I also have thunderbolt and experienced a very weird issue with it not connecting to any networks except 1x. They were quick and helpful on the phone, and when they couldn't figure it out they sent me a new SIM card and phone overnight. The "new" phone had a messed up internal speaker that...
I have a VZ business account, and in speaking with my local reps they told me that the 3G data plan and the 4G data plan have different product codes and that if I wanted unlimited 4G the only way I could lock it in was with a 4G account (they said when 3G is upgraded to 4G it is a switch to a...
Ok, well I am back up at 4.5 with 1.34V set for the CPU. Here are my results, so I think I am stable, but the question is, should I try and back the voltage down from 1.34v or is that a safe voltage for long term use?
As always, thanks for all the help and advice.
Ok, so the processor can take up to 1.52V without adverse effect? Where did the 1.35V-1.38V number come from?
Thank you for the info, I will do some searches and see if I can find more on the voltage maxes cause there is quite a difference between those numbers.
But everything else looks...
Ok, so it has been a very busy few weeks, but I finally got around to trying to overclock my CPU a little more, and I am running into problems and need some help.
So, first a recap of my system:
CPU: Intel i5 2500k
MB: MSI P67A-C45
HeatSink: Cooler Master Hyper...
Hey Tweak,
I am afraid I don't understand the question. I don't know what you mean by "full contact" and "lapped CPU".
If by full contact you mean the Heatsink on my cooler is fully touching the CPU, then to the best of my knowledge it is. But if it means something else, then please...
Thanks so much for the answers and advice.
So first off, yes I am overclocking in the Bios not with that utility. (and if all it does is just read the info on the chips, then I think I will just uninstall it and use CPU-Z, GPU-Z and RealTemp.
I briefly tried going to 4.5, and 4.4 last...
Ok, so I have now OCed my computer manually, and here are the two pics of my system running under Prim95 (the second pic shows CPU-Zs Memory info:
My one remaining question right now is, why does MSI's Control Center show my ram as 1333 when I have it set in bios as 1600 and when CPU-Z seems...
Thanks for the info Snoopy. I used the vertical line method for the thermal paste as that is what the Arctic Cooler guide said to use for our chips and what a few other members here recommended.
As far as the OCing goes, I am beginning to realize that I should probably just follow that guide...
Trident VESA
Diamond Monster 3D
Diamond Monster 3D II
Creative GeForce 256
GeForce 4 Ti 4200
GeForce FX 5200 (What a crap card)
Radeon 9800 Pro 256MB
GeForce 8800GT 512MB
Radeon HD 6950 2GB
Hello all,
A couple of questions from a newb that despite a few searches I could not find answered. I apologize if these questions are common and I just missed them.
Preface:
I recently built a new computer. This system is as follows:
CPU: Intel i5 2500k
MB: MSI P67A-G45...
Just wanted to throw out there that the Antec 300 case works great for the 6950.
I just built a new computer with the exact same CPU/GPU and the 6950 fits fine into the case.
It will extend into the HD bay slightly, but since the Antec 300 has a very long HD bay area, you should have no...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.