There were two or three TY DVD-R spindles last weekend when I was there. Today there were about 12 TY DVD-R spindles. The DVD+R spindles are another story, about half and half for the 12 or so on the floor.
Went in this morning to get two packs in the TY style cake box which states made in Japan. Nero InfoTool gives media code TYG02. Be warned there were some made in Taiwan packs at the stores here and it is one rebate per household.
In stock at the Akron, Ohio (Chapel Hill) and Fairlawn, Ohio...
I was prompted to download the new Windows Update program today. I did not think anything of it but now I have the update icon stuck in my system tray. Any suggestions on how to remove the icon or go back to the previous version of the updater?
Thanks.
This was in my mailbox this morning:
Student Loan Alert Reminder!
Interest rates for federally guaranteed student loans dropped for the fourth year in a row. The new rates are 2.77 percent for Stafford loans in the grace period, 3.37 percent for Stafford loans in repayment, and 4.17...
This may be the answer to the problem. Drive through the circle drive then the boat will already be kicked back into the driveway. All you really have to do is cut the wheel and spin the trailer.
How good of friends are you with the neighbor to the left (as shown in photo)?
Is the house on a corner? Close to a corner? Most of your problems would be solved if the approach was from the other side (opposite to what is shown by the sketch).
Two sets of Rhino Ramps / Blitz Ramps would clear the median for crossing over.
Start in the middle of the road and drive onto...
Current pack is a Camelbak Blowfish (~2001) 100oz. It is beaten and just too small for holding armor. Looking to get one of the new mountain bike packs from DaKine. That EMS pack looks really nice though, could you post initial impressions when it arrives? Thanks.
After atleast 6 years of my abuse my current Gore-Tex shell (jacket) is finally starting to tear. I started looking for replacements but have not really found anything. The only two decent waterproof jackets I have owned are this shell and my parka, which is from Mountain Hardware and lined...
Intel 875P Chipset
Intel Performace Acceleration Technology (PAT)
I seem to recall the 875P chipset being a little better suited for the Prescott processors.
Although I am very happy with my current Intel system, if I were building right now a 64bit AMD would probably be the processor with an...
My comments:
Motherboard:
Another option (budget pending) ASUS P4C800-E Deluxe
Hard drives:
Segates would be nice for the 5yr warranty
Last time I checked the 160GB drives were the best price point ($$/GB)
Optical drives:
Just get a DVD burner with a DVD-ROM drive. Would save about $20.
I ordered a combo from Monarch back in May. ASUS P4C800-E Deluxe, P4 3.0C, 1GB Mushkin PC3500. The tech I spoke with on the phone prior to placing the order was quite helpful and polite. It was also nice to have the board arrive ready to go, especially since this was my first build.
He is really not too bad with a BMI of ~25. 126lbs/60in/60in*703.
My brother's BMI would be ~26. 180lbs/70in/70in*703. He's a wall of solid muscle at that.
Mine is horrible at ~33. 260lbs/75in/75in*703. I need to spend less time on computers or something. Having a desk job plus college...
This case seems to have fans in the same location. But it also has a door, if that matters.
http://www.newegg.com/app/ViewProductDesc.asp?description=11-124-034&depa=1
Update: 7.26.2004
Well I should have been more patient. The rebate showed up in the mail Saturday morning. Thanks for the help though, just in case it did not show.
Did anyone take advantage of the $30 MIR on the Antec PlusView 1000AMG when purchased from CompUSA from 5/2 - 5/8? I sent the rebate in the following week and still have not seen it. When I contacted one of the rebate centers they had no record of this deal. So, does anyone know where this...
Congrats on the nice bike. Although personally I would keep the tires. They are better than the older Tioga offerings and seem to hook up well under most conditions around here. If you really want to switch tires I would suggest a Kenda Tomac Series or WTB Weirwolf over the Continentals.
Yeah a few years ago. I think it was 30yds (8'Wx4'Hx25'L) at $170 for two weeks with drop-off/pick-up. Told them it was for construction, but put parts from an old tree in there too.
Mine has been very good to me. I like the door as it keeps dust and some people out of my system. My only real complaint is the fan clips did not like the small wires running on the outside of my LED fans. A little fiddling with (moving) the wires on the fans fixed the problem though.
Dig through some of the woodworking supply stores like Rockler, Woodcraft, etc to find some mesh inserts to put into the desk where the tower is located. Newark In One may have some inserts that would work as well or maybe even use fan guards.
If you do not have a hole saw see if the local...
I have a PlusView 1000AMG with an ATI Radeon 9800PRO. Still have a couple inches to remove the HDD cage. If the card gets too long the HDD cage can not be removed without removing the video card.
If the hard drive was mounted elsewhere and the HDD cage removed it would probably work fine...
Try to keep the door perpendicular to the case, then depress the small tab (very close to where the door meets the case) to slide the upper over the pin.
This might help:
http://forums.anandtech.com/messageview.cfm?catid=37&threadid=1328538&enterthread=y
My Suggestions:
http://www.newegg.com/app/ViewProductDesc.asp?description=11-112-049&depa=0
http://www.newegg.com/app/ViewProductDesc.asp?description=11-119-042&depa=0...
The 5.25 in. and 3.50 in. bay covers are snap in plastic pieces. Use a long skinny screwdriver to pop them out from the inside of the case, then twist out the metal tabs. Be careful what goes in the top 5.25 in. bay as it could keep the door from closing. DVD/CD devices should be fine in this...
If it is the piece by the front drive bays, then it is for long PCI card support. Atleast that is what the part is listed as in the manual for the Antec PlusView 1000AMG.
To the original question, my Cooler Master fans fit the clips quite well. Not too sure if it creates more vibration in the...
I have checked into the Hardcano 12. The biggest concern I have is the device resets itself upon reboot. At this time I am not sure if this is good or bad.
My final choices are looking like:
Coolermaster: Aerogate II or Cooldrive 4
Superflower: Fan Master
Thermaltake: Hardcano 12...
Sorry I do not have a camera here so no pictures. But if I try to look into the front of the case at a slightly upward angle I can see the inside of the case, so I am guessing it will work. My front two fans are the stock Antec units and I am soon replacing them with two more of the...
I have the same case. Used the two stock fans in the front and three CoolerMaster fans (the same ones someone16 linked) for the side and back.
I strongly suggest you order five of the CoolerMaster fans. One, it will save a few bucks later if you decide to add a fan controller and want speed...
Dig here:
http://www.silentmaxx.net/silent_products/fans/PAPST/40_50mm/40_50mm.html
Ad Edit: I have no informaiton on this company so please be cautious.
The fans are the small 3-wire connectors by default. Coolermaster was nice enough to include adapters for molex connectors.
Another thought, use the header on the motherboard for one fan and put the remaining four on a controller. Just not sure which fan I would want on the motherboard...
Thanks for the review link.
I thought the third wire was speed control. Is it actually a monitor/sensor line? None of the case fans are plugged into the motherboard and just run continuously.
Fan Specs:
Coolermaster TLF-R82
Fan Dimension 80x80x25 mm
Fan Speed 2500 rpm
Fan Airflow 32.11 CFM
Fan Life Expectance 50,000 hrs
Bearing Type Rifle bearing
Voltage Rating 12V
Input Current 0.15A
Input Power 1.80W
Noise Level 25.0 dBA
Connector 3 Pin
LED Color Blue
Weight...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.