Search results

  1. A

    32 vs 64 Bit OS

    DDR2 memory prices being so low, it worth getting 4 or even 8GB RAM. Switching to a 64bit OS (XP x64 or to the slower Vista x64) sounds like a necessity if you want to get the full advantage of your memory, if you want to run 64bit appl. or if you want a easy way to use more than...
  2. A

    e2180 not yet available ?

    Of course E2180 is available, since I have it (in Europe) for a week now... http://img74.imageshack.us/my....4ghzeistenabledpt5.jpg][/URL]
  3. A

    Core 2 & AM2 Motherboards - Recommendations and Complete Lists

    AMD-K6-2 (Chomper)'s top speed was 550 MHz: http://www.amd.com/us-en/Proce..._118_1260_1217,00.html And there was a K6-2+ with top speed of 570Mhz: http://en.wikipedia.org/wiki/A....28CXT.29.2C_250_nm.29
  4. A

    Athlon XP vs Athlon 64

    Btw, NF2 chipset is supported very well by Vista.
  5. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    No, with the official 3.6 BIOS
  6. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    I flashed back to 3.50 because sometime, the system won't boot at power on, and I needed to reset to make it boot.
  7. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    I flashed the official 3.6 version, so far so good, but I noticed no differences from the 3.5.
  8. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    So, what is the latest/best BIOS for this MB ? I saw in the avi85's signature the 3.71 version ? Thank you !
  9. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    E3
  10. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    Yes, I have a Venice 3200+ set on 250x10, vcore default and 3.4 BIOS.
  11. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    I have 3.40 BIOS version and I used severel boot sequences that worked fine: ODD/HDD/FDD - is the one i have now FDD/HDD/ODD HDD/ODD/FDD.
  12. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    3.40 seems to solve the errors reported in Memtest86 ! That's very good :)
  13. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    Live Update also has been updated.
  14. A

    So why should I go AM2?

    I think Core 2 Duo is the obvious choice...
  15. A

    Socket AM3 will be released in 2007 according to a few sources. If true, then AM2 is probably worthless. *Links inside*

    But 754 outlast 939 ;)
  16. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    Yes, and it has mosfets heatsinks ;)
  17. A

    More AM2 Benchmarks

    Switching to DDR2 may only help the future AMD quad/multi-core CPU's.
  18. A

    Faster Athlon 64's or X2's coming before AM2?

    FX60 seems to be the last 939 CPU...
  19. A

    AMD's response

    Yes, but for the average user it would be even more important if the software developers will build better and more multithreaded apps. Much more important...so your future dual or quad core CPU won't keep idle most of the cores most of the time :)
  20. A

    CPU USAGE @ 100%

    Same CPU and FF running here and no problems, I mean CPU~2%. Check for viruses...
  21. A

    AMD's response

    Yes, rendering is another story, which can be paralelised fine. But, for most CAD modelling work wich consist for example in computation (in complex 2D sketches), updating features and associative drawings, or managing large 3D assemblies with their constraints, a multi-core CPU hardly helps...
  22. A

    AMD's response

    Comme on Duvie as you can see there Catia is multithreaded only in DMU and Analysis modules, UG NX only in some functions like boolean and offseting operations and so on. All I want to say is that this kind of software takes more benefits of a single high speed core than of a dual-core CPU. At...
  23. A

    AMD's response

    OK, if you call CAD software like Catia V5, Unigraphics NX, SolidWorks, SolidEdge, etc. "old shite"...:)
  24. A

    AMD's response

    Conroe has a different history than Yonah, it's not coming from a updated PIII.
  25. A

    AMD's response

    Yet most of CAD/CAM/CAE software is singlethreaded, so best option for running this kind of software is high speed single core CPU.
  26. A

    IDF 2006 - Conroe Merom and Woodcrest info

    AMD isn't able to cut that much, because is not such a profitable brand as Intel. It's profits are barely 5% of incomes, when Intels's profits are 20% of incomes...
  27. A

    IDF 2006 - Conroe Merom and Woodcrest info

    LOL! And when will you come up with more comprehensive benchmarcks ?
  28. A

    IDF 2006 - Conroe Merom and Woodcrest info

    But they lag in integer too...
  29. A

    IDF 2006 - Conroe Merom and Woodcrest info

    See above, ~ 530$
  30. A

    IDF 2006 - Conroe Merom and Woodcrest info

    Conroe prices over here: http://www.dailytech.com/article.aspx?newsid=787 It seems the only CPU option.
  31. A

    IDF 2006 - Conroe Merom and Woodcrest info

    Spring IDF 2006 Conroe Preview: Intel Regains the Performance Crown
  32. A

    IDF 2006 - Conroe Merom and Woodcrest info

    Why ? Later edit: stay tuned, it seems Anand will post some fresh benchies ;)
  33. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    You are right, but you can make sure what is the cause : the memory or the MB if you test ok (or not ok) the same memory on the other MB.
  34. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    Get the VDIMM to 2.65 or 2.7V first.
  35. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    Increase the VDIMM to at least 2.65V, and make sure you have 3.13 BIOS version and CPU to NB Frequency at 800 MHz. Your succes in overclocking the CPU depends mainly on luck :)
  36. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    Reported temperatures were closer to the reality (and a bit lower than before). But DFI somehow managed to get 4 DIMMs in 1T with LANParty UT RDX200 mainboard. More here: http://www.anandtech.com/mb/showdoc.aspx?i=2572&p=5 "However, what is truly unique is that the DFI LANParty UT RDX200...
  37. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    Quality 2x512 should be enough. You'll need 2GB in the future, just sell your memory and buy a 2x1GB kit.
  38. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    I confirm Memtest96 errors with 3.2 BIOS, in spite of running fine Prime95 and SuperPI, and having no BSOD. It's sad because the temperatures were corrected in this version, but for safety I flashed back to the unofficial 3.13 version.
  39. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    PC Alert4 reports the same temperatures and voltages. And no, there is no Vcore adjustment...:(
  40. A

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    I haven't noticed any differences yet. I haven't had the time. I used C:\Program Files\MSI\Live Update 3\FlashUty\AMI\WinSFI.exe for updating in Windows mode. BTW, the 3.2 is dated in Feb 7 ;)
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |