Search results

  1. A

    core temp .95.4

    Yup, the temp readings seem fixed for my e6850. :-)
  2. A

    Need help diagnosing temp readings

    By using TAT to give it a full thermal load, here are the readings now (which are corrected): (e6850 3GHz G0 Proc and a GA-P35-DQ6 motherboard) Tcase: 64c Core 0: 75c Core 1: 74c Core 0: 25c to Tjunction remaining Core 1: 26c to Tjunction remaining
  3. A

    Need help diagnosing temp readings

    So right now, this is what CoreTemp shows: (Idle sitting here as I type this post) Ambient room temp: 24c Tjunction: 85c Core 0: 21c Core 1: 21c In SpeedFan my Tcase temp is 30c. (I'm assuming this is correct and doesn't need the +15c added to it?) So, if I "correct" those, it...
  4. A

    Need help diagnosing temp readings

    Thanks for the reply, I appreciate it. I also have Core Temp 0.95 and it gives me the same (close enough) readings as Speedfan and TAT. They all match up for the core temps. All three programs are boderline between 25c and 27c. Right now Speedfan and CoreTemp 0.95 are reading the exact...
  5. A

    Need help diagnosing temp readings

    I'm been reading about this a lot and I just can't understand what is going on here. I've read the temperature guide at Tom's Hardware and that makes sense. What doesn't make sense is the readings that I'm getting on my system. My mobo is a GA-P35-DQ6 with an e6850 3GHz proc - defaults on...
  6. A

    Whats up with this adding +15c to temp readings?

    So is it safe to say that my reading of 27c delta to tjunction is accurate even though it reads 85c?
  7. A

    Whats up with this adding +15c to temp readings?

    So on my e6850 the tjunction is set at 85c. Then when I was running with a full load, core temp showed a delta between tjunction as about 27c. But I thought the procs had an incorrect tjunction? I read somewhere that my procs tjunction should be 100c. heh - more confusion - sweet!! ;-)
  8. A

    Whats up with this adding +15c to temp readings?

    I remember that all of mine read the same thing too, including CoreTemp 0.95. This is crazy.. So basically none of us really know what the real temp of our stuff is.. haha So is this an Intel bug in the proc or what? I do know that my e6850 shows the tJunction as 85c but that I heard...
  9. A

    Whats up with this adding +15c to temp readings?

    Hey all.. I've seen people mention that you have to add +15c to your temp readings. Is that just for some procs or all of them? How do I know if I have a proc that I need to do that with? Mine is an e6850 3GHz C2D. The next question I have is what program will display the proper...
  10. A

    CPU Temps for Stock e6850 (3GHz)

    bump - trying to get an answer for my previous two posts.
  11. A

    Gigabyte P35 Motherboard Thread

    Hey guys, I put my GA-P35-DQ6 system together last night with an e3850 proc and 2 sticks of the Ballastix Tracer DDR2 800 ram. I loaded the bios and set to optimized settings and installed XP. One thing that I did not change was the voltage for the ram. So I'm guessing it's running at 1.8v...
  12. A

    New Rig

    I got the P182 case myself and man, what a great case. I'm glad I spent the extra cash for it. I'd go with it for sure. I also just bought a new system and I just put it together last night. I went with the Corsair 620hx PSU - look up the reviews on that one. It's rated a very quiet PSU and...
  13. A

    CPU Temps for Stock e6850 (3GHz)

    @nyker96: I thought that the +15 thing was only for certain procs. How do I know if mine is one of them? If you're right, then my temps are about 73c? (58c + 15c) For some reason that doesn't sound right. Can anyone else chime in here and help me make sure I understand what my correct...
  14. A

    CPU Temps for Stock e6850 (3GHz)

    Here are my 1 hour cpu/video card heat test results: Intel e6850, Stock HSF with AS5, Stock/default BIOS settings, GA-P35-DQ6 mobo, Antec P182 case (Case fans on low) eVGA 8800 GTX 768mb video card Room temp near case: 24c Orthos running on Small FFTs - stress CPU, ATI Tool running the...
  15. A

    CPU Temps for Stock e6850 (3GHz)

    TAT and Speedfan were both showing around 25c idle for the cores. They're both pretty close to one another. Like right now TAT is reading 56/55 and SpeedFan reads 57/56.
  16. A

    CPU Temps for Stock e6850 (3GHz)

    The room temp is 23.8c and the cpu cores idle at 25c. How do I find the CPU temp and the core temps? I'm guessing that TAT shows the two cores. Speedfan has this showing - which is which? Idle Temps for SpeedFan v4.32: Temp1: 46c Temp2: 31c Temp3: -2c HD0: 40c Core 0: 23c Core 1: 23c...
  17. A

    CPU Temps for Stock e6850 (3GHz)

    Hey all, Last night I just put together a new system with a GA-P35-DQ6 mobo, a e6850 3GHz Duo proc, and 2 gigs of ram. I ran ortho last night as well as the ATI tool to see if the system was stable under a system load as well as a video load. Six hours later, the TAT tool is telling me...
  18. A

    P182 owners.

    I have this case on the way right now. You mentioned dampening. What have you read that works well in this case? I'm interested in the same thing. I want this thing to be quiet. -Allistah
  19. A

    Gigabyte P35 Motherboard Thread

    But what about tools to make sure that the system is stable? I used to use Prime95 for 24 hours or more to qualify if it was stable or not. What are you guys using and how long do you use it before you badge your system as "stable"?
  20. A

    Gigabyte P35 Motherboard Thread

    Hey guys.. I just ordered my system yesterday with the GA-P35-DQ6 board, Crucial Ballistix Tracer 2GB (2 x 1GB) DDR2 800 ram (BL2KIT12864AL804), and an Intel Core 2 Duo E6850 3.0GHz Retail. I've read this entire thread about 3-4 times now and I want to make sure I understand what I...
  21. A

    My new spec'd out gaming system - comments welcome

    I went ahead and placed my order for my system. I don't really care for the other slot it's just there I guess and can be used for other stuff if I ever have it. At this time, the only other card I plan on putting in the machine at a later date is a sound card which will go into a regular PCI...
  22. A

    My new spec'd out gaming system - comments welcome

    @chiew: Ok, thanks for the info. I think I'll just get the ddr2 800 as you suggested along with the board that they have in stock.
  23. A

    My new spec'd out gaming system - comments welcome

    @cmdrdredd: Ahh.. Well, I don't have to have SLI today.. I just want to order today. THey don't have the board I want (GA-P35-DS3P) so I was just going to get the other one (GA-P35T-DQ6). It's more money but it has the extra cooling for OCing and -could- support an SLI config if I wanted to...
  24. A

    My new spec'd out gaming system - comments welcome

    So I could still get that mobo they have in stock but just get the DDR2 800 memory instead right? Then I'll be able to SLI later if I wanted and I can still OC stuff, and I can order today.
  25. A

    My new spec'd out gaming system - comments welcome

    Ah ok. I see the difference now. I really want to order all of this stuff at once and I have the itch really bad to get this stuff ordered so I thought maybe that board would work well for me. If they had that other mobo I'd just get the ddr2 800 and call it done but they're out of stock...
  26. A

    Gigabyte P35 Motherboard Thread

    Hey guys.. I'm planning on getting a GA-P35-DQ6 board so I wanted to post my base system to see if anyone sees any issues with it: Gigabyte GA-P35-DQ6 Intel e6850 (3GHz Duo) Proc Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) nVidia 8800GTX 768mb Antec P182...
  27. A

    My new spec'd out gaming system - comments welcome

    I don't know if it does S3 well or not, it's just a gamble I'm going to have to take. :-/ Newegg doesn't have the Gigabyte board that I want in stock but they have another board (GA-P35-DQ6) that uses the DDR2 1066 ram instead of the DDR2 800. Is that just a joke? Money really it's too...
  28. A

    My new spec'd out gaming system - comments welcome

    @chiew: The reason I was going after that mobo was because of the firewire port. I don't really care about SLI. I just want a good mobo that will overclock well, has a good bios, does S3 sleep well, and is stable. I wanted firewire as well so I wouldn't have to get a firewire card for my...
  29. A

    Need help with choosing DVD burner and reader drive

    Oh yeah, I'm aware of that issue. Thanks for the suggestions. It'll be interesting to see what others suggest to see if there is a favor to a certain brand and/or model drive. Thanks again, -Allistah
  30. A

    Need help with choosing DVD burner and reader drive

    Hey all.. I've been reading all this info about drives and I can't figure out what I should get so I thought I'd post my concerns and what I need. Then I'm hoping someone can point me in the right direction. I'm looking to buy a pair of drives. One for reading dvds and one for writing...
  31. A

    My new spec'd out gaming system - comments welcome

    Cool, thanks again for the help. I'm a lot closer to having the final list of components due to the help from you guys. I just want to make sure I get the right burners.. Here is where I'm at: Gigabyte mobo 3GHz Core 2 duo (I've read they overclock decently) Crucial 800Mhz ram Corsair...
  32. A

    My new spec'd out gaming system - comments welcome

    Does anyone happen to know if the Lite-On burner I was going to get has a decent dvd rip speed? The model is LH-20A1L-05. I've got a bunch of home movie stuff that I make copies for family and I'd like to be able to rip these things at a decent speed.
  33. A

    My new spec'd out gaming system - comments welcome

    I mis-interpreted what I was having suggested to me. I'm going with the Corsair 620HX or whatever it was. It's a single rail PSU but is advertised as 3. I think I'm pretty sold on the Corsair after reading the reviews that BenchZowner suggested to me.
  34. A

    My new spec'd out gaming system - comments welcome

    I really was going to go for the eVGA boards because they have a lifetime warranty - unless they changed that of course. A lifetime warranty speaks to me - especially when it's 3+ years down the road and it starts to crap out. You know what the warranty on that XFX XXX one is?
  35. A

    My new spec'd out gaming system - comments welcome

    The one thing that I really liked about the 8800 GTS KO board is that the heatsink is huge and can really get the heat off the board and out the back of the system. I forgot to put that in my past post.
  36. A

    My new spec'd out gaming system - comments welcome

    Hey guys.. I wanted to first thank you guys for taking the time and posting your thoughts on these things. And second I wanted to list out the things that I've pulled out of the thread that I need to think about. Go with a single rail PSU Check into a Corsair PSU instead of Antec (higher...
  37. A

    My new spec'd out gaming system - comments welcome

    @Ozoneman: Yeah, I looked at that 900 case too but I read reviews that the top 200mm fan wasn't very quiet. Also people said if it breaks you can't find 200mm fans to replace it with so I decided to go with the P182 because of that review. The review is here for those who want to check it...
  38. A

    My new spec'd out gaming system - comments welcome

    @chiew: If I overclock it, is it in software or do you change the firmware and re-flash it? If it's software then I might think about this one. The reason I liked the KO one is because of the extra cooling it has on it. Plus it's overclocked already and I won't have to worry about it - and...
  39. A

    My new spec'd out gaming system - comments welcome

    Hi there.. @BenchZowner: Can you tell me why you recommend the Corsair over the Antec True Power? Same thing with the Asus board.. Why do you recommend this one over the Gigabyte one? I've read all the user reviews on Newegg and people are most satisfied with the Gigabyte one. Plus...
  40. A

    My new spec'd out gaming system - comments welcome

    Hey guys.. I'm working on putting together a new system and this is what I've got so far. I have not pulled the trigger on this so I wanted to see if anyone had any comments for me that I might want to think about before buying all of this stuff. Since I'm basing it on the Gigabyte mobo...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |