the jumpers are correct for sure. i mentioned that it does work together sometimes but rarely. i have a nForce3 250GB board that should let me use Ultra DMA 6 - Ultra133 but this secondary channel is locked to only Ultra DMA 2 - Ultra33. i think my onboard IDE controller is bad.
Got a Maxtor and Seagate HD on secondary ide master and slave. With both drives on they both fail to detect, windows gets a lil strange with really long shutdown times. Once in a while they work together but after shutting down they wont work again. If i only have one of the two drives on it...
Creative Sound Blaster X-Fi Platinum $72.99 AR @ Amazon
$172.99 - $10.00Rebate = $162.99 wrong?
$172.99 - $100.00Rebate = $72.99
link keeps giving me ref so just search it
funboy42s first post a while ago got me switched to these and ill never use any other. might have to pick up another since these are starting to wear out.
My headphones went out so i found the splice and want to solder it. The wires are tiny twisted strands that has color coating that solder wont stick to. Is there a easy way to remove the coating? i usually use sand paper but these wires just get torn apart before getting most of the coating off.
Anyone know how to get the signal to a TV? I have a line coming in the house straight to the cable modem. Can i buy a Y split and put it to both the modem and TV? or VRC? Do i need a filter or buy a cable box?
The image was just a backup incase something happened thats all and it proved to be of great value since it has an original copy of the MFT. The bad HD had its MFT edited since i went ahead and let windows do whatever it can about the bad sectors. All i wanted was a list of files that were in...
I made an image of the drive onto another HD from starting to ending sectors. Then i went ahead and let windows try to repair the drive with chkdsk etc and so it found the MFT is corrupt and starts deleting files and recovering files into unkown directories. This is why i know the MFT has the...
Well, i made an image of the drive before i started anything. Ill have to look up more about the MFT. I know its there since windows tries to fix it and i saw it delete tons of entries that were corrupt in auto chkdsk B4 windows starts.
UPDATE: I extracted the MFT data from the image and now...
My HD failed and i lost about 10% of the files after recovery. Is there a list of files in a HD stored somewhere? Indexing service or something perhapse, since if i view the HD properties it still shows the full amount of space that was originally there.
I didnt know how to put it because i dont know exactly what im supposed to do. I have to construct some simple circuit. Vin to resistor to switch( to IC/to ground) then the Output of IC to LED to resistor to Vin. I was wondering how i would find the correct resistors to use. I dont see the...
Yup thats it. But unfortunately i dont know what those are yet. If im making a circuit or whatever with an AND gate to make a simple binary with LEDs. I dont need to account for the schematics as long as i know the inputs and outputs from the IC?
Could someone tell me what the following are on the first gate 7400?
1. Theres nodes where multiple branches meet and its a bar instead of a dot. Theres also usually a small arrow on one of the branches following the bar looking node.
2. In some schematics the bar is curled on the ends like...
I tried doing that but i have no clue what to do with the current controlled current source. I tried solving it again for the 1000th time and still no luck getting an answer. Does anyone know the answer and can show how they did it? Im checking my answer with pspice but never close yet.
If you label the top 3 nodes left-right 1,2,3 i got:
(V1-90)/15k + V1/10k + (V1-V2)/4K = 0
(V2-V1)/4k + V2/40k + (V2-V3)/5K - 19ix = 0
V3/89K + (V3-V2)/5K + 19ix = 0
these are currents leaving the node = 0
ix = (V1-V2)/4k
Substitute and solve for V3 which is the Vth
^ i dont know if i...
i got the top 3 nodes made currents going away from them = 0. so theres 3 equations and ix is the voltage drop on the 4k resistor divided by the resistor so i can substitute all those into each other and find the voltage at A which is the thevenin equivalent correct?
Ive been trying to do some problems for the past 6 hours and got only 2 done and they are so simple but i just cant figure them out. Its been a while since ive taking this class so im in a bit of trouble. I could try to email or AIM the circuit pix. I dont need them solved but want to know what...
Anyone know any places online to look at to help with programming C++ .Net? Im mostly stuck on pointers, references, and arrays. If anyones willing to help me understand some examples in book by deitel that will be great.
Thats true in most cases but i have a very picky drive that so far rejected almost 10 different CDs. Only one itll actually read in most cases was my memorex Taio Yuden... which is very old and i only have 2 left.
Sorry i should have been more clear. Im looking for a number or something to know the length of a persons attention span even if its general. I saw one saying 3-5 mins per age but cant find anything about that anywhere else.
Could someone help me find anything about attention span as in length or studies. Or a place to look or if you know if one has been done or a site with a source. anything! I keep ending up with either ADD or "increase attention span" ads.
Not sure if this is still the same but fuji MIJ were Taiyo Yuden (Japan) which is first class media. MIT were either cmc or other thats not first class media. Hope that helps
DVD+R
DVD-R
50pk 16x Printable DVD+/-R Memorex $14.99 @ Compusa In-Store Only
Can check store inv online.
DVD+R RICOHJPN 03 was media ID from last deal $18 2 months ago.
I have an Asus K8N-E deluxe Nforce 3 250gb board that works fine except the gb NIC. I was on the computer and it suddenly stopped working. Ive tried disabling/enabling it in both windows and bios with new driver installs. When i plug in the cable it lights up red but i think thats because my...
Since my printer and scanner are next to each other, i didnt notice i was using my printer plug for my scanner. The printers plug is 30V @ 500mA vs scanners which is 12V @ 1.25A if that matters. How likely would it be repairable? After opening it, theres 1 warped resistor but rest seem fine. No...
I laminated a piece of paper and someone folded it... Now theres a line and its folded so i want to relaminate it. I tried splitting it but its stuck to both sides and will rip, anyone know of a way to remove it?
Yes ive tried, unless theres something other then chipset drivers from nvidia. Im thinking if I should just use the NIC that i installed but its very old and not Gb for lan. Im actually looking for a fix over the 2 NICs but if theres no fix a simple way of switching between the 2 would also work...
Problem:
It seems like my onboard NIC is being neglected resources. When i play a game, while the map loads like any other 3d mmorpg theres no loading screen, the landscape just continues. During this split second i get a jerk sometimes and thats exactly when i disconnect or loose control of my...
Theres a big gap on the left side of the TV which changes depending on resolution of the video. If its a widescreen format, itll cut off the left and right and stretch it out on the top and bottom. If its not widescreen itll display everything but its moved over to the right. Adjustment controls...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.