Search results

N
Logitech MX1000 laser mouse review

Actually the MX1000 is much much better than my old mouse. Now when I play Far Cry, my shooting is so much better without the lag. I used to get a lot of lag with my old mouse. Works better than I actually expected it to!
- neokenzo
- Post #51
- Oct 30, 2004
- Forum: Computer Building
N
Logitech MX1000 laser mouse review

I got this mouse 3 days ago. All I can say this mouse is awesome. I dont have any complaints with it. My previous mouse was Microsoft optical wireless which lags especially in games. I used this mouse in fps games and its a much improvement from my previous mouse. No lag at all. Instant...
- neokenzo
- Post #45
- Oct 28, 2004
- Forum: Computer Building
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

This board hasnt given me any problem since I set up RAID on Promise. Works like a charm. I'm sorry to hear about all the problems but I think its just fiding the sweet spot. Once you get that right, everything else will go smoothly. Only drawback so far is that it doesnt overclock well. I only...
- neokenzo
- Post #341
- May 5, 2004
- Forum: Motherboards
N
Imaging RAID0

Thanks for the info. Basically I disable my mobo's LAN when I installed my RAID0 via Promise because at the time I did not think I would need to use it. Now I do and when I go into the BIOS and enable my LAN and reboots again, it would say no hard drive found. If I disable the LAN again then it...
- neokenzo
- Post #3
- Apr 17, 2004
- Forum: Computer Building
N
Imaging RAID0

Basically I want to destroy my RAID0 array as I want to install a new hardware. Everytime I turn my LAN enable, my hdd is not detected. So the only way I can think of is imaging my hdd, enable my LAN, re-do my array and re load my image. The question is, has anyone tried this? I mean imaging...
- neokenzo
- Thread
- Apr 17, 2004
- Replies: 3
- Forum: Computer Building
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

Nope its at Standard Performance Mode. I am overclocking the rig a bit but I still cant understand why its coming up as 1:1 when BIOS says its 2:1.
- neokenzo
- Post #257
- Mar 30, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

Okay I am having problems with my memory again. I have set 2:1 DDR400 in BIOS but when I open CPU-Z its onl showing 225Mhz at 1:1. Is this because I am overclocking?
- neokenzo
- Post #252
- Mar 30, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

So far I had not had any problems with the RAID array apart when I tried overclocking it too much. I have since broke my RAID array. As for the memory, I think the board is a bit crazy. Originally I had my memory at slot 2 & 3 but it was running at DDR200. When I tried to change the slots from...
- neokenzo
- Post #244
- Mar 25, 2004
- Forum: Motherboards
N
RAID0 broken array

I proably know the answer to this question but I am hoping that I am wrong. I was trying to overclock my system, well I sort of pushed it a tad bit too much and when the system rebooted I got BSOD. When I restart my pc, my RAID array is broken. The only option that I have is destroy the array...
- neokenzo
- Thread
- Mar 23, 2004
- Replies: 1
- Forum: Computer Building
N
Do I need bridging for wireless?

Well I connect to the internet using DSL. I am not sure what Local Area Network means but when I was setting up my router, I used wired and I think that was what set up the Local Area Network. Then I set up my wireless connection and I had to bridge the two to use my router/internet. The thing...
- neokenzo
- Post #5
- Mar 22, 2004
- Forum: Networking
N
Has anyone overclocked using K8V deluxe?

I'm thinking about overclocking my rig. After reading up on it, it seemd that the K8V has no pci/agp lock which might cause a problem. Also, on a few incedent, it destroyed the RAID array. My CPU is A64 3200 and from what I gather, the max I can o'c would be 2200Mhz. Is the 200Mhz difference...
- neokenzo
- Thread
- Mar 22, 2004
- Replies: 0
- Forum: CPUs and Overclocking
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I changed my memory slot from slot 3 to slot 1 and it works :D My memory is running now at 410Mhz :) Funny though it wont work when changed slot 2 to slot 1 but doesnt matter as long as its working now :)
- neokenzo
- Post #232
- Mar 21, 2004
- Forum: Motherboards
N
Do I need bridging for wireless?

Yes. Well I plan to connect my Xbox and PS2 by wire later but at the moment its just wireless only.
- neokenzo
- Post #3
- Mar 21, 2004
- Forum: Networking
N
Memory & RAID

I have RAID0 on my rig. The other day I tried swapping my memory slots and the array was broken. Is this normal? Is there a way I can save my RAID should I decide to swap my memory?
- neokenzo
- Thread
- Mar 21, 2004
- Replies: 1
- Forum: Computer Building
N
Do I need bridging for wireless?

I got a Netgear DG834G wireless router and Asus Wifi card. I have it connect and running okay but the only way I got it to connect is by bridging my Wireless Network Connection with Local Area Connection. Is the bridging neccessary? Cant I just connect without bridging?
- neokenzo
- Thread
- Mar 21, 2004
- Replies: 5
- Forum: Networking
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

Thing is I cant afford to have it formatted. Damn, shouldnt have set it on RAID.
- neokenzo
- Post #231
- Mar 21, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I just found out from OCZ's website that in order to run DDR400, the memory must be in slot 1 &2 or SLot 1 & 3. No wonder it cant work. Now I must find a way to change my memory slot without losing my RAID array. Any suggestions?
- neokenzo
- Post #229
- Mar 20, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

XRDirtHead, Yeah, tell me about it. I know setting up RAID was kinda risky and I wont be able to change my hardware, but I didnt know that I wouldnt be able to change the memory slots either. I'll try it again later but kinda scared incase something goes wrong and I lose my array permanently!
- neokenzo
- Post #228
- Mar 20, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I actually tried changing one of my memory slot from DIMM2 to DIMM1. As soon as I start my machine it says that my RAID array is broken and wont allow windows to boot. I tried everything but nothing works. Then I moved the memory back to its original slot and everything was okay again. Did I do...
- neokenzo
- Post #225
- Mar 20, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

Algere: It reads 100Mhz DDR which equals to 200Mhz on BIOS default setting. I will try clearing CMOS and post the results here. I have 2 x 512MB EL PC3200 Platinum Limited Edition OCZ. I have them installed on DIMM 2 and DIMM 3 slots. I cant change them because my hdd are set on RAID0.
- neokenzo
- Post #222
- Mar 20, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

1. My CPU reads at 2050Mhz as the HTT reads at 205Mhz. This was set on Turbo at Performance Mode. 2. I had tried loading BIOS default setting and my memory was running at 100Mhz. I think when the memory configuration is set at auto, it runs at 200Mhz instead of my ram speed. I have also tried...
- neokenzo
- Post #220
- Mar 20, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

So basically my RAM wont allow me to go above 400Mhz? Does that mean I wont be able to overclock my cpu? I checked my BIOS and the CPU FSB Frequency is already at 200Mhz. Does that mean I wont be able to push my memory to 400Mhz?
- neokenzo
- Post #217
- Mar 19, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I tried that and once my pc booted up there was a loud and long beep coming from my mobo which I presumed that I cant run it at 400Mhz. So I went back to BIOS and changed it to 333Mhz. When I open CPU-Z it is only showing my memory frequency as 170.8Mhz. Is that right? What kind of setting do I...
- neokenzo
- Post #210
- Mar 18, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

What settings can I set it to in the BIOS to reach 400Mhz?
- neokenzo
- Post #203
- Mar 17, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

Thanks for that link Algere. It says I'm running my memory only on 102.5Mhz? Surely it cant be that low? How do I increase it?
- neokenzo
- Post #199
- Mar 16, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I do like the Asus mobo but there are still some things I am not sure of. 1. In BIOS, I set my memory as cas-2 trcd-2 trp-2 tras-7 The rest of it I set as auto. How do I know whether its running as 400Mhz or 333Mhz? Secondly, it takes about 1 minute for my rig to boot up. Most of it is in the...
- neokenzo
- Post #197
- Mar 15, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I tried that settings and it boot up okay and everything running fine. 2-2-2-7 next :)
- neokenzo
- Post #191
- Mar 12, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

What kind of timings do you have for your memory?
- neokenzo
- Post #189
- Mar 11, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I got my mobo to post the first time I got it set up properly, ie - plugging the ATX 12V plug in. Everything works fine and I am happy with it. I used Zalman CNPS 7000A Al-cu and my case is Thermaltake XaserV Damier V5000A series. The case comes with its own cpu fan control which I connect it...
- neokenzo
- Post #186
- Mar 10, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I'm using OCZ memory. The board did post and I let the board ran for about 1 hour to check the temp. Everything went well then. However, I havent done anything since then so I'm not sure how well will it work once Windows is install.
- neokenzo
- Post #161
- Mar 5, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

Should I download 378raid_100137.zip or 378ata_100104528.zip from Asus website for the SATA drivers? Also when during XP setup should I press F6? Edited: Edited the url :)
- neokenzo
- Post #151
- Mar 4, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I did not take out the stock back plate. I tried a little but it seems to be glued tight and I didnt want to force it incase I break the damage the board. What I did was, I took out the black thing for the original 64 fan and just use the long screw to place the fan it. It seems secure enough...
- neokenzo
- Post #150
- Mar 4, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

Man I'm sure glad I found this site. I have spend the last 4 hours trying to get my mobo to work. I tried everything and nothing seems to make it work. Here is my system: Asus K8V Deluxe Athlon 64 3200 1Gb kit EL DDR PC-3200 Platinum Limited Edition - OCZ 2 x 160GB Seagate SATA 7200rpm 8MB...
- neokenzo
- Post #145
- Mar 3, 2004
- Forum: Motherboards
N
*** Official ASUS K8V/DELUXE (K8T800) Thread ***

I was trying to install my Zalman fan but I couldnt remove the backplate. So does it work without the nipples attachment it came with? How stable is it? Since the Zalman fan is heavier, wouldnt it jeapordise the board?
- neokenzo
- Post #144
- Mar 3, 2004
- Forum: Motherboards

RESOURCES

Top Bottom