Search results

  1. S

    Workgroup problems

    I know the NIC works because I can access the internet from the rig. The ip is consistent and does not match any other rig on the network. I have tried entering the unc address but to no avail. I'm not sure why installing netbeui would be a good idea as it is an "unsupported" protocol and I...
  2. S

    Workgroup problems

    I have three machines, two running XP HOME and one running OS X Leopard. All are members of the same WORKGROUP. Network setup was run on both XP boxes and are configured with File/Print sharing on. However, when I go to workgroup computers on rig A it doesn't even see itself in a workgroup...
  3. S

    Internet connection turns on PC

    I know that it's not in the BIOS because that hasn't changed. All that happened was I rebuilt my system drive. I know it's my network connection because if I unplug the ethernet cable it doesn't do it. I may sound crazy, but I have found this setting once before and it fixed it. It's buried in...
  4. S

    Internet connection turns on PC

  5. S

    Internet connection turns on PC

    Whenver I turn off my computer my ethernet connection seems to turn it back on. I don't have this problem if I put my computer in standby mode, only if I hibernate or turn it off. I had this problem before and managed to fin some setting in XP that solved it, but since then my HDD has crashed...
  6. S

    No power up

    So, last night I put my rig in lower power standby and today when I come in to wake it up I notice the power LED blinking on and off. I push the power button to wake up the rig and nothing happens. I don't have any signs of power other than the power LED under the power switch. Did my PSU die or...
  7. S

    POST problem

    Thanks for the reply, I'm not OC'ing and haven't touched my memory settings.
  8. S

    POST problem

    When I turn on my computer I get a beep, the post screen comes up, it lists my CPU and then nothing happens. However, if I shut it down and then turn it back on everything is fine. Any ideas? Specs: Athlon FX-55 K8N Neo4 Platinum/SLI 1GB Corsair TwinX PC3200XL Pro BFG GeForce 6800...
  9. S

    K8N Neo4 Platinum/SLI

    I do not have that specific option but I already checked to make sure that everything that can wake the system is disabled.
  10. S

    K8N Neo4 Platinum/SLI

    I posted this over in the Motherboard forum but no one has responded. This is my second MB of this make and model and I now have the same problem I did with the old one. I have my DSL connected to the Marvel LAN port and whenever it recieves a ping from the DSL modem it boots the computer...
  11. S

    K8N Neo4 Platinum/SLI

    ANYBODY?
  12. S

    K8N Neo4 Platinum/SLI

    Alrighty, I'm getting pretty frustrated, so any help would be appreciated. This is my second MB of this make and model and I now have the same problem I did with the old one. I have my DSL connected to the Marvel LAN port and whenever it recieves a ping from the DSL modem it boots the...
  13. S

    XP+Norton 2005 Activation=BAD

    I have tried it on both my Raptors (they're both new). I'm thinking it may be a problem with my ethernet ports. After posting this topic I turned off my system and went to watch some TV. Walked back into the room an hour later and it had turned itself back on. I checked the bios to make sure...
  14. S

    XP+Norton 2005 Activation=BAD

    OKay guys, I'm about at my wits end and just don't know what else to do. My new rig worked perfectly (see description below), I came home Friday, turned it on, was looking at my email, and then I got norton pops up and says I need to activate it. I had already done this but proceeded to go...
  15. S

    How difficult is it to remove the backplate on the MSI NEO4 Plat?

    I managed to do it on mine with the use of a hairdryer on low heat. You have to hold it fairly close to the board, but when the glue holding the backplate gets hot it releases fairly easily. One note however, if your RAM has a large heat spreader on it the Zalman 7000b may partially block the...
  16. S

    memory error while running memTest

    Its a ddr deck. I completely forgot that PC100 is sdram. I think I must need more sleep. Thanks guys.
  17. S

    memory error while running memTest

    Tried with no improvement. Anybody know if I can use this old PC100 RAM I have lying around in the meantime?
  18. S

    Lian Li mid tower with 120mm fans an no top blowhole?

    I have seen those, but I didn't think they were stock. I have a V1000b with no blowhole. Although I do like the sound of having a blowhole.
  19. S

    memory error while running memTest

    Ran each DIMM seperately in same slot, ensuring each was well seated. One DIMM checked out good, the other was loaded with errors. Changed slots and same result. I'm off to RMA. Grrrrrrr. Thanks for the help guys.
  20. S

    memory error while running memTest

    Crap. Thanks BouZouki.
  21. S

    memory error while running memTest

    Well, I stopped the test, went into the bios, changed the voltage from auto to 2.75 (what it is rated at) and am re-running memTest. I already have one error at 50% coverage.
  22. S

    memory error while running memTest

    Thanks, I got that far. I suppose my question is, is it a hardware issue and i need to RMA, or a setup issue? I haven't changed any RAM settings in my bios.
  23. S

    memory error while running memTest

    I get the following error: "Error found with word pair# 11699074, values 3355098174, 3353001022 do not match." Could sombody tell me what that means? Thanks in advance.
  24. S

    FX-55 temps

    Thanks for the replies. I'm still in the testing phase, but i'll keep everyone posted.
  25. S

    Lian Li mid tower with 120mm fans an no top blowhole?

    Correct. Look at the V series.
  26. S

    FX-55 temps

    I've finally got my new system up and running with the followig components: AMD FX-55 MSI K8N Neo4/SLI Platinum 1 GB Corsair TwinX 1024-3200 XLPRO BFG GeForce 6800 Ultra OC Zalman 7000b-Cu PCP&C 510 SLI Lian-Li v1000b WD 76GB Raptor x2 My current temp at idle is 39C an my under full...
  27. S

    PC P&C 510 SLI

    Thanks.
  28. S

    PC P&C 510 SLI

    Anybody got one in a Lian Li V-1000?
  29. S

    PC P&C 510 SLI

    I have a Lian Li 1000B and I was wondering if there is any form of venting on the bottom of the 510 SLI. The Lian li has a lower vent for cooling the PSU but very little room behind the PSU for air flow.
  30. S

    It WORKS!!!............Well, it DID work.

    I have found the prob. If I wiggle the power cord to the MB it will turn on. So, it would seem I have a short in one of the leads from my psu. CRAP! But atleast now I know. Thanks guys. I'm off to RMA. >:-(
  31. S

    It WORKS!!!............Well, it DID work.

    Already tried that. No luck. I do have a random case laying around so I was thinking about hooking up just its power switch to the new rig and see if that worked. Then it would prove if its a bad switch. EDIT: It's not the switch.
  32. S

    It WORKS!!!............Well, it DID work.

    Okay, so I just finished putting my new system together: FX 55 Zalman 7000B 1GB Corsiar XMS BFG 6800 Ultra OC WD 74 GB Raptor x2 TDK DVD RAM FDD Lian Li 1000B Enermax Noisetaker 600w I turned it on, it POSTs fine. I set the clock in the BIOS. I save and exit bios. Reboot. Get...
  33. S

    MSI K8N Neo4 Platinum

    bump
  34. S

    MSI K8N Neo4 Platinum

    I posted this in the official thread but thought I would also post it out here for any that might know: Alrighty, maybe i'm a moron, but I have a Zalman 7000B-Cu and to install it I have to change the back plate, so I go to change it and the MSI one won't come off. I have unscrewed both...
  35. S

    *** Official MSI K8N Neo4 Platinum (nForce4 Ultra chipset) Thread ***

    Alrighty, maybe i'm a moron, but I have a Zalman 7000B-Cu and to install it I have to change the back plate, so I go to change it and the MSI one won't come off. I have unscrewed both screws and the damn thing seems stuck. I'm sure there is some trick I don't know so I thought I'd ask. Thanx...
  36. S

    BFG 6800 Ultra

    While trying to pick a solid and (hopefully) quiet power supply for use with two of these cards I found that I didn't know the amps these cards pull. Anybody? Thanks in advance.
  37. S

    looking for a solid & quiet psu

    Does anybody know the amps pulled by a BFG 6800 Ultra OC?
  38. S

    looking for a solid & quiet psu

    This is going to sound exceptionally sad, but I hate the Green LED Fan on the OCZ Powerstream 520.
  39. S

    looking for a solid & quiet psu

    How hard is it to install an Arctic Cooling unit? That's one thing I have never done.
  40. S

    looking for a solid & quiet psu

    With all the concerns over dual rail psu's I've reconsidered my preference for an Enermax Noisetaker 2.0 SLI and was wondering how the above psu compares in terms of noise/stability. I will be running an FX-55 rig with dual BFG 6800 Ultra's in a Lian-Li v1000B case. Thanks in advance.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |