Search results

  1. V

    AMD64

    [b]I know that actually with my NF2 and Barton I'm better with lower latencies, but what about with coming A64 AMDs?[b] Opertons are 25% faster than Barton with the same GHz..... :D :beer:
  2. V

    how to enable dma for hard drives in windows server 2003

    I am trying to enable dma for both my hard drives in windows server 2003 You dont say what board you are using and since I dont know the chipset I cant be more specific about what buttons to push. There are 2 places that need the change for this to take place. 1)-Basically, to enable the DMA...
  3. V

    OK, i've run out of ideas. Ran NAV, Ran Adaware, Ran BOTH in Safe mode, still something is screwy.

    I think you need to suck it up and format :-/ Re-format it.. :D
  4. V

    java with XPpro

    "It isn't a matter of personal preference, the Sun JVM runs circles around the MS JVM in features, compatibility, and most importantly, the area of running correctly. " Sun just so happens to own and develope Java and everyone uses it on the internet. Not just with windows but every other...
  5. V

    I need to re-install winxp question regarding not wanting to overwrite current files and folders on C: drive...

    I tried that but during the repair installation with 13 minutes to go I get an error message about a file called msdart.dll and I can't get rid of it and can go no further. I dont know what msdart.dll is and it doesnt seem important enough to wanna find out what its for. Actually, when booting...
  6. V

    Best linux distro for a newbie that's not Lindows

    I swear i'm about ready to delete the partitions i created for linux, DOS wasn't this hard to learn from scratch. With Mandrake you purchase whats called the Discovery Pack that helps you threw all that....... :D
  7. V

    Best linux distro for a newbie that's not Lindows

    hi all, so i downloaded rh 9 and i caused me sever grief. Being a complete linux newbie it took me ages to get anything to work, plus i'm running it on an nforce 2 board so i couldn't get the net access going. So, new iso's to download ? I heard mandrake or suse are good. Also, good newbies...
  8. V

    any way to "gut" windows XP?

    xp blows? why do i keep hearing this.....lol.....it's only a .1 revision over 2000 Its more than that. Its the 2000 kernel and 98 / ME kernel combined for security plus performance to for a start........ :D
  9. V

    any way to "gut" windows XP?

    Buy a bigger hard drive and forget about it Much of the crap that is mentioned here about XP can easily be turned off at Computer Management.......... :D
  10. V

    any way to "gut" windows XP?

    like take out the bloat of it, uninstall the helps, utilities that i will never use and crap, any possible way to do this? Yes, as it was stated by joemonkey, XPlite is just that program but it was written for an enhancement for Win2000 users.......... :D
  11. V

    java with XPpro

    Anyway I know nothing about Java so any insight into this would help. The Java site has a lot of different downloads,J2EE 1.4,J2SE 1.4.2 etc.....What does he need for webpage editing-besides Java VM Its not new about the war between Bill Gates and Sun (who owns Java) that Java has been taken...
  12. V

    Will Server 2003 run on Athlon 64?

    Just a quick question as I'm not having any luck getting that OS to install on my Athlon 64 system. Just an FYI Ive heard and read many many posts about the Athlon 64s having issues booting with memory slower than what is recomended. DDR400(3200) is what is recommended so that might very well...
  13. V

    I see we have ACPI Experts Here, Pls help

    Better tell nVidia to stop making their nForce2/3 UNIFIED DRIVER Win98x/ME compatible then. | :>] ) You turn off ACPI before you install the windows in the bios section............ :)
  14. V

    How do you clear the Windows Error Reporting list in System Information?

    In System Information under software environment it lists every error since XP was installed. Can I clear that list somehow and is there any harm in doing so? The list can be cleared in Computer Management for: System Tools / Event Viewer / Application and System locations can be...
  15. V

    Thorton vs. Thoroughbred

    They're both 266FSB and pretty much same spec Thorton is a 333FSB with a CPU Core Size of 20% bigger than Tbred. It has the same .13u L2=256KB and its considered a Barton grade processor. The Tbred is a 266FSB Thoroughbred B and has an extra layer of copper interconnects to reduce interferance...
  16. V

    Advice on OCing AMD Athlon XP Tbred 2100+ with 8RDA+

    I have a Tbred 2100 on an Abit NF7-2 and I can tell you the 2100 will overclock well beyond its default. Yes its a 266 chip and I run it over 400 Dual Channel very easy (10.5 x 238 is my best) with a few changes. Like it was mentioned before that a chip does get hot at the upper edge and a very...
  17. V

    I see we have ACPI Experts Here, Pls help

    ACPI is used in WinXP. NF7-2 chipset is for Win2000 and WinXP use only...... :D
  18. V

