Search results

  1. G

    p6td no post, no beep

    Yes I have... I tried alternate PSU, different ram, replaced CPU, different graphics card. Took the battery out. Nothing worked. On a whim I put the original graphics card back in, original PSU and one of the original ram sticks in A1 slot. It booted! So then I started adding everything back...
  2. G

    p6td no post, no beep

    EDIT: erm cant edit post title. Its the p6x58 board, the p6t was the old one. Need more coffee. Last couple of days its been weird on boot (single beep but no boot, double beep but booting with 8gb ram showing rather than 12). Today it wouldnt boot, pulled out ram > no beeps no boot. Tried...
  3. G

    Xeon L5639 Overclocking on X58

    duff pump - back to air and reduced my overclock a bit :) Next question - can I run 32gb? All the ram posts I've found are from 5 years ago. I know the manual says you can still have triple channel with 4 sticks of ram. this is what I'm poised to buy...
  4. G

    Xeon L5639 Overclocking on X58

    no i didn't know there was corsair software - i'll hop to it! i dont have a great aircooler, i'll try the pump software first
  5. G

    Xeon L5639 Overclocking on X58

    From this post: http://forums.anandtech.com/showpost.php?p=36707876&postcount=1593 And yes the CPU offset voltage i've got is 0.2. Only other difference is BCLK at 190 (so ram speed a bit lower too), and dram voltage at 1.64. Also set my ram to 8:8:8:21, as its rated CL7. The chip was on the...
  6. G

    Xeon L5639 Overclocking on X58

    I just put am x5650 in a p6x58d as my p6td died. I followed burpos overclock more or less to the letter (set the bclk to 190, and dropped the voltage offset a bit). I'm using a corsair h100i, which I've given a good clean. I'm getting idle temps of 53 (core 10 is a hot ah heck). And prime95...
  7. G

    this is an ex-motherboard

    i think its the corrosion thats the problem, not the cap. :(
  8. G

    this is an ex-motherboard

    my computer got zapped by lightning a few weeks back. It was flaky for a while but weirdly seemed to be ok - especially after i replaced the graphics card. Today it wouldn't boot and after a fair amount of farting around I noticed one of the small capacitors near the graphics card pcie slot...
  9. G

    Xeon L5639 Overclocking on X58

    urgh
  10. G

    Xeon L5639 Overclocking on X58

    Thanks burpo, yes I used your screenshots to check my settings and tweak a few things. I've got a p6td deluxe v1. Its 5 years old, I can't believe I'm getting these speeds from a 5 year old rig! It also means I don't have the offset option. The multiplier is set to 22 in the bios, and c state...
  11. G

    Xeon L5639 Overclocking on X58

    hi folks, spent a couple of days getting into this. Thats where I'm up to. 2 things: qpi voltage is 1.325, dram bus volt is 1.64 (its 1.6v ram but running now at 8-8-8-27, 1536mhz) everything else on auto (except all the speedstep stuff). there's nothing in those voltages that looks dodgy is...
  12. G

    noob x5650 overclock on x58

    thanks folks, yeah slowly getting my head around it. got it up to 4.29 ghz, but the multiplier keeps knocking it down when running prime. I suspect CPU temps, but I'll post on that thread jason mentiioned :)
  13. G

    noob x5650 overclock on x58

    thanks the overclock.net thread is huge!. Did you mean this one http://forums.anandtech.com/showthread.php?t=2371758 thats only a page. But that sort of level much more useful to me the overclock.net stuff is full of hardcore overclockers - its a bit above me (like in the same way that the...
  14. G

    noob x5650 overclock on x58

    Board: asus p6td deluxe v1 I've got it up to 3960mhz by only changing the bclk - to 180 and the multiplier to 22 But its not stable - crashed after 30 mins of prime95. EVERYTHING else is an auto. I said I was a noob. Core temps got up to about 65degrees. Every time I try to to change...
  15. G

    Ocz Vertex 2 or Intel G2 120GB?

    eeek. I had a very bad experience this year with onboard raid. I've sworn off it until its either under linux, or I get a dedicated card with battery back up.
  16. G

    Ocz Vertex 2 or Intel G2 120GB?

    are we talking about this drive: OCZ-SSD3-2VTX120 3.5" 120GB SSD Vertex II because its a lot cheaper than intel over here in Australia. I've currently got 80gb intel, looking for more space: I need something reliable though. I'll use the 80gb as photoshop scratch :)
  17. G

    hitachi 2tb in raid - bad idea?

    I do nightly backups to a windows home server. Once I put the wd greens in it I'll be able to mirror the backup as well. 4x wd blacks are a bit out of my budget and to be honest if I was paying that much I'd fork out the extra $$ for the RE drive. The reason I said the intel raid sucks is...
  18. G

    hitachi 2tb in raid - bad idea?

    that would be me pretty much - occasionally I'd be reading/writing video which would give them a workout, but I'd also shutdown most days. its either 4 of them in raid 10 or 2 of the others in raid 0
  19. G

    hitachi 2tb in raid - bad idea?

    just found there are 2 flavours of the hitachi, desktar and ultrastar I was looking at the cheaper one Deskstar 7K2000 not the Ultrastar A7K2000 just wanted to check we're talking about the same drives :)
  20. G

    hitachi 2tb in raid - bad idea?

    thanks for replying. You're running the 2Tb hitachis? No problems with heat? thanks for the heads up on the card - that one was one of the cheaper 8 port ones I could find (so I could expend the raid in future). In my price range I've found Asus PIKE 1068E 8-port Intel 8-Port Internal...
  21. G

    Which HD's to use...

    have a look at windows home server. I was initially very sceptical, (and loathe microsoft generally), but after a wobbly start it seems pretty robust. You can shove any amount of any size drives in it and they show up as one enormous drive. You can specify how many drives mirror the content...
  22. G

    hitachi 2tb in raid - bad idea?

    I'm currently using onboard intel raid (which sucks) with 4x 1.5 TB WD greens (which suck for raid) in a raid 10. Used for storing shed loads of BIG psds and video. Need the speed for the video want the data redundancy for those precious images (backup to a windows home server every few days)...
  23. G

    12gb for i920 system

    so I've narrowed it down to patriot extreme viper or geil evo one (both cas7) (links below) Any showstoppers here?! thanks http://www.newegg.com/Product/Produc...+ddr3&x=8&y=34 http://www.newegg.com/Product/Produc...-348-_-Product its for a p6t deluxe, BTW and i7 920 which I'll OC a...
  24. G

    12gb for i920 system

    Was wanting to get ocz platinum 12gb 7-7-7-24 kit but seems to be out of stock everywhere - possible discontinued. Anyone know an alternative with tight timings? Would it be a problem to use 2x6gb kits of the same stuff? (its going in a p6t)
  25. G

    builindg a photoshop machine

    CS2 at the mo, CS3 in a few months! yes I can get everything mentioned in OZ - thanks for all suggestions, will check them out - I've got both intel and Asus boards at the mo will check these 2 out - Gigabyte S3 is cheap for its functionality BUT... Done a bit more research - apart from...
  26. G

    builindg a photoshop machine

    thanks for the info, but why thumbs down for xp64? I've heard mixed things, but dont really understand why it would be worse than xp apart from driver availability - I'll just go with XP if its a lemon (and live with only 3 gb being used) By the way, I've seen some opteron server...
  27. G

    'Revolutionary' new cheap printer to come march 21?

    hmmm. I'm dubious: that wide format printer is printing so fast that the data would have to be going at ridiculous speeds - maybe someone more tech minded could work it out, but an A1 image (the first one through looks even bigger than this) prints in about 4 seconds. Thats about 200mb that has...
  28. G

    builindg a photoshop machine

    My AMD64 3500+ system is feeling slower by the week. I want to spend about 2K AU$ (about 1.6K USD) but I wont need case or power supply or OS. Thinking of going xp64 route (vista 64 not an option), and starting with 2x2gb dimms so I can expand. RAM is the main thing I need - processor...
  29. G

    server slows to halt copying files over network

    Its a windows small business server running on foxcan AMD motherboard 1 gB ram. The computer is completely unusable when the files are being copied, but the page file usage is not extreme. CPU load peaks at about 25%, page file currently reading 768MB. I've terminted a load of processes, but I...
  30. G

    riad 5 on board

    Anyone know which current boards have got raid 5 on board (preferably AMD), and prefferably NOT with the controller running through the PCI bus? Getho
  31. G

    stable 4gb board

    I like the sound of 4gb on the new DFI board, but I've got a matrox p650 that wont fit. (And I just dont need all those bells and whistles!) Anyone have any idea if the uli chipset that has both agp and pci will happily take 4gb and run stable at 400mhz? Getho
  32. G

    Biostar k8nha grand memory weirdness

    I'm using TWINMOS desktop PC3200 ram, matched pair 2x512MB. Board wont post with this ram or with 2x512 kingston value RAM with 2 sticks in the board. (one stick is fine). I've loaded newest bios. All biostar would say is "it might be motherboard or CPU issue" I've got all the memory...
  33. G

    monitor fries ram?

    I'm on my 3rd system in 3 years thats had memory woes. The only bit of hardware in common is the monitor (a sony g420). Recently its started doing this thing where it goes out of focus, and then with a static "ping" the screen jumps and comes back into focus. Just got me wondering a) whats...
  34. G

    does 939 suck?

    Sound advice, yet in reality I'd be waiting at least 6 months until the 1st revision boards get revised, I dont think I can wait that long. I guess I can update my motherboard later, and still use the RAM CPU etc... The reason I questioned the 939 platform is that so many 939 motherboard...
  35. G

    new system - how are these bits

    I've spent literally weeks looking through this board and athlonMb. I think I've finally come to a desciison. I'll be doing photoshop mostly - BIG files. Wont be overclocking at first. Can anyone see if I may have any problems - or other suggests for components? Just in case anyone else is...
  36. G

    does 939 suck?

    And yet I've heard bad things about the reliabilty of Asus boards too, recently. BTW: this is not a value judgement of 939, I'm just trying to find a robust system to replace an ageing unreliable one, but I guess nearly everyone figured that already.
  37. G

    does 939 suck?

    I've spent the last couple of months looking into my next board - which was to be a 939 board. Every board available has some issue or other. I was hanging out for the most recent EPOX 939 board but a visit to athlonmb put me straight there. Soltek board has memory issues, NEO2Platinum has...
  38. G

    lotsa RAM Intel AMD 754 or 939

    manipulating BIG 16 bit photoshop files 800mb to 1.5gb. I've been writing to the manufacturers to get their reccommendations - biostar wrote back straight away, gigabyte & asus did eventually. Msi sent me a link to their FAQ (not good), epox sent me a reply in tiawanese english which was...
  39. G

    lotsa RAM Intel AMD 754 or 939

    Been hanging on for the epox 939 board, with the idea of putting 4GB of ram in it. Rumours are it wont work with 4GB. 2 questions: will any (non xeon) intel boards take 4GB? And... If I can only use 2 GB should I just get a 754 Mboard and put 2 sticks of 1 GB in it - if so which board...
  40. G

    Epox 939 9NDA3+

    Thanks, I'll try athlonmb, thanks scap silicon for trying to answer but I'm afriad ihniwyata (I have no idea what you are talk about :)) Getho
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |