i managed to do something with my E6320, i was able to OC it to 2.8Ghz with these settings
Vcore 1.29v
Vdimm 1.9v
mem is synced
FSB 1600
800Mhz
i just have stock cooling but my case has a very good airflow, i'm just wondering what kind of temps you guys have, mine is (used everest)...
@xtknight, so having a smaller dot pitch mean a better LCD overall? the reason i even considered AOC is because its dirt cheap thats why im tryin to look for a review of that product but didn't find any
hello xtknight, i'm wondering if you can provide me with info regarding the AOC 223VW. i searched your site but found nothing. this one is really dirt cheap, about ~320$ its a 22inch 5ms WS display. is it ok to use for gaming? or would you just recoomend me an LG 204WT instead? the LG is about...
just saw this from dell, Dell E228WFP its really cheap but anyone tried it? any feedbacks? still on the market for an LCD since i chose to upgrade my video card first Ü. might be an overkill but i got for a nice deal
well like i said i stuck an 80mm fan right on top the radiators to "suck" air, set fan to 100% via riva tuner and my temps now are 53C idle and 72C load with 32C temps on my room...
wonder what the critical temps are for the 8800GTX?
BTW for those others worrying about their CPU being a...
@Xtnight
thanks for a straight answer, then i'll definitely be going for that LG, only problem is its out of stock right now so ill have to wait. and yeah BTW have you heard anything about SED?
any news on the viewsonic vg1930wm? and lg 194wt? and how can i find a dead pixel in an lcd? because im still thinking about those 2 and the samsnug 940bw. the LG has 2000:1 contrast ratio so is that a big advantage?
im considering on getting a 19" wide but after seeing it, it seems a little bit small compared to my 17" CRT.. now is there an LCD you guys can recommend with 19-20" 4:3 ratio?
thanks xtknight... i'll probably use the ative res. but i still havent made up my mind on what LCD to buy since i have limited model to choose from. im outside US and a newcomer on LCD...
ok, while walking on a local comp shop i saw this AOC 193FW for about 190$ with an old monitor trade in...
already done that dude yeah i think it has something to do with how the page is coded but i got a case wherein a web page prints fine and just suddenly the printout get cutoff. any bright ideas?
im not sure if this is the right place to post this so here it goes...
a part of the web page gets cut-off when printed, and thers no option for "printer friendly" on the webpage. anything else i could do so i can print the page on a single paper? BTW using IE 6
i'm a noob in LCD and wondering if its advisable to run my games lower than the native resolution of the LCD? it seems i wont be able to run my games at 1680x1050 and will have to run them lower than that. is there a big difference?
can anyone post for a review of the dell E207WFP, or the conclusion of that review. im really aiming for this one so any thoughts is really much appreciated
best i could find here is Viewsonic 20inch VX2025WM for about $450 (Overpriced!!!) and Samsung SyncMaster 940BW for about $300, and for the dell about $340 including S&H. is it worth taking into consideration the Samsung SyncMaster 940BW?? how does it stack-up against the dell E207FPW if it were...
I have taken that into consideration but i really can't find that product my location, BTW will my OC'ed 7800GT be able to play games at that native resolution?? my games are CS: Source, HL2, GTR2, Oblivion, X3 and other FPS.
guys if anyone has a solution to this just post it here, so far i have tried reinstalling drivers, start/stop print spooler any other bright ideas are welcome.....
I just love this board, i got an increase of about 600 points in 3Dmark2005 from my previous P4P800-dlx, no problems whatsoever. using OCWB1. i'd even vote this mobo for motherboard of the year! great bang for the buck mobo with high end AGP users like me who just can't afford to dish out our...
Originally posted by: ItmPls
i still can't get my temp
r9700p
-------------------------------
my 9600XT got temp sensor, for ati cards you can use ATItool, a great software for temp monitoring and OC can also scan artifacts and can even hook-up with MBM
ASUS AX800XT-PE
stock...
OT simple question here, have an ASUS X800-XTPE AGP and as you can see on my sig my P4 2.8 is OC'ed to 3.2 Ghz, is my system a bottleneck for my video card?
my card is an ASUS X800XT-PE(AGP) and the asus smartdoctor is not working with it. they say that these cards are not compatible with smartdoctor. is there any other software that i can use to monitor temps, fan speed and others?
anybody have used this HSF? how does it perform compared to the Zalman CNPS 7000A-Cu? i'd like to know coz i might buy it considering that its cheaper than the zalman. will the gigabyte be enough to cool my system when it's Overclocked to 3.5?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.