem with my CorsairXMS PC3200C2 ram.... Built my new computer (see sig) and ran everything at stock (333 FSB) for a week or 2. Then tried upping the FSB to 400 and it wouldn't boot. So I tried various settings between 333 and 400 and found that up to 350 it worked...
  16. M

    The future of DVD Burners

    Belzer, what is Cebit? So when these 16x and/or dual-layer drives come out in late spring or summer, would they be worth buying, or is it always good to wait a few generations for new burning technology?
  17. M

    The future of DVD Burners

    Hello, I recently assembled a new system for myself, but the one thing I didn't get is a DVD-Burner. I didn't get it because 8X drives are still fairly new, I wasn't sure if prices would be going down more, and I wasn't sure what the future of DVD-burners was. Does anyone know: When are 12x...
  18. M

    Installing Win XP Pro from MSDN Subscription

    Well it worked. I used the original MSDN disc and it was in fact bootable... I'm not sure why I thought that it wasn't (I might have tried to use it in another computer once whose cd-rom drive wasnt bootable and I thought it was). Got everything up and running now, now all I have to do is...
  19. M

    So I have 5.1 speakers and a 5.1 sound card, but I can't watch dvds in 5.1?

    I figured it out... for some reason, the WinDVD 4 that came with my video card didn't output 5.1 channels, but the WinDVD suite that came with my motherboard does.
  20. M

    So I have 5.1 speakers and a 5.1 sound card, but I can't watch dvds in 5.1?

    Hello, My motherboard (ASUS A7N8x-E Deluxe) came with a free copy of Intervideo WinDVD suite, my DVD-Rom (Lite-On 16x) came with a free copy of PowerDVD 4.0, and my video card (Powercolor Radeon 9700 Pro) came with a free copy of Win DVD 4. However, it seems that all 3 programs are limited to...
  21. M

    Installing Win XP Pro from MSDN Subscription

    about 1/4 of the way down the page.... "You need to do this procedure on a Win2k computer, otherwise slipstreaming will generate errors."
  22. M

    Installing Win XP Pro from MSDN Subscription

    Found the answer to my own question: According to this page http://old.bink.nu/Bootcd/default.htm you have to be running win2k or winXP to initiate a slipstream.... oh well.
  23. M

    Installing Win XP Pro from MSDN Subscription

    There is no bootlegging involved... I am a valid MSDN subscriber, and I am using the actual real cd. For some reason, I thought that I had heard that the WinXP cds in an msdn subscription were not bootable... and to be honest I didn't even check. I still have a question though - Can I...
  24. M

    Installing Win XP Pro from MSDN Subscription

    Hello, I have an MSDN subscription. I want to install Win XP Pro onto a brand new machine whose hard drive has never been even formatted using the msdn cd. However, the msdn cd is not bootable. I was thinking I could just make a boot floppy, but when I tried it, it asked for 6 blank floppys...
  25. M

    Help! Freshly built computer won't even beep at me!

    Yup I did get rid of those rear fan grills... just had to use a sharp cutting tool, then file the edges down. I don't know why companies still make cases with such restrictive grilling. Yup I have a total of 8 fans in my case - CPU fan, video card fan, a 120mm Antec blue led in the front, two...
  26. M

    Help with Enermax case (rainbow lights, front temp display)

    Nevermind I figured it out. What happened was, this case came with a PSU that I decided not to use. The power supply I am using in the Antec True Blue 480 which had nothing to connect the weird 2pin plugs to. Well, I looked at the power supply that came with the case and found 2 extensions...
  27. M

    Help with Enermax case (rainbow lights, front temp display)

    Hello, So I just assembled my first computer from the ground up and I managed to plug everything into were its supposed to go (I think) except for one thing. I have 2 wires coming out from the front panel of my case that I have no idea where to plug in. They are the power cords for the front...
  28. M

    Help! Freshly built computer won't even beep at me!

    Nevermind... as soon as I posted that message, I unlplugged the SATA cable and turned it on and it worked! Then I turned it off, plugged it back in, turned it on, and it still works! So I have no idea what that was all about.....
  29. M

    Help! Freshly built computer won't even beep at me!

    So I just assembled my computer from the ground up for the first time. Got everything plugged in and wired and hit the power switch. Nothing happens. Well, all the fans light up and start spinning (including the CPU fan and video card fan), and I can hear the hard drive make a little noise...
  30. M

    Dell 2001FP 20" LCD for $749 no rebates IS BACK!!! [thru 2/9]

    I'm still trying to figure out if I should get in on this deal.... How long do you think it will be before a deal like this comes along again?
  31. M

    Budget ATI cards?

    newegg doesn't carry anything in the 9500 line, and the powercolor 9700pro is the only card they have in the 9700 line.
  32. M

    Hows this rig?

    Yup that is exactly why I bought the $6 floppy drive.... for installing winXP. I doubt I'll ever use it again after that unless I need to reinstall the OS. SirDude, sorry, that case doesn't really appeal to me. I went with the enermax 31881ta. nitromullet, I will have a 120mm fan in the...
  33. M

    Hows this rig?

    Optimistic - yes, there is a guy here at work that does that to fan grills all the time... I'll ask him to do it for me. Thanks again...
  34. M

    Hows this rig?

    Optomistic, I wanted a case with a front temp display and side window... newegg didn't have a lot with those characteristics. Do you think I should go with something like the Aspire X-Dreamer II? Link Pics
  35. M

    Hows this rig?

    Optimistic, I liked this IBM mouse not only because its optical, ergonomic, with a side button and a scroll wheel, but the scroll wheel glows blue :) Totally goes along with my black keyboard, speakers, and case (which has glowing blue fans). All I need now is a illuminated keyboard (Why...
  36. M

    Hows this rig?

    All from newegg except the mouse: Athlon XP 2500+ retail $90 Asus A7N8X-E deluxe retail $116 CorsairXMS PC3200C2 2x512=1gig $209 Powercolor 9700Pro retail $219 Enermax CS-31881TA case $79 Lite-On 16X DVD-Rom OEM $31 Seagate SATA 120gig 8mb buffer harddrive OEM $123 Samsung Floppy Drive OEM $6...
  37. M

    Budget ATI cards?

    Thanks everyone. I was going to get the Saphire 9600XT OEM for $158 until I saw that it is out of stock... I think I'll bite the bullet and get the Powercolor 9700Pro instead...
  38. M

    Budget ATI cards?

    What is so bad about the 9800SE? What if I could overclock the Saphire 9800SE, would it then be better than the 9700Pro?
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |