When I ping the gateway(192.168.1.1) its mostly between 10-20ms....on rare occasions its 1ms. Im unable to figure out why this is happening. My router is the Asus RT-N56U. My laptop is the Thinkpad X1 carbon. Below is some info of my network adapter :
SSID: virus.exe
Protocol: 802.11n...
I have three wireless routers in three floors at our family home. 2nd router to the first router via the Lan port on the 1st router to the Wan port of the 2nd router one. Same connections for the 2nd and 3rd router. Is there any disadvantage of doing this as opposed to a single NAT?
Thanks in...
Is there any advantage of using Google's DNS over my ISP's? If yes, what are the advantages and disadvantages? Thank in advance for any feedback you are able to provide.
Thanks for pointing out this. I think this is it. The previews building ran without a hitch for 8 hours or so. The core temps were hovering around 55-60C. There is a turbo mode in the bios which is defined as :
Allows you to enable your core processors speed to run faster than the base...
Thanks for your reply. A year old. Any idea on how I can underclock it? I cant figure how to do it. Asus UEFI BIOS UTILITY is what my board has.
Nothing was upgraded in the year barring the SSD drive . I have a 256 EVO before and now have 1 1TB EVO.
I noticed in toms hardware forums that...
I'll do this on monday but will not be able to change the heatsink/fan. I'm in India and most heatsinks/fans and insanely expensive ( about 2 times the cost in USA) so will have to wait until somebody I know comes from the USA.
I'm getting ~2000 rpm only. Pic taken of the speed -...
How do I do this? I cant seem to find a way. This is how my AI Tweaker is setup - https://dl.pushbulletusercontent.com/JLynX7lWFdwoFiW5n9FxUiNdwRFOHRv2/IMG_2419.JPG .
ASUS UEFI BIOS Utility is what I have. https://www.youtube.com/watch?v=kJs1nY8_CY0.
Looks like I just got lucky somehow and the problem resurfaced. The rar file extracts fine and crc check of the file has no problems but while building previews in Adobe Lightroom 6, the system restarts/shutdown and Asus anti surge bios message kicks up. I decided I'll use HWmonitor and log...
Fried half of my brain in the last few days figuring it whats going on. It is a Win 10. I clean installed(other other program being winrar) Win 10 atleast a few dozen times and tried extracting the rar file and each time the system would just turn off. CRC check of the file also resulted in the...
Got a new replacement PSU from Antec. Still same issue. Shutdowns when I try to extract the rar file. Also shutdowns as I'm building previews in Adobe Lightroom. This is the error I'm getting - https://dl.pushbulletusercontent.com/rFynIm6I99T6pSIfHTpo4AjPxg2VUjE7/IMG_2410.JPG I'm going to remove...
Just did this. Still shutdowns while extracting the rar. Also updated to the latest BIOS. No luck there as well but an error showed up during POST with the following message "Asus anti-surge was triggered to protect system from unstable power supply" When Prime95 small FFTs torture test is run...
Tried on a USB drive. Same issue. Its almost like instantaneous. If I click the CRC check it keeps checking and somewhere midway it will shutdown abruptly.
Spare my ignorance but I'm not sure what the southbridge and VRM is. But if it is what it is I marked on the screenshots...
Thanks for your reply
Strangely speccy and hwmonitor shows 115 but when I restart and check in my Asus UEFI BIOS utility it shows regular 30C.
I cant tell if the memory usage is high or not because as soon as I start the extraction of the rar file the system shuts down. I ran prime95 small...
I'm on Win 10 pro with all the updates installed. I just did a clean install today think something went wrong but the problem has not stopped. The system is pretty much like new with barely any programs installed and the problem still happens. I'm using Winrar 5.21. When I try to extract the 6GB...
As opposed to registering with the site's authentication system? A friend recently was telling me that I should always use Facebook/Google login option as passwords are encrypted. In the case of site's which have their own registration/auth system he said you can never be sure if your password...
I wouldn't give installation permissions to my parents. This is the easiest way to get infected with a virus/malware. Friends of theirs got scammed recently because of this. Google "ammyy tech support scam".
A common problem is them using USB drives. Amongst their friends and circles they shares pictures on USB drives and it has always been the first source of virus/malware in my parents case. I just want them to have a trouble free and a safe session whenever they want to use the computer. Other...
I have no knowledge of nix. They'll be intimidated too if they are presented with something they are not already familiar with. Thanks for your suggestion.
The computer will be used only for making travel bookings, email, office 365 and at most facebook. What can I do to ensure they dont mess with any of the internals of the OS? I dont want them to be able to install(for that matter uninstall), get any virus, install any addons or malware to make...
Back when I was younger if I wanted something I just couldn't wait and would go and get the gadget but of late I've been waiting for like 2-3 months of the release and then making my purchase. I feel good about this change as I pretty much know everything I can expect from my purchase. Back in...
I just connected my new 7770 to my U2711 and the resolution is awesome! The text is small but I think I like more real estate and live with it without increasing the text size.
My config :
Operating System
Windows 8.1 Pro 64-bit
CPU
Intel Core i7 @ 4.00GHz 46 °C
Haswell 22nm...
I got a Geforce 730 and connected my gfx card and monitor with a DVI-D dual link cable and the resolution is now 2560x1600. Problem is the text is all fuzzy and pixelated. What gives? Could it be the quality of the DVI cable is bad? Anybody experience this before? Ordered a new DVI cable which I...
The onboard graphics of the board has capability of outputting at 2560x1440@60hz via HDMI but my display's native resolution can be achieved only thru display port and dvi. Will a HDMI to duallink DVI cable do the trick?
I dont game. R7 240 wont work because it has a single link DVI supporting a max of 1920x1200. GT 730 is dual link DVI and supports 2560x1600. I think I'll get the GT 730. I have to achieve 2560x1600 resolution via DVI or Display Port only because of monitor limitation.
My bad. HD4600 it is. For some reason I cant even select 1920X1600. These are the options I have -
I dont have a display port but do have HDMI. The issue with choosing HDMI is that my monitor manual(Dell U2711) explicitly says only 1080p is supported via HDMI. If the monitor is to run in...
Using the latest firmware for the board and also the latest drivers for the graphics.
Z97 - BIOS Version/Date American Megatrends Inc. 2305, 09-10-2014
Intel HD Graphics - 15.36.7.64.3960
I cant get the onboard graphics to work at 2560x1440. I dont even have the option to select 2560x1440! My monitor Dell U2711 supports 2560x1440 only via displayport and DVI. HDMI supported max resolution is 1080p only.
Wow really? I just looked up the motherboard manual and didn't find a reference to single link.
The easiest way around seems like getting a 260X by investing an additional $100.
Using a dual link cable. This is how both end of my DVI cable look like - .
Motherboard manual says a max resolution of 1920 x 1200 60hz is supported via DVI-D connection.
I recently upgraded my system and my new motherboard has Intel HD Graphics 4600. Problem is a connection via HDMI will only out 1080p output (limitation of the monitor) although supported by the graphics chip. In the manual of the monitor, its clearly mentioned that display port and DVI dual...
I installed Win 7 SP1 and now am running Windows update. What drivers go next and in which order? Do you install chipset drivers? Also do you use the drivers utility CD or download drivers from the web? My build is the following :
i7-4790K
Asus Z97-K
16GB Corsair 1866RAM
Samsung 840 Pro...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.