Ok this is confusing which slot should my video card be in on this board? a8n sli deluxe? the one closest to the cpu? or the one farthest away? I noted the my sli chip was set to dual from the factory. The book said it was set to single by default from the factory. I read the manuel numerous...
The 550 setting locks it right up. So what I did was set the DDR to the 400 setting and I went through every page and put my timings to the lowest number and rebooted. I have 1-t ,2.0 ,2 and ect. I have no idea what the heck I am doing now. I am at the point to were I just change things to see...
OK here is my issue which slot do you put the card in if you are running only 1 video card? The blue slot?
or the brown slot? is the board set up by default for 1 video card or 2? On the board the vc selector has arrows for 1 or 2 vc's do you follow that I cant get asus to call me back it has...
ok I should put my video card in slot number 1 right? thats the blue 1..... I have a BFG 6800gt pci e
I cant figure out why these 3dmarks are bad...... like i can only get 4875...... I have the latest drivers and such....
not good trying some other stuff.... I wish they would print a how to guide for my set up like put you cpu voltage at this put you mem volts at this ect..... pulling my hair out... I wish they would make the cmos easier to clear....l
I bought twinx 1024-4400c25 ddr550 xms 4400 from corsair for 269. But the Asus a8n deluxe sli board hangs on the 550 setting. Other than that its good mem..........
Ok what I have learned so far do not set you mem to ddr 550. I causes the sytem to hang will not boot.
Mr cmos clearing must come save the day if you do this. I cant figure out mem timings for this board with the mem I have. I have corsair twinx 1024-4400c25 ddr 550 xms4400 1 gig of it and have...
that is just the 550 setting with all other mem settings set to auto... so setting your mb to 550 makes the sytem hang ......its a bug its a bug ...... I want my system to rock but me getting upset...... Oh sorry was in my ffxi mode me a taru whm.....
my system hangs on the 550 settings had to reset the cmos to get back into the mobo me confused...
I still have my mobo at auto on mem settings any other ideas??
ya ill start with putting the dram at 550 reboot.. then 2.5 reboot if its still working 4 ras and ect... just leave everything at auto till i hit the trouble maker
Well tried it they hyper x5 is ok however the mem timings caused the sytem to hang not boot. I am the master of cmos clearing now!!!! the sytem would not use its auto recovery to prevent system hangs so I had to remove the battery and flip the jumper to get it back up... I want to change my name...
Sorry guys this is my mobo
Amd fx 55.
Asus A8n sli deluxe.
BFG 6800 GT PCI E.
Antec 550 power supply.
74 gb western sata digitial hrd running @ 10k.
1 gig corasir Twinx 1024-4400c25 DDR550 xms4400.
Plextor sata DVD Burner.
Audigy 4 sound card.
Thermal Take shark case.
I have no Idea...
Hey guys maybe if we can tell each other bios settings we are using it may help.
I have an amd fx 55 1 gig corsair twinx 1024-4400c25 ddr 550 xms 4400 bfg gf6800 gt pcie antech 550 ps
asus a8n sli deluxe.. plextor sata dvd drive and western digtial raptor 74 gb... any settings would be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.