I contacted Enet, and the sales guy stated that they are shipping cards with the L configuration. I took the plunge and ordered it. Will post with details when it comes.
Just wrote connect3d, this is what i got.
Michael,
Our cards are not in the L configuration. Hopefully this helps you out!!
Sales at Connect 3D
----- Original Message -----
From: Michael Pham
To: sales@connect3d-us.com
Sent: Thursday, September 11, 2003 1:25 PM
Subject: 9500 Non Pro cards...
Friend of mine wanted to upgrade his video card he is currently running TNT2 Vanta on Win2k. He ended up purchasing a MSI 8855 Geforce 2 TI. After installation we found the card would lock up on the desktop or openGL. I made sure that he had all his updates and got the latest 4in1's from Via...
i bought the retail version of the home edition, but never bothered to opened it. i use "beta & cracked" version because i change hardware out of my system a few times each week.
First time it happened, it was earlier in the morning so I thought I was possibly was sleepwalking or something and just blew it off. Then yesterday I get ready for bed turn off my comp, five mins later turns on again. Any thoughts?
it's not motherboard dependent for one. ide bus is the same from mobo to mobo. i have teh 60gxp 60gig and i've ran it at 41 with no problems. currently running at 155, about 38 for the hd with no problems
I have a certain serial server device that communicates on port 4660. I open port udp & tcp port 4660 and forward them to the Serial Server's ip, communication works fine. What I want to know is when the client software from a remote location wants to access the Serial Server thru the router...
Just wanted to brag. Got the voltage mod for the Ak31a to run at a true 1.85 (acually a bit higher, 1.875) and successfully unlocked the cpu. Can't get the dang thing to run stable past 1633 but was able to post at 11x155 (1700), but would not make it into windows no matter what voltage (2.0)...
well i got my cpu successfully unlocked, but it was hard. the copper tape itself didn't work to well, because the adhessive end is not conductive so i taped it on to a piece of clear packing tape, there I place the trace tape i made over the L1 bridges as close as I could get them. Then I took...
Go pick up some copper back adhessive tape (can be picked up at most electronics stores bout 10 bux for a few feet), some clear packing tape and a pair of scissors. Get a piece of paper and mark the distance between the L1 bridges. Cut some thin pieces of the copper back adhessive tape. Lay...
Since your hard disk is one of the biggest bottlenecks of your computer will enabling compression speed things up at all? I understand that it will use more cpu cycles, but if you got like a 2 gig comp will it really matter?
I got a network cable running across a building, it's a bit short. I don't want to run a whole new cable and was thinking using some couplers to extend the length of the cable, is this a good idea? or will there be degradation and loss of performance?
Don't know if this is possible, but I'm trying to get like 20 computers on DHCP with 1 ip and 4 others comps with their own ips, but all still able to communicate within the lan. The DSL Modem is a modem router combo with a built in 4 port hub, made my Caymen. Anyone Anyone
i know boards like the msi k7t turbo the thermal diode sits closer to the cpu than other boards like the iwill kk266. when running the k7t temps would hang around 59C, the same cpu in kk266 would idle around 42. is it probe movable on that board.
I gave up with the latest 12.41 WHQL drivers and went back to the 6.50 to overclock w/ coolbits. Still burning it in, but it's been running 3dMark 2k1 for the last eight hours without a crash a 245/485. Who needs an ultra? I have the MSI Starforce 831, NO RAM SINKS!!
I can get this puppy running at 13*116 (1508) but can't even get it to boot at any mulitplier with the 133 fsb option. I've posted at 600 (6*100) so i know that the mulitplier is unlocked, but right when i pull the jumper to switch it to 133 fsb operation the computer doesn't post. I've tried...
it's for work, we have some proprietary software i need to validate for each os. we need them to keep em around in case other problems arise and we need to reproduce problems that customers are having.
so far i have 98, 2k, nt, linux, an d 95 install. anytime i try to get me going it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.