    Cured my XP slow boots

    Heres a few beers.................. :D:beer::beer::beer::beer::beer::beer: a sixpack !
  19. V

    3 sticks...dual channel

    Maybe we can drag an official nVidia rep in here to answer this long-debated question samuraisquirrel is from NFORCE TEAM and he did write the accepted definition shown here ............. :D:beer:
  20. V

    3 sticks...dual channel

    ;samuraisquirrel wrote: "All dual channel nforce2 MBs i've used had this same configuration,,, 1. channel = slot 1 and slot 2 2. channel = slot 3 must have a dimm in each channel to enable dual channel. It is my understanding, if you populate the slots so the channels are balanced (eg...
  21. V

    3 sticks...dual channel

  22. V

    3 sticks...dual channel

  23. V

    3 sticks...dual channel

  24. V

    3 sticks...dual channel

  25. V

    Do you give a rats ass about Prime95?

    P95 isn't the end-all-be-all of testing programs. It's nice because it gives you a report on how long it ran and it loads the CPU AND memory heavily (take a look at the memory usage!) Memtest is more comprehensive............. :D:beer:
  26. V

    3 sticks...dual channel

    I don't think that it is required that you balance the ram between the channels for it all to be in dual channel mode, accessing at 128-bits. What it requires is that the total of channel A equals Channel B for Dual Channel operation. If this requirement isnt met then it is the balance of the...
  27. V

    3 sticks...dual channel

    thought i read somewhere that if you use 3 slots, slots 1 and 2 combine into a single channel while the 3rd slot becomes the 2nd channel keeping the dual channel enforced .....i guess this is what i need to know for sure. Slots 1 & 2 is channel A and slot 3 is channel B. So for 2 sticks slots 1...
  28. V

    440fsb amd

    Are you retarded or just stupid? All you showed with that "benchmark" was that you have no idea what you're talking about or what you're doing. It doesnt look like you understand what the benchmark is saying here not I............. :D:beer:
  29. V

    440fsb amd

    Are you retarded or just stupid? All you showed with that "benchmark" was that you have no idea what you're talking about or what you're doing -With my benchmark I showed you what I was talking about, when it comes to using multis and FSB combos with NFS-2, as there is a wall with this chipset...
  30. V

    440fsb amd

    Yes it is, especially since Valky's ramblings are horribly unorganized and pointless. Also since he proved himself wrong with his own example Sorry if you didnt understand me the first time. I had to show you this bench so you could understand what I was saying a little more but not saying you...
  31. V

    440fsb amd

    Benchmarks using SuperPi - 1M XP2100+ default - 1733MHz(13x133) = 62s 1754MHz (10.5x166) = 58s ------------------------ 1837MHz (11x166) - 56s 1704MHz (8.5x200) = 56s - 400FSB v. 333 FSB = +133MHz ------------------------ 1921MHz (11.5x166) - 55s ------------------------ 2005MHz (12x166) -...
  32. V

    AMD experts what can you tell me about this stepping?

    try this this little tool............. Text :beer:
  33. V

    440fsb amd

    Use Google, read up a bit and come back when you get some real info to help others with. Of just relax a little and quit digging a hole. Take some time to read the multitude of posts here and get a feel for what is going on Ummm.......... I dont see anything new in this discussion as its...
  34. V

    nForce2 200MHz FSB and RAM Probs.

    Since you lose a lot of performance running the RAM and FSB at async speeds it is just not worth it to run the FSB and RAM out of sync with one another on my nForce2 board. If you are running Ram at single channel, you want tight timings, 2-2-2-6 but when you run double channel you need to...
  35. V

    440fsb amd

    Then finally he's laboring under the delusion that the owner is cranking all these speeds up and not using it to it's full potential, so the extra speed is useless, It doesnt matter what CPU we are talking about here because it is universal to say(with AMD) that they can be OC'd and with great...
  36. V

    440fsb amd

    gameing and media encoding have been a priority for me lately. i would say i have a good vcard (nvidia 5200fx) but by far not the best. since gameing also heavily taxes system ram i thought the extra bandwidth would help. (looks and feels smoother) I think your brother is talking about the...
  37. V

    440fsb amd

    He's under the impression there is not only the lack of a PCI/AGP lock on the board That lock is adjustable on my Abit but I dont know about yours if you are refering to the Ram .... :D
  38. V

    440fsb amd

    that it was fruitless to reach for this high of a bus because the nforce2 controller will only hit 400 therefore i am only stressing my hole board for no reason. ....is this true? I think ur brother was talking about OC'n the Ram at over 400 fsb even though the CPU can do it. Everyone knows...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |