Search results

  1. J

    Extremely slow wireless transfer speeds

    While this is a 802.11N device, it has a CPU in it that is about as fast as a WRT-54G and ram to match. The Surf in its name implies that it is made for very basic Surfing the web not heavy traffic. I am not familiar with the WN2000RPT, but it could also have this problem as a lot of budget...
  2. J

    Motorola SurfBoard modem w/ Cisco E3000

    What model SurfBoard is it? they are a lot of them out there.
  3. J

    Any Network Admins that use SolarWinds as monitoring software?

    I personally use Scrutinizer v9 for monitoring my network. I've tried out SolarWinds and I feel like I get more in depth reports from Scrutinizer. It is the best tool on the market for NetFlow and they also offer a free version for up to 5 NetFlow exporting devices...
  4. J

    My new project

    You mean cpu? yes, i think all p2's can. 8/16x200 if you want to donate them ill run every benchmark under the sun for you... also i would probably want 2 4870 x2s, i have x-fire. lol
  5. J

    My new project

    http://valid.canardpc.com/show_oc.php?id=562079 100mhz tricore for windows 7? lol i have way too much time on my hands.
  6. J

    My new project

    well just a little up date, after some added cooling to my mosfets and removing 4gb of ram ive gotten 3.8ghz stabble with 1.45v (1.44 after drop). it was up and running at 1.425 for a while but i fugured the .025 but was worth it to avoid any problems down the line. im getting 43C full load 30C...
  7. J

    My new project

    after swapping psus, and running a crap ton of test and researching(mostly on my motherbord) ive determined than the mosfets(that dont have heatsinks) cant take the stress. ill be getting some to slap on there soon, i found a lot of other people with this board running into problems with the...
  8. J

    My new project

    Im using a sythe kama angle cooler. I ment to say 50C(no sleep), I normaly hover around 44C under load. ive seen it spike to around 48 at times. cpu-z is reporting my vcore .25V lower after an hour of idling. it could be why i had to lower my opteron 165 from 2.7ghz to 2.4ghz near the end of...
  9. J

    My new project

    im starting to think my psu is giving out, im no longer stable at anything over 3.4ghz at any voltage, but if i leave the computer off for 30 min then turn it back on its stable for like 30 min then its back to failing everything. temps never even hit 40c so i know its not that. im running a...
  10. J

    My new project

    http://valid.canardpc.com/show_oc.php?id=530738 Unfortunatly the 4th core is dead but its showing a lot of overclocking potental. its at 3.7ghz right now at 1.425v, Prime stable. Im having a small problem though, before I started tweaking with nb/ht/memory/ and some other settings at was...
  11. J

    Best budget GPU for F@H?

    The 8800gs/9600gso will be faster crunchers out of the 2. Memory dosnt matter at all on gpu2 from what ive seen. I would go for the 8800gt my self. My 8800gts 512 is chugging along nicely ^_^ . I would back up these claims but jimmy is way too tired and is going to bed.
  12. J

    Looking for oppinions on 8800gt

    As far as games go yes, but a 4850 is a lot slower as far as folding goes.
  13. J

    Looking for oppinions on 8800gt

    The only thing that stinks is im going to have to remove 1 of my 4 hard drives to fit it in. lol That and im starting to look like a fan boy, i run all EVGA now.
  14. J

    Looking for oppinions on 8800gt

    well thanks for the push, my friend heard i was looking for a card and recently upgraded to a gtx260 so he is now selling me his evga 8800gts 512 for $85.
  15. J

    Max video card for m2n-sli deluxe mobo ?

    no it will not run xfire.
  16. J

    Max video card for m2n-sli deluxe mobo ?

    Actually he would run it as 2 cards not SLI. Remember he is running dual monitor.
  17. J

    Max video card for m2n-sli deluxe mobo ?

    Any pci-e video card... your power supply is more of a limiting factor here. as always you have a lot of options, you could just go for a gtx260/280 card, or even a 2ed 9600gt. on the ATI side you have the 4850 and 4870 depending on how much you want to spend.
  18. J

    Looking for oppinions on 8800gt

    I was going to pick up a 8800gt tonight (mostly for folding, but also games) but ive read a lot about defective g84/86/92/94 parts. Should i be jumping on the AMD boat or is this nothing to worry about?
  19. J

    Need knowledgable input on swap file, 2 drives.

    as i remember the 1.5 times the ram idea was the recommended back when people were running like 32 to 128mb of ram. the idea is to get the stuff off the swap and into ram. i think as small as 512 is enough unless your doing video editing or something that use a crap load of memory like that. i...
  20. J

    CCENT and CCNA

    extreme and foundry both got there name known from there cutting edge networking equipment. i havnt used products from ether company yet but im willing to bet there standard switches are no better than a good(and i stress that) cheap brand. juniper i don't mind ya they cost more than other...
  21. J

