Search results

  1. A

    Windows XPe deployment on a thin client

    Anyone?
  2. A

    Windows XPe deployment on a thin client

    So I recently got my hands on a free HP t5700 thin client and wish to turn it into a car PC. I've done my homework and labored long and hard to figure out the ropes to compiling my own Windows XPe image for this device and I think I have it all together aside from one thing... I can't figure...
  3. A

    I hate Apple.

    This is an extremely ambiguous post. I can't tell if you're agreeing or disagreeing with me. As far as I know the old Windows XP stack was an open source based one that Microsoft cannibalized. People found out and got angry so they redid it for Vista with their own code. This new stack has...
  4. A

    I hate Apple.

    Umm not to burst your Apple hating bubble but that sluggish network traffic has more to do with the new TCP stack on Windows Vista. It more than likely works fine because the two Windows boxes are working with the same stack but when you put the Samba against your 2k3 box you're running into the...
  5. A

    Tuniq tower 120

    I have mine in a first generation Antec Sonata case. Its proximity to the rear case fan and the PSU case fan allowed me to just omit its built in fan all together so its "passively" cooled. A tight fit but works out well!. pic
  6. A

    G.Skill DDR2 800 HZ no longer have D9 Micron chip?

    I just got two more sticks last week. The previous ones did amazing things however with these two new ones I can't overclock more than 850mhz with all four sticks. I'm not entirely sure if this has more to do with the dual channel or if its the new ram itself, I haven't tested it all out yet. I...
  7. A

    New testing methodology at Anandtech:)

    I would estimate that AC source analyzer to be about $3,000 brand new and those adjustable DC load sources to be at least another $3,000 for all those modules. Geogous equipment, I read up on the AC piece and it has built in PFC which makes me a little gitty. I would love to get my hands on a...
  8. A

    Who said Supereme Commander runs faster with a quad-core?

    Please use the SupCom Core Maximizer, its a supplement to create perfect load balancing across all cores. It's valuable even for a duel core system.
  9. A

    E6400 - an impossible OC?

    Those are actually the memories stock timings. They can go up to 500mhz with those however when OCing the CPU I seem to be stuck at 470ish max. So I'm actually not loosing anything, and I'm more comfortable with the 1:1 ratio. As for 2.6 to 3.2, it was the VTT voltage like evetstech...
  10. A

    E6400 - an impossible OC?

    Seriously, Thank you so much for the input. After a few hours of tweaking I think I settled on my best options. For whatever reason the ram becomes unstable with CPU OCing so I thorttled it back and jacked up the CPU. Best result so far is 3.2Ghz passively cooled. These are the...
  11. A

    Vista + H.264 = WTF!

    With MPC I get about 15-20 FPS with a E6400 at stock speeds using CCCP or Vista codec packs. The free codecs are awful, they hiccup when the bitrates fluctuate. The entire time my CPU usage is only about 60-70% and yet its still missing tons of frames and becomes totally out of sync.
  12. A

    E6400 - an impossible OC?

    I just shut off the TMC and gave the NB 1.55V and I've gotten farther than ever before, 2.56Ghz. What a typical NB voltage, esp when its passively cooled. 1.55V seems out of control, or has this been the missing link all along? You sure I need to raise my VTT? I read up on VTT and GTL, they...
  13. A

    Vista + H.264 = WTF!

    I used to use CCCP, swore by it, however I gave the Vista Codec Pack a shot and it seems to work better on Vista although marginally. I may switch back because it doesn't seem to matter. They both function exactly the same for H.264. Choppy and annoying.
  14. A

    E6400 - an impossible OC?

    I've stressed the ram at those speeds and timings for quite some time while the CPU was underclocked and it checked out. The vDIMM is at 2.3 and the vMCH at 1.35V in that particular cap. Apparently its fairly common for the D9 chips. Even when the ram is at stock speeds and the CPU has similar...
  15. A

    E6400 - an impossible OC?

    So I built this system over 2 weeks ago and I'm getting fed up with it. I can OC ram no problem but as soon as I push the CPU the system becomes unstable. The best I can do is 2.6ghz, but when I stress test it the system just reboots after 10-20 minutes with no errors or warnings. The CPU...
  16. A

    Vista + H.264 = WTF!

    I'm coming to the conclusion that HD video in general is just a cruel joke, and probably isn't even worth my time. It took me long enough to get HD playing smoothly on Windows XP, I caved in and bought Power DVD 7 and it worked fantastic. Now that I've upgraded to Vista I'm in the same boat I...
  17. A

    Help need, Free Flash Video Player

    http://vixy.net/ will re-encode the links for you and http://www.wimpyplayer.com/pro...dalone_flv_player.html will play them for you if you have some downloaded http://www.erightsoft.com/SUPER.html will re-encode them if you already have them downloaded
  18. A

    SATA SMART program

    Wow haven't posted here in well over 2 years. I have a eSATA hard drive enclosure and I really would like to know what kind of temp my 500gig drive is running at in this passively cool case. There used to be wonderful programs like motherboard monitor however I can't find something strictly...
  19. A

    Difference between Dell 2405 and 2407

    It will take about a day for a geek to write up the code to go content to PC and record the signal, defeating its purpose. It just looks good on paper though when the big CEOs who have no clue about the actual product see steps being made to try and protect their investments.
  20. A

    EVGA Rocks!

    I got one of those famos EVGA 6800 Ultras that didn't make the cut, and were scaled to 6800 speeds and sold as such. The one I got couldn't even handle 6800 speeds, got artifacts. Called them up, took some haggling because it was a limited edition deal, they hardly even sold any,but they sent me...
  21. A

    Difference between Dell 2405 and 2407

    1920x1200 per channel though,right? I thought proper DVI cables had the ability to carry two signals of 1920x1200 as well as one RGB.
  22. A

    Why do people say ATi cards run hot? Check this out.

    Debating about graphics card temps is pretty stupid, considering all the variations in climate, cooling fans, their placement, air flow obstructions, dust, hardware loads, need I go on? If you want to start a flame war at least bring some content to the table.
  23. A

    Difference between Dell 2405 and 2407

    Why in hell would you ever want to encrypt a video signal? More bandwidth? I thought DVI already had plenty of headroom?
  24. A

    Asrock Dual939 1.4 Bios 285FSB????????

    does this board work out of the box with most dual core processors? i really want an upgrade to X2, but i refuse to give up my TCCD ram and AGP graphics.
  25. A

    Question about Duron Applebreds

    thorton was the only core I believe you could unlock the extra cache,and sometimes that didn't always work right. just take a look at the die,if its rectangular, then its the barton-esque core which has the possibility of unlocking. if its more square,its a flat out apple/tbred with only 256k...
  26. A

    50 gigaflops, 25 watts, all you need is a PCI-X slot

    Its not released yet,so as of now theres no clue for the software support or cost, but I'm sure it won't be cheap.
  27. A

    50 gigaflops, 25 watts, all you need is a PCI-X slot

    386's with math co-processors, revive it! This is just a nice step to offloading grunt work to a cost effective processor that doesn't spew heat. Honestly this little PCB is more targeted for large server farms to boost productivity, but has other fun implications.
  28. A

    50 gigaflops, 25 watts, all you need is a PCI-X slot

    Correct, currently its targeted at Matlab, Mathematica, and other such similar programs like autocad,however a full list of support hasn't been released. I wonder how long it would take a geek to write up the backbone in linux to treat it like a true co-processor...
  29. A

    50 gigaflops, 25 watts, all you need is a PCI-X slot

    bonk
  30. A

    Possible Upgrade, Need Advice

    I really haven't been keeping track of the latest and greatest over the last year, attempting to get up to speed. I've been happy with my current setup for awhile, DFI Nforce2, Athlon XP mobile @ 1.8, however I'm looking for an upgrade. As always though,its not that simple. Realistically...
  31. A

    '05 Winchester question

    check the SATA thread, there is problems with certain SATA ports not having the PCI lock on the NF3. try hooking your SATA drive up to port 3 or 4.
  32. A

    I am so freaking bummed :(

    its been said many times,at least on the MSI board,that using the 3 and 4 SATA ports will correct this problem. just don't use 1 and 2.
  33. A

    TCCD woes - Geil Ultra X

    it has nothing to do with my motherboard or PSU becuase before i had this TCCD,i had normal Geil Ultra series,and it pulled 500mhz no problem with this same bios and setup. i'm going to try a bios update when i get a chance.
  34. A

    athlon 64 overclocking problems

    you'll love that PSU
  35. A

    Which is better for multi tasking?

    this question has a lot of room for subjective* opinion, I wouldn't ask, I'd find a person who owns each and try their setups for an hour.
  36. A

    *deleted*

    post deleted
  37. A

    I have a theory

    the memory is probably able to do that, its the memory controller i have doubts about. it was never intended to run like that. to some degree, memory can usually give or take latency as you move the frequency in one direction. not really new info here, just not worth the effort since most...
  38. A

    Need a new AMD64 CPU/mobo combo pronto

    My friggin trusty DFI Infinity and Barton died today, no explanation, the CPU won't work in other computers(sad, really because its the best stepping and week ever made) and my mobo won't work with any other CPUs. Extremely upset about this considering this computer should have lasted me at...
  39. A

    Which memory do I go with for my system?

    as for the thread, just get value ram if your not going to OC
  40. A

    Which memory do I go with for my system?

    is this the 939 board everyone has being dieing for and waiting for that OCs like crazy and is just an all around great board? no AGP versions?
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |