I have zero issues with a 2 year old jvc AR head unit or a lasonic boombox with bluetooth. At work my dell computer sometimes requires me to shut my phone off and turn it back on to sync though.
I'm curious if it is a radio compatibility issue. I've seen something similar with a certain...
I run a synology ds413j and use a wd tv live for plex and works pretty well. The nas isn't going to trans code so obviously you need to make your player can support the formats you have. The roku wouldn't do 1080p mkv's without crashing where the wd tv live will (i believe your google tv will...
I have an amd fx4100 and it was a decent upgrade for my athlon II 620. It doesn't use much more power so I wasn't bothered there but the 8000's seem to use quite a bit more. If they can get an 8 core with similar power to the fx4100 and have it at 4GHz stock I'll be ecstatic.
The athlon II at 2.6GHz is about on par with the fx4100 at 3.3Ghz. At 4.4GHz on the bulldozer I'd probably need the athlon II at 3.8GHz to be comparable, which would require a pretty crazy fsb.
Yeah I had to up my voltage to 1.47v to get 4.4GHz stable. The tx3 coolermaster shows my temps good. I don't really want to push it much more and risk killing it right away. I should get an 8120 for free though in a few months when my buddy gets a piledriver.
I have a coolermaster tx3. Pretty cheap but it is easy to install/remove without taking the mobo out and performs a smidge better than my thermalright 128se. I have it at 4.4Ghz now, seems 4.5Ghz it gets a little flakey and takes a little more voltage than i like. Doesn't really get all that...
Mines doing 4.2GHz at default settings no problem! Now 4.3. I have two 6870's in crossfire so showing around 60% gpu load and a lot better frame rate than the 2.6GHz athlon II. If I could get 4.5GHz I'd be happy as a clam
A lot of the 4+1 have larger phases it seems from reading so it isn't too bad. The msi 8+1 are still blowing too. Seems asrock and asus have the best power setup right now.
I got a basic coolermaster hyper that reviewed ok for $15. My athlon II could hit 3.3GHz but my mobo is going out and an old ddr2 one. I have 16GB of ddr3 sitting around so I had already ordered a mobo so should be good. Even at stock speeds it would be comparable to the athlon II i'd imagine...
From the overclock forums they are recommending to avoid msi boards. Their power sections have something wrong and blow up really easy it seems. I just ordered a gigabyte 990fx ud5.
When I had 3Mbs my netflix would constantly switch between hd and regular quality and would pause, think every couple minutes doing it. So if you can get like 4mbs somewhere at least get that.
What are you hooking into your network on the guest house? You could possibly setup something with dd-wrt/tomato with one extra router. Client bridge/repeater bridge type thing
You could get a basic Giant mountain bike that would be decent for what you want or maybe a hybrid/cycle cross bike would be best too depending on the amount of loose gravel vs packed.
That is a decent sound card. The parts aren't going to be upgraded much if you change it. You may gain more sound processing ability (eax) etc but not sound much different.
What about getting a smaller suv/wagon with a hitch setup and having a trailer that is for the dj equipment. That way when she is done with it she can park it and not worry about unloading if she needs the car.
I'd be worried about an ls1 at that price if it was rebuilt. I'd really just get a lq4 and do a cam/valve spring swap. Both motors stock springs and cams are weak. The weight difference is negligable between the two at 50lbs. The 6.0 block if late enough will have the l92 heads (ls6 heads)...
The 2.5L is mediocre in power, fuel mileage, etc. For $16k you could save a little more and get a new focus that gets almost 10mpg more combined or a cruze.
The problem with the 5.3L vs the 6.0L is the L92 heads you can get dirt cheap for the 6.0L are z06 heads. The 5.3L heads are a bit lesser in quality and after market ones are 3x the cost of the L92 heads. So even if you save $500 on the 5.3L you are going to pay $1200 for comparable heads to...
He would want the t56 imo. I would seriously call current performance. You would get a custom tune for the exact heads, engine, cam setup that you have and be streetable. A guy on the s10 forum is still using the same harness from a 5.3L build with 400hp to a 800whp 6.0L build now all using a...
Does megasquirt control the transmission? If not you have to look at a 700r4 which is a pain in the ass imo.
LQ9 was only available in the ss silverado for a few years. It just had slightly higher compression ratio and for the cost he can get some l92 heads, valve springs, cam and do better.
Call current performance about getting a stand alone harness and computer program setup.
http://www.currentperformance.com/eng_mgt.html
Also why do you want the 4L80E? The 4L60E is good when rebuilt correctly for 500-600hp and weighs quite a bit less and cheaper. A stock 4L60E or 4L80E...
You will cause batteries to discharge the stronger one into the weaker one often doing this. You should setup a relay or something so they only are together when on or needed. Also fuse please.
Warranty doesn't usually cover wear items I'd imagine unless the calipers hung eating up the pads.
If the noise bothers you that much go to oreillys and buy the midgrade pads for $40 and put them on yourself in an hour or two.
Masters in IT = doing research or planning on being a teacher. Go do shit help desktop support now while in school or you will graduate unwanted by anyone. You don't get a degree in "it".
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.