Linksys PAP2 voip 2 line unit for free (used with vonage)
includes
Linksys PAP2
power adapter
http://en.wikipedia.org/wiki/File:Linksys_PAP2_external_top_and_ports.JPG
and I'll throw in for free a AT&T 2375 Cordless 2.4Ghz phone+digital answering machine.
handset likely needs a new...
A question about expanding the home wi-fi network.
I have router X with wifi network YYY enabled and want to extend the
wireless network to far reaches of my universe/castle.
So I use cheap routers reconfigured as access-points connected
to router via ethernet...
Yes I have ethernet connectivity to the network downstairs.
Looks like I have to check the chipsets rather than just the manfacturer since I want to pair my RT-N16 with an RT-N12
Sorry all one network. wireless router is upstairs where the cable modem is, plugged into the house switch via wall jack.
I have gigabit jack downstairs and want to extend the wireless network.
was wondering if I should just buy a 2nd router - flash to dd-wrt mode and run it as a WAP and...
Home ethernet netowrk connected via Dell Powerconnect 24 in basement.
Wireless router and internet modem upstairs in the office - ASUS RT-N16 with DD-WRT - rock solid router.
I am not getting great wireless coverage downstairs but I have gigabit ethernet available.
I would think the...
I bought the ASUS RT-N16 and flashed it with DD-WRT and have not had a problem with it. My AC power has been less reliable than the router which continues to clock on.
I bought it on JackMDS recommendation many moons ago. The newer ASUS units were not out at the time. That being said...
Kevin,
My house switch is a Dell PowerConnect 2824.
I only have one port in the wall so the House Switch either goes into the router
or the office switch. Since NAS traffic is local it makes sense to plug it into the
office switch rather than router.
I guess for people to use the...
Dear Networking Guru's,
A network topology question.
I just had my house network installed and lit up with a Dell Powerconnect 24 port Gigabit Switch.
In my office in the house I have an 8 port HP Procurve Gigabit switch. The cable modem is in my office as is the wireless router.
On...
Alot of people have responded and firstly I hope you survived without any mishap, infection, complication etc.
The real problem is those charges were probably the "billed charges" by the hospital and associated departments. There is already a negotiated rate between the insurance company and...
I have an ASUS RT16N router flashed with DD-WRT
its a great router and works very well.
I have 3 devices around the house that have ethernet jacks (2 tv's and a ps3) that
I would like to connect wirelessly to the home network.
I was wondering if anyone could point me to cheap bridges/adpaters...
I appreciate everybody's responses. Very helpful!
Here is my plan
dual-wan router -> switch (for ethernet ports) <- linksys WRT54GL for wireless access
the switch allows me to get gigabit speed locally between the NAS and local workstations, and does not bottleneck WAN traffic or...
I have some absurd requirements but am hoping someone can point me in the right direction.
Currently I have a Linksys WRT54GL wireless router with 4 ethernet ports. The router has been the best wireless/wired router I have had in terms of reliability. I have multiple computers wired into the...
I am setting up a new system to replace the flagging p4 I have right now.
it will likely be an ASUS p6T, i7 920, 6Gb DDR3, OCZ Vertex 120Gb SSD
I would like to run a boot manager of sorts to run Vista64, XP Pro and
for kicks - windows 7.
I have to have XP Pro because of some propietary...
Madwand,
if I connect a Gigabit switch to the router, will traffic from PC to PC within the lan still go through the router and back or will the switch direct that (say 192.168.1.101 to 192.168.105 file xfer)
is it smart enough?
11Blade
I have had this router for a year or so and it has been rock solid but am running into some expansion headaches.
I have occupied all the ethernet ports with desktops + vonage IP adapter.
I moved my xbox(my media center) to a wireless connection with a bridge, moved the workgroup...
I had this exact problem with the stupid brain dead Nortel Contivity VPN client. After about 10 days of troubleshooting and port reassignments blah blah, the network techies said to just go buy a new router and save everyone the headache.
They all were pretty emphatic that their favorite...
applied for the card. Says I will be eligible for the $50.00 reader.
we shall see. I suspect since I was not instantly approved my credit score likely sunk me.
My trusty Corsair 2Gb Flash Voyager USB drive is slowly going caput. No matter which computers I use it on, it goes on the fritz. It now only is recognized as a usb 1.0 device and
frequently just dissappears off the desktop.
I suspect the contacts onthe usb plug or the plug itself is...
Thank you for the responses. I saw a pretty decent HP laptop with an AMD Turion X2 with only 512Mb of RAM, will I have a headache with the vista license if I upgrade myself to 2Gb?
The sales droid at Circuit City said that Vista home basic does not have everything I need to share my IP...
I have a significant investment in 5 different windows XP systems and office XP. I need to purchase another laptop and bequeath my trusty XP laptop to my wife.
Every new laptop I look at has vista home premium or basic.
For people with experience with Vista I have several questions.
1...
I'm looking to build a small form factor NAS with twin 500 or 250Gb drives in a RAID
must be low power consumption, fan less (hate noise) and be able to install a linux
variant (SAMBA box basically). So I can turn off my monster PC's which run all the time
to share drives.
Can someone...
I had a similar issue with a SN45Gv3 with a AMD FX-55 and a XFX card
and also a ATI Radeon 9600Pro AGP card.
spent the better half of the day trying to figure it out. Remember there are no beeps
telling you if it posts or not.
Eventually I pulled everything out, unplugged the drives...
I am hoping someone can help with a difficult problem.
I am independent contractor working from home and currently have 3 different clients, and adding a 4th client all who require access to their individual networks and systems.
I use a single PC with a dual 20 LCD monitor and 2 Dell 15"...
I'm praying for a big discount coming on the 2405FPW
Although, given the amount of people watching for the 'supposed' big october
end-of-fiscal year clean-out, it will be my luck this doesn't happen
some very excellent info. the link was something to be envied.
mashie's sff, http://www.mashie.org/casemods/udat1.html
All the info has been very useful.
I am considering a ViA board. Since I will be networking the storage, someone mentioned I may see some performance gain by getting a gigabit switch for my PC's and network drive
and bridging to a wireless router for the home network.
Any opinions? Do any SFF boards have onboard RAID?
I posted this question a short while ago and the responses were very helpful. Unfortunately the cheap solution was exactly that.. cheap and slow.
My current home setup is a based around a Linksys Wireless-G 4 port router.
I have 2 P4-3Ghz workstations for imaging work, a P4 desktop for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.