Search results

A
24 inch crt's

Watch ebay. I got 3 21" Sony Trinitrons for $25/each. Shipping wasn't an issue since I bought them from a local seller and showed up with a van to pick them up. I've seen 24" Sony widescreens go for $300 to $400 - they don't get discounted nearly as much.
- aelfwyne
- Post #6
- May 7, 2007
- Forum: Graphics Cards
A
x800 to 7600gs

I wouldn't. You're making a sideways upgrade, not much improvement. You'd get shader model 3, but not much performance improvement. Hit up ebay - I just sold an x850xt for $88, and there are even better deals on there as well.
- aelfwyne
- Post #4
- May 7, 2007
- Forum: Graphics Cards
A
Overdrive disabled in ATI 7.3 drivers?

Okay, I installed ATI Tray Tools Beta for Vista... which is a bit buggy and was using huge amounts of CPU. However, after I installed it, the Overdrive option reappeared on CCC. Problem solved.
- aelfwyne
- Post #4
- Apr 4, 2007
- Forum: Graphics Cards
A
Powercolor X1950 Pro Overheating issues. Help!

FWIW, I've had this issue before with PowerColor. It was a LONG time ago - Geforce 2 days - but it was the exact same thing. Card would not run stable at stock speeds. In that case it was supposed to be a Pro, and when I removed the heatsink, it turned out it was a non-pro chip on a pro PCB...
- aelfwyne
- Post #7
- Apr 4, 2007
- Forum: Computer Building
A
Overdrive disabled in ATI 7.3 drivers?

I am running an x850xt in Vista. I was using Overdrive from the CCC (control panel is not an option in Vista, only the control center). Now, after updating to the 7.3 drivers - overdrive is missing! WTH happened and more importantly, how do I get it back? I'd rather not use ATI Tool and ATI...
- aelfwyne
- Thread
- Apr 4, 2007
- Replies: 3
- Forum: Graphics Cards
A
Powercolor X1950 Pro Overheating issues. Help!

47-48C is not overheating. If the card is crashing at those temps, there is definitely something seriously wrong and you should return it. You didn't say if the card actually is causing problems, but it should be able to go MUCH over those temps. GPUs have a much higher heat resistance than...
- aelfwyne
- Post #2
- Apr 4, 2007
- Forum: Computer Building
A
Logitech LX7 Mouse Driver Issues

I'm using a Logitech Cordless Desktop keyboard/media remote with an LX7 Cordless Optical mouse. The combo came originally with an LX5 mouse, but the LX7 works with the same receiver... The problem I'm having happens with EITHER mouse, the LX5 or the LX7... The mouse basically goes "vanilla"...
- aelfwyne
- Thread
- Mar 20, 2007
- Replies: 0
- Forum: Mice
A
Vista blue screen with Divx, Xvid

(oops... accidentally double posted.. moderator delete this one please!)
- aelfwyne
- Post #12
- Mar 6, 2007
- Forum: Operating Systems
A
Vista blue screen with Divx, Xvid

No bluescreens here from xvid or divx, have ATI and 7.1 drivers (haven't updated yet, maybe I shouldn't?) ... I'm using the Vista Codec Pack as well as FFDShow.... I *DO* get Media Center crashes when previewing XVid/DivX files, however But they do play, as long as I don't get let Media Center...
- aelfwyne
- Post #11
- Mar 6, 2007
- Forum: Operating Systems
A
Which AMD cpu?

939 chips are in demand due to people who are wanting to upgrade yet not ditch their DDR memory for DDR2, and/or don't want to lose their AGP video cards. Socket AM2 requires DDR2, which is a significant cost difference if you're upgrading, and DDR2 offers ABSOLUTELY no performance advantage...
- aelfwyne
- Post #10
- Mar 1, 2007
- Forum: CPUs and Overclocking
A
Upgrade options for my 939?

I've got the Opty 170, overclocked to 2.9ghz on a DFI LanParty... I see no reason for an upgrade for at least two years, myself.... wait until the nextgen quadcores are out into the lower price range.... I'm sure I can hold out - I had the previous Athlon64 3500+ single core for over 2 years...
- aelfwyne
- Post #13
- Mar 1, 2007
- Forum: CPUs and Overclocking
A
Windows Vista Ultimate 3-pack DVD OEM @ the 'egg

So does anyone have links to back up what has been said here about the OEM being limited on activations? I'd hate to buy the OEM from the 'egg, and then lose all use of it should I decide that my DFI LanParty becomes outdated, or if I have to reinstall more times than they think is Kosher.
- aelfwyne
- Post #16
- Jan 23, 2007
- Forum: Operating Systems
A
Where to get ATI Silencer 5 Rev 2?

Yeah... I currently use ATI Tray Tools.... since the default fan speed profile on many x850XTs is borked anyway (fan turned off until card is baking at 90+ degrees)... They probably did that in an attempt to control the noise... However, at low speed it growls/drones. I can hear it even at 10%...
- aelfwyne
- Post #7
- Jan 10, 2007
- Forum: Graphics Cards
A
Where to get ATI Silencer 5 Rev 2?

What do you think of this one: http://www.newegg.com/Product/Product.asp?Item=N82E16835118116
- aelfwyne
- Post #5
- Jan 10, 2007
- Forum: Graphics Cards
A
Where to get ATI Silencer 5 Rev 2?

clandren: Already tried...... as I said, everywhere seems to be out of stock :(.... Nickel020: Yeah.... the Zalmans are just a little bit costly though... was hoping not to spend as much, but apparently I'm hosed on getting an ATI Silencer... the Silencer would have done everything I need. I...
- aelfwyne
- Post #4
- Jan 10, 2007
- Forum: Graphics Cards
A
Experience with Newegg recertified video cards??

I've ordered several open box cards from NewEgg.... they will almost always be in an OEM white box with no accessories. I state that because SOME open box stuff from NewEgg tends to come as it was in retail pack (despite the disclaimer) but the video cards are usually OEM boxed. My last was an...
- aelfwyne
- Post #9
- Jan 10, 2007
- Forum: Graphics Cards
A
Where to get ATI Silencer 5 Rev 2?

My ears are in pain from the fan on my Sapphire x850XT video card! I have been looking for an ATI Silencer 5 Rev 2 (the one that fits this card), but everywhere I go is sold out. Does anyone know where I might be able to find one in stock?
- aelfwyne
- Thread
- Jan 10, 2007
- Replies: 7
- Forum: Graphics Cards
A
Case ventilation

As others have said, proper air flow through a case can actually be better than an open case. I've finally got mine working like it should. CPU temps drop slightly if I open the side panel, but the chipset temps go up. This is due to the fact that the fan on the chipset is so small, it really...
- aelfwyne
- Post #8
- Dec 6, 2006
- Forum: Cases & Cooling
A
noob OCer needs help with MOBO selection

Perhaps not compatible with the full Aero effects, true, but they will operate in some mode at the minimum. Even my 5 year old HP notebook meets (barely) the minimum requirements. As far as what VooDooAddict has pointed out, I'm not familiar with how onboard video interacts with...
- aelfwyne
- Post #5
- Nov 29, 2006
- Forum: Motherboards
A
asrock 939 dual vsta dual channel question

You'll need to have an even number of sticks for dual channel. Either 2 or 4. I'm not even sure if it will run with 3, many boards require 1,2 or 4 as a configuration (with 1 obviously not being dual channel)...
- aelfwyne
- Post #2
- Nov 29, 2006
- Forum: Motherboards
A
Looking to Upgrade my Processor

I would've gone for the 170 at $184 myself... save $50 and basically the same overclocking potential.
- aelfwyne
- Post #9
- Nov 29, 2006
- Forum: CPUs and Overclocking
A
Broken CPU Pin.. Help!

Honestly I don't think an A64 3000+ is going to be worth what a jeweler would cost to repair it. Try some of the tips here, if it runs without it - great. Otherwise, time for an unplanned upgrade :)
- aelfwyne
- Post #8
- Nov 28, 2006
- Forum: CPUs and Overclocking
A
On a Budget Need Upgrade Advice

I would have to say "Mostly" to that. I upgraded from a 9800 Pro to an x800 GTO (that I then flashed to 16 pixel pipes). There was a significant difference in framerates, and games such as Oblivion were much more playable than before. I would definitely consider it an upgrade. The x850 is yet...
- aelfwyne
- Post #4
- Nov 28, 2006
- Forum: CPUs and Overclocking
A
noob OCer needs help with MOBO selection

As far as graphics, you'll want onboard graphics for your situation. The purists will disagree, but that's my opinion. Sure, Windows Vista will require heavy graphics horsepower when it comes around. However, the onboard should sufficient, and if it isn't you can upgrade when DX10 cards are less...
- aelfwyne
- Post #2
- Nov 28, 2006
- Forum: Motherboards
A
On a Budget Need Upgrade Advice

To keep that RAM you'll want to stay with socket 939. Best bets there are for the CPU choice to go with a dual-core Opteron 165 or 170. Motherboard choices, there are many if you want PCIe. DFI LanParty NF4 series is good from what I hear, and is what I've ordered to replace the lousy ASRock I...
- aelfwyne
- Post #2
- Nov 28, 2006
- Forum: CPUs and Overclocking
A
New motherboard (again), PSU compatibility

I have read that one of the problems with the 20-pin is resistance between the connector and the mb... If it will work without the adapter, for this reason, I'd rather avoid the adapter. The Antec True430 has gold-plated connectors (or so Antec claims), so that has to be better than running...
- aelfwyne
- Post #3
- Nov 28, 2006
- Forum: Motherboards
A
New motherboard (again), PSU compatibility

I have an Antec True430 PSU that I paid a pretty penny for, and honestly am not wanting to give up. After RMA'ing my ASrock, I ordered a new DFI LanParty NF4 Ultra-D... I am NOT planning to do SLI (in fact, it won't do SLI). The board specifies a total of at least 25amps on +12v. My Antec...
- aelfwyne
- Thread
- Nov 28, 2006
- Replies: 2
- Forum: Motherboards
A
About to RMA asrock 939 dual vsta....

I cancelled the replacement order, since they're refunding the 939DualVSTA to begin with, and placed an order for a DFI LanParty NF4 Ultra D... a bit more cash... and I was required to buy a new video card, but I found a good deal on an x850xt, and ebayed my x800GTO... which has already sold for...
- aelfwyne
- Post #11
- Nov 28, 2006
- Forum: Motherboards
A
About to RMA asrock 939 dual vsta....

RMA'd.... waiting on a cross-ship before I send this one back. After reading the reviews on NewEgg, I honestly don't hold out much hope for a replacement board either. I'm wondering if I should have them replace it with a different board instead - but then I'd either be stuck forever on AGP, or...
- aelfwyne
- Post #10
- Nov 27, 2006
- Forum: Motherboards
A
ASrock Dual939-VSTA Lan Driver Issues, AGP too

Meh.... just as I was coming to check this thread to say I thought I'd found the problem (Cool N Quiet), my IDE drives simply "disappeared" from view. They no longer exist as far as windows is concerned. This has happened several times on this board, except this time CNQ is disabled, so it is...
- aelfwyne
- Post #5
- Nov 27, 2006
- Forum: Motherboards
A
Does the 4200+ X2 come with a heatpipe cooler?

That may be the case.... I think you're right, the pipes are just routed differently. It doesn't look like the one in the review in any case, the offset is different, and the fan is "sunk in" on this one where it sits on top on the one in the review.... I'd like to see a review of the current...
- aelfwyne
- Post #8
- Nov 26, 2006
- Forum: CPUs and Overclocking
A
About to RMA asrock 939 dual vsta....

Oh, and I'm using Patriot PC4000 ram.... Not the highest quality, but it has received good reviews from around the tech sites that I've looked on.
- aelfwyne
- Post #8
- Nov 26, 2006
- Forum: Motherboards
A
About to RMA asrock 939 dual vsta....

Actually, the dual-VSTA has different bios than the dual-SATA2.... the latest is 1.3, which is only a very minor update from the 1.2 the board came with. I still flashed it, just in case. I've noticed that the biggest stability boost comes from turning off Cool'N'Quiet, which I'm rather...
- aelfwyne
- Post #7
- Nov 26, 2006
- Forum: Motherboards
A
About to RMA asrock 939 dual vsta....

Nope, not a memory problem. Note where I said all of this was stable in the previous motherboard. If it is a memory problem, it would be due to this motherboard not providing enough voltage. I have it on high, since 2.8v is suggested for my current memory.
- aelfwyne
- Post #5
- Nov 26, 2006
- Forum: Motherboards
A
My previous OC setting from 1 year ago no longer works?

Check for a dust-clogged heatsink on the CPU? Loose retaining clip on the HSF? Failing that, and if it isn't a BIOS issue... maybe you've got something on your mobo overheating that wasn't before.
- aelfwyne
- Post #3
- Nov 26, 2006
- Forum: CPUs and Overclocking
A
Does the 4200+ X2 come with a heatpipe cooler?

What I want to know, is why that review claims that the Opteron 165 comes with the 4-pipe cooler in retail as early as January, yet what actually came with my Opteron 170 in November was a 2-pipe cooler? I have a very recent stepping, so it obviously wasn't produced before the changeover...
- aelfwyne
- Post #6
- Nov 26, 2006
- Forum: CPUs and Overclocking
A
Will an Opteron work on my motherboard?

I'd have to agree on the "not applicable bit".... It looks to me like that board may have issues supporting dual core at higher clock frequencies. Though I'm not sure why an Opteron 170 works, an Opteron 175 doesn't, but an X2 4800+ does work... since the 4800+ is actually running at a faster...
- aelfwyne
- Post #5
- Nov 26, 2006
- Forum: Motherboards
A
About to RMA asrock 939 dual vsta....

My 939 dual vsta has been nothing but trouble. I have reinstalled Windows, both XP and Vista numerous times and neither is stable. Some problems seem to be outside of windows as well... It takes a long time to recycle when doing a reboot, sometimes never coming back up unless I powercycle the...
- aelfwyne
- Thread
- Nov 25, 2006
- Replies: 10
- Forum: Motherboards
A
ASrock Dual939-VSTA Lan Driver Issues, AGP too

Yes, Antec True 430... it is up to task. I do believe I know how to plug power connectors, thank you very much.
- aelfwyne
- Post #3
- Nov 25, 2006
- Forum: Motherboards
A
Tuniq Tower Fan Question

Easy enough answer - watch your temps. Put the system under a full load with one fan, then with the other. See if there's any difference. If there is a difference, is it an acceptable one to you?
- aelfwyne
- Post #2
- Nov 25, 2006
- Forum: Cases & Cooling

RESOURCES

Top Bottom