    CCENT and CCNA

    ouch 3000 really? ccna1 was free for me(high school) and ccna2 is about $500 for the whole thing at my local community collage. what i thought was funny was the end of ccna1 where you had to spec a network and one of the things they asked was to do it cheap, i believe it was part of your...
  22. J

    Post your fried CPU stories!

    athlon xp 1700+ tbread-b oced to 2.7ghz 2vcore with a volcano 12. fried after benchmarks. we got the cpu for free at my school and i had just upgraded to a opteron 165 so we decided to have some fun with it. hehehe there was a bit of smoke that day, i think we ended up removing the heat sink...
  23. J

    165 problem

    i would just tack each side with a dab so it would be easy to remover if i had to. thanks for the tip.
  24. J

    165 problem

    first its a CCBBE 0616 XPMW i maxed it out at 2.8ghz with the 2ed core disabled (luckily the hot core is 1 not 0 so i can disable it in the bios) with maybe 1.375vcor, i might have bumped it to 1.4 but i dont remember. so voltage isnt an issue. right now i have it running at 2.2ghz with a...
  25. J

    Cable internet/Wireless Network/Dial-up Speed

    well those are actually normal speeds for a network like that. i mean the only way you would see better results are with better antennas or with high power devices at both ends. i myself am running a directional 1.5 watt (after antenna) system at a rang of 3000ft through 1 wall, at a full...
  26. J

    165 problem

    ive had this sucker for a while and its always had this problem but now its starting to piss me off. there is a 10 to 20C dif between cores. i have reseated the hsf many times, its making good contact it has to be a problem under the ihs. removal is not an option because im running a clip on...
  27. J

    Looking for perfect match for my 6800GT AGP

    well AM2 is out, as it is ddr2 only. 939 only had a couple good boards with full speed agp (most boards with agp now are crippled and dont preform well). you might be able to get a asrock 939 dual sata or dual vsta, they had good agp support.
  28. J

    Hide your IP with torrents?

    well you could spoof your ip... but that defeats the idea of torrenting because its a very one way connection.
  29. J

    Kings Gauntlet 2007 is a 2 week international SETI race

    jswjimmy #883377 just started running seti after a year of inactivity :)
  30. J

    Cannot find any wireless networks

    if they were the same chip set the bad drivers from the broadcom based 1450 could stop the new adapter from working properly. ive had a problem like this with my 2 atheros based cards.
  31. J

    Why are Maxtor hard drives so loud?

    ive had 2 loud maxtors, and one was a relabeled quantum fireball, the other was a rather bulky 40gb drive that clicked and vibrated, the drive only lasted maybe a year in a half. right now i have 2 160gb maxtors, a 80gb, and a 120gb in use and there all quiet. i was a big fan of the diamond max...
  32. J

    how to use 3 IDE HDDs with 1 cable?

    thinking way back i remember seeing a old computer (had a 386 or a 486 in it) that had a ide floppy drive on a cable with 2 hard drives. my guess is it was a proprietary controller. i wish i keeped the system for a time like this lol.
  33. J

    Cannot find any wireless networks

    before you try anything crazy reinstall the drivers.
  34. J

    dead mobo or cpu?

    my friend dropped off his computer for me to fix the other day. he just got done putting it together and could not get it to work. i disassembled the whole thing, put it back together and it still has the same problem. today i called him and he admitted that he tried starting it without a heat...
  35. J

    OCing CPUs

    my old athlon xp 1800+ lasted about 3 years at 2.4ghz before i retired it to server work (now at stock speed 1.53ghz but with a 1.1 vcore) and the chip once booted at 2.6ghz, was stable at 2.5ghz. all on air cooling. right now i have a opteron 165 running at 2.7ghz stock vcore and i dont expect...
  36. J

    how well did the TCCB overclock

    nope they are TCCB, they suck at anything over ddr400 they were very rare from what i hear, they were only used in oem samsung 2.5-3-3-8, corsair 2-2-2-5, and ocz 2-2-2-5. both the ocz and corsair sticks have heatspreaders on them so you could not see the chip, thats another reason no one realy...
  37. J

    how well did the TCCB overclock

    i doubt they will do much. ive only tested one and they have an inability to do cas 3 on my current mobo. they will only work at cas 2 or 2.5 stable at both at ddr400 though. im getting a asrock 939vsta for xmas ill be able to max them out then.
  38. J

    how well did the TCCB overclock

    i got my hands on 2 sticks from a friend ive seen very little information on it. just about the only things ive seen on the net were 2-2-2-5 at 200 and i saw a post somewhere with some one running them at 2.5-3-3-8 at 220 any one here have any experience with the TCCB?
  39. J

    CPU Upgrade (s939) question

    its $155 on newegg, and a lot of people are getting over 2.6ghz with default vcore, some even clamming higher. im ordering one later today. :D
  40. J

    CPU Upgrade (s939) question

    the opteron 165 is, 1 cheaper, 2 has the 2x1 mb cache, and 3 will overclock very well 4 do they even make the x2 3800 for 939 now
